Handlebar Grips/Tape

SRAM's Locking Foam Grips offer the soft feel of foam with the easy installation and security of a lock-on grip.

- Clear, gel pads provide added shock absorption while positioned between the lever hood and top-handlebar transition under handlebar tape - Two, left and right sets with integrated channels for either inside or outside, under tape cable routing

SRAM's Locking Foam Contour Grips offer the soft feel of foam with the easy installation and security of a lock-on grip.

• Replacement locking handlebar grip sets for XX1 Grip Shift • includes one 100mm right and one 122mm left grip • Available in black or silver.

SRAM's RED Bar Tape is perfect for upgrading your handlebars and adding comfort and style to your bicycle, too. You get enough handlebar tape to wrap both sides, S logo plugs for a touch of class, and a texture that matches SRAM's RED shifter/brake hoods.

SRAM's Locking Grips have clamps on both ends for a secure bar hold. Their rubber surface and "S" logo design offer a great feel.

SRAM's SuperCork Bar Tape boasts a soft, stylish suede finish for a great grip and feel with or without gloves.

When you're going fast, you need to hold on to something. SRAM's DH Silicone Locking Grips have you covered with clamps on both ends for a secure bar hold. Their rubber surface with thumb donut and "S" logo design offer a great feel.

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance.

• Replacement locking handlebar grip sets for X0 and XX Grip Shift • Available in 100mm and short length 85mm shifter with interlocking Grip Shift interface and single bolt clamp. • Available in full-length 122mm grips with dual locking bolt clamps. • Available in black and silver.

Keep your bike looking good with SRAM's HydroR Lever Hoods. They're made of a soft, grippy rubber and are a great replacement hood for HydroR levers.

The 70X Gravity and E-Performance Grip offers the perfect grip ergonomics for experts. The gravity and downhill grip offers maximum control and grip in rough terrain, even in wet and muddy conditions. The special textured zone of the front and bottom side provides optimal support for the fingers. The exterior side ensures the needed comfort. The clamp is located inside and the clamping sleeve at the (inner) third of the grip. This increases the shock absorption and comfort on the hand’s outer side. Various rubber compounds ensure a perfect grip level and high comfort. We only use the best possible materials to avoid sticky/gummy rubber. The personal grip size is what matters. With the 7OX grip, the sizes differ in diameter and shape. This grip is a bit more difficult to install because the clamping is inside and only on the inner third. Use a bit of brake cleaner to slip the grip onto the handlebar very easily and it tightens up very quickly. - Weight (g) / pair: 132, 155 - Diameter at Smallest Point (mm): 97, 101 - Material: Proprietary Rubber Blend

The 710 Tour and Travel Grip features a well thought-out shape, with the wings pulled down far, making the perfect combination of comfort and driving dynamics. The 710 user is a comfort-oriented mountain biker or a sporty trekking biker. This relief wing, which is located at the very edge and deeply extends downwards, frees up space for securely grasping the grip body in all situations. The raised end of the grip externally nestles against the side of the hand, while the inside is somewhat more elevated. As a result, it specifically relieves the ulnar nerve, the median nerve, and the carpal tunnel. The clamp is located on the inner side of the grip. This increases the shock absorption and comfort on the hand’s outer side. It is not compatible with twist grips. Various rubber compounds ensure a perfect grip level and high comfort. We only use the best possible materials to avoid sticky/gummy rubber. This grip is a bit more difficult to install because the clamping is inside and only on the inner third. Use a bit of brake cleaner to slip the grip onto the handlebar very easily and it tightens up very quickly. - Weight (g) / pair: 238 - Diameter at Smallest Point (mm): 91, 101, 106 - Material: Proprietary Rubber Blend

- 1-piece, integrated Lock-On grip. - Exclusively fits 19mm bar ends. - Dual Density Design. - Smaller 25-26mm outer diameter. - Smaller 115mm length. - Tapered and slotted core to eliminate slippage. - Plush SDG Icon pattern for superior grip control and vibration dampening.

- Dual Density Design - Integrated, 1pc Lock-On - Tapered Inner Core – prevents slippage - Mushrooms for ultimate comfort - Ergonomically ramped and undercut grabbers for superior grip - Ovalized design for ultimate comfort and control - Circular Iconic dampers - Flared outer ends

- Dual Density Design - Integrated, 1pc Lock-On - Tapered Inner Core – prevents slippage - Mushrooms for ultimate comfort - Ergonomically ramped and undercut grabbers for superior grip - Ovalized design for ultimate comfort and control - Circular Iconic dampers - Flared outer ends

The TwistLoc remote and grip set maximizes efficiency and space, while keeping your hands safely on the bar. Twist to lock, push the button to unlock on forks, rear shocks or both in tandem. - Curved “CRVD” vs. and straight “STRT” cable options (see photos for reference) - Encouraged for XC, Trail, and Enduro usage - Easy action - Twist to lock, push button to release - Fixed grips included

- Made with DuPont Kevlar brand resin for softer, tackier and longer lasting grips - Used by top professional racers around the world

- Knurled grip section for ultimate control - Block pattern outer edge for durability - Medium flange for added control and shifter compatibility - 135mm length - Secure, expander end-plugs - The Ultra Tacky compound gives ultimate control in all conditio

- Integrated grip body and locking collars for ultimate durability - 6082 T6 aluminum CNC machined collars - Diamond knurl pattern - Smooth profile end transition, for maximum comfort - Snap-fit end caps - Made in the UK

- Integrated grip body and locking collars for ultimate durability - 6082 T6 aluminum CNC machined collars - Diamond knurl pattern - Smooth profile end transition, for maximum comfort - Snap-fit end caps - Made in the UK

- Integrated grip body and locking collars for ultimate durability - 6082 T6 aluminum CNC machined collars - Diamond knurl pattern - Smooth profile end transition, for maximum comfort - Snap-fit end caps - Made in the UK

- Integrated grip body and locking collars for ultimate durability - 6082 T6 aluminum CNC machined collars - Diamond knurl pattern - Smooth profile end transition, for maximum comfort - Snap-fit end caps - Made in the UK

- 4 compounds: medium, soft, super comfort (extra-soft) or Kevlar version with suspended Kevlar particles for the ultimate tacky yet durable grip - Machined 6082 aluminum collars lock tightly with integrated grip core - 30mm outer diameter knurled grip

- CNC aluminum locking collars - Different levels of grips for different uses - Grip Length: 130mm - Handlebar Diameter: 22.2mm - Outer Diameter: 30.5mm

Everything's Alright We think that the best path to a happy life is to ride as often as possible. These grips have the perfect combination of tackiness, durability, and cushioning to keep you in the saddle and on the sunny side of life. Special Recipe These grips are made of a proprietary rubber compound that only Race Face can make. We could tell you what's in them, but then we'd have to kill you. Hold Fast Designed to stay put, these low-profile grips have a lock-on collar, tapered internal sleeve and directional design—no drama here, just solid comfort. A Real Handful. Two diameters (30mm+ 33mm), 5 solid colors, 5 black with ano'd lock collar options. Don't worry—with the Getta Grip you get all the choices.

Race Face Half Nelson Lock-On Grips • Super-slim profile • Race Face MX style half waffle for extra grip security • Topographical moisture channels • Compatible with ODI lock jaw clamps

Grippler gives you the moisture shedding, long gripping sensation you crave, with the hard wearing resilience you expect from Race Face. Our proprietary compound and diamond buff finish feels great with both gloves and bare hands - and with ramped grip profile on finger-side plus varied grip depth on palm-side, Grippler will bring you to a higher level of digitization. Available now in 10 colours, and two sizes, the Grippler surpasses industry standards for gripabilty. And now with Double Lock Ons the Grippler EVEN GRIPS ITSELF. Get a grip, with the Grippler. - Directional ramped logo underside - Proprietary compound extends over Dual Lock Ons - Vibration dampening, hard wearing, moisture shedding

Profile Design's Bar Wrap is a synthetic handlebar tape that offers a nice grip, padding for comfort and that comes in many colors and designs to add some bling to your road bicycle. It's also stretchy and extra long for easy installation, and durable, too.

Give your bike some personality and a comfy ride with Profile Bar Wrap. This beautiful handlebar tape will definitely make you stand out in a crowd. And, with extra stretch and length, it's easy to wrap, too!

Give your bike some personality and a super comfy ride with Profile Bar Wrap. The gel cushion damps vibration better and leaves you fresh so you can go longer. It comes in many colors for customizing your ride. And, with extra stretch and length, it's easy to install, too.

Give your bike some personality and a comfy ride with Profile Karbon Bar Wrap. The simulated carbon look adds some style to your ride. With extra stretch and length, it's easy to install, too. Plus, it comes with Profile's Karbon plugs.

The Oury Original BMX Grip will provide you with performance and comfort. Flanged grips with rectangular design and Oury logo. Classic.

Oury single compound grips. Simple & classic. - Soft grips with raised blocks

Oury single compound grips. Simple & classic. - Soft grips with raised blocks

Oury single sided V2 lock-on grips.

The classic Oury feel updated with lock-on from ODI. Bonus pack includes snap-caps and Lock Jaws. - Made by ODI - Snap-caps and Lock Jaws included

A low profile single lock on grip, designed to reduce arm pump and hand numbness. The Diamond knurled texture, with saw tooth finger ramps and a super tacky 20A compound provide ultimate traction. More traction means less death-gripping the bars and less arm pump. Our single lock has the profile of your favorite double lock-on. But to reduce hand numbness we've replaced the hard outer clamp with extra rubber for greater cushioning of your palm heel. Get all the benefits of an “ergonomic” grip without the city bike cruiser look! SPECS - Weight: 97g (Pair) - Length: 136mm - Diameter: 30mm

The Thick Grips are designed to maximize grip and minimize arm pump by giving you extra cushioning, a softer compound and added features for a fully locked in feel. The subtle palm bulge and ridges on the underside fit in the creases of your fingers for a locked-in feel. Specs: Weight: 144g (Pair) Durometer: 20A Length: 138mm Diameter: 35mm max 32.5mm min Features: Diagonal thumb ribs Finger ridges underneath the grip Palm bulge with mini cushion pads Offset grip has more material on top for extra cushioning Durable grip ends Mini flange Grips are compatible with all 22mm diameter handlebars.

The Thin Grips are 29mm diameter. The low-profile design maximizes bike feel and control. A simple, streamlined design for riders who want a precision feel. Specs: Weight: 106g (Pair) Length: 138mm Diameter: 29mm Durometer: 25A Features: Diagonal thumb ribs Palm heel mini cushion pads Durable grip ends Grips are compatible with all 22mm diameter handlebars.

- Enough clamp bolts for 4 clamps

The attack mountain bike grips offer legendary performance preferred by top athletes for over two decades. - Classic mushroom style rib pattern - Durable grip compound - Excellent shock absoprtion from rib pattern - Thick rounded ends to protect against grip blowout

"O" Grips for BMX offer an improved feel right out of the box and improved traction from the multi-directional rib pattern. - New softer durometer compound offers improved comfort right out of the box - Multi-directional rib pattern provides excellent shock absorption - Thicker O-shaped ribs offer improved control - Includes Push In Style end plugs

The classic Longneck ribbed grip pattern with an open end to accomodate end plugs now comes without a flange! - Classic mushroom style collapsible rib pattern - Constructed of our proprietary Soft Grip compound for added comfort - Increasingly popular with top athletes around the world - Open ends with black and white Two Color Push In Plugs end plugs included

The classic Longneck ribbed grip pattern with an open end to accomodate end plugs. - Classic mushroom style collapsible rib pattern - Constructed of our proprietary grip compound for comfort and durability - The grip of choice for top athletes around the globe - Open ends with Thug Plug end plugs included

The classic flangeless Longneck ribbed grip pattern with an open end to accommodate end plugs now gets an extra 25mm of length! PRODUCT FEATURES: - Classic mushroom style collapsible rib pattern - Constructed of our proprietary grip SOFT compound for added comfort! - Increasingly popular with top athletes around the world - Open ends with Push In Plugs end plugs included - Sold In Pairs - 160mm

The Cult Vans grips feature a classic Vans waffle pattern and are made by ODI in the USA using their proprietary rubber compound. - Made in the USA by ODI - Length: 150mm

The Cult Vans grips feature a classic Vans waffle pattern and are made by ODI in the USA using their proprietary rubber compound. - Made in the USA by ODI - Length: 150mm

- Made from ODI proprietary soft compound material - Classic Ribbed design provides improved vibration dampening - 160mm Length - Push-in style end plug - Handlebar Diameter: 22.2mm

F-1 Series Float Grips are made from our exclusive A.I.R.E. compound which infuses air into the grip, reducing weight by over 30% and providing a slower rebound and response for improved comfort. - Medium diameter (31.5mm) - Reinforced inner layer for added durability - Micro-textured surface pattern improves tackiness and control - Smooth profile for a consistent feel

F-1 Series Vapor Grips are made from our exclusive A.I.R.E compound which infuses air into the grip, reducing weight by over 30% and providing a slower rebound and response for improved comfort. - Medium diameter (31.5mm) - Reinforced inner layer for added durability - Added surface pattern provides improved grip in all conditions - Ergonomic finger cutouts for a better gripping surface and improved control

- Aluminum clamps secure the grip on both ends with a hex-broach pinch bolts - For 22.2mm (7/8") bars - Packaged for 1 pair/set of grips and includes Snap Cap end plugs

ODI Bjorn lock-on V2.1 grips. Made from recycled post-industrial rubber from ODI's manufacturing, the Bjorn grips have an offset center to provide additional cushion without extra bulk. - Made from recycled TPE rubber - Single-sided lock on

ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. - Offset grip design provides padding where it is needed most - Variable knurl pattern provides comfort/traction where you need it most - Version 2.1 Lock-On System - Soft Pro compound for excellent shock absorption - Reinforced soft ends for added durability - Super slim profile

- Ergonomic design conforms to riders hand without feeling bulky, provides padding where it is needed most - Half-Waffle pattern on the front of the grip provides extra control when you are off the back of the bike - NEW SINGLE CLAMP—Version 2.1 Lock-On System for more usable grips space and improved comfort on the outside of the grip - Variable knurl pattern alternates from smooth to sharp texture to provide more traction without irritating your hands. - Reinforced End molded out of soft, but durable material to prevent grip blowout.

- Ergonomic design conforms to riders hand without feeling bulky, provides padding where it is needed most - Half-Waffle pattern on the front of the grip provides extra control when you are off the back of the bike - NEW SINGLE CLAMP—Version 2.1 Lock-On System for more usable grips space and improved comfort on the outside of the grip - Variable knurl pattern alternates from smooth to sharp texture to provide more traction without irritating your hands. - Reinforced End molded out of soft, but durable material to prevent grip blowout.

The Elite Pro grips feature an ergonomic design that conforms to a rider's hands without feeling bulky. - Single clamp design - Half-waffle pattern on the front of the grip provides extra control when you are off the back of the bike - Length: 130mm

The grip choice of top athletes around the world, the Ruffian Lock-On Grip features exceptional control in a low profile grip designed specifically for racers. - Diamondized pattern for optimal traction - Ultra-thin profile - Lock-On Grip System = 100% Slip-Free performance - Includes new Snap Cap End Plugs

When two companies known for creating comfortable products collaborate, you know the results are going to be good. THE SDG GRIP FEATURES: - A Unique circular ribbed dampener which spread pressure across your palm while still providing excellent control - The front side of the grip features ergonomically ramped logos that act like hooks for your fingers and provide excellent traction when hanging off the rear of the bike - Lock-On Grip System = 100% Slip Free performance - Includes Snap Cap End Plugs - Color match to your SDG Duster seat

Two Southern California originals have teamed up to create a modern-day classic design. Featuring the classic Vans waffle sole pattern and constructed from ODI's proprietary grip compounds for a consistent feel that provides exceptional control in all conditions. Available as part of the patented Lock-On Grip System for guaranteed slip-free performance and simple installation. For MTB, BMX, ATV, and PWC applications. - Iconic Vans Waffle sole pattern utilizing ODI's proprietary grip compounds - Provides exceptional feel and control in all conditions - Aluminum clamps secure the grip on both ends using a hex wrench