Wheels

The Discus Plus C30 Team is 3T's carbon wheelset from the Discus Plus range of 27.5-inch wheels: Center Lock disc-brake hubs, 34mm wide, tubeless-ready rims, and 24F/24R spoking make this wheel ideal for new-wave adventure bikes. The Team wheels exploit carbon's lightweight properties to go to 28mm inner width. The Discus Plus build is similar to Discus, utilizing the 3T linear+ system with asymmetric rim drilling to reduce the difference in spoke tension between the drive side and non-drive side. Hubs have light, alloy oversize spindles with modular end-caps that can be easily swapped from quick-release to thru-axle as needed.

The Discus Plus C30 Team is 3T's carbon wheelset from the Discus Plus range of 27.5-inch wheels: Center Lock disc-brake hubs, 34mm wide, tubeless-ready rims, and 24F/24R spoking make this wheel ideal for new-wave adventure bikes. The Team wheels exploit carbon's lightweight properties to go to 28mm inner width. The Discus Plus build is similar to Discus, utilizing the 3T linear+ system with asymmetric rim drilling to reduce the difference in spoke tension between the drive side and non-drive side. Hubs have light, alloy oversize spindles with modular end-caps that can be easily swapped from quick-release to thru-axle as needed; rear width can run 135mm or 142mm.

The Discus Plus is the world’s first wheel range specifically designed for wider tires on all-road/gravel bikes. The advantages are obvious: more grip, more comfort, almost unflattable (is that a word?) so you are practically unstoppable. Wide tires need a wide rim to prevent excessive lateral tire roll and improve cornering, so the Discus Plus Pro has a 24mm inner width (with full hooks), perfectly supporting both MTB and 650B tires. The Discus Plus build is similar to Discus, utilizing the 3T linear+ system. Asymmetric rim drilling reduces the difference in spoke tension between the drive side and non-drive side. And the hubs have light alloy oversize spindles with modular end-caps that can be easily swapped from quick-release to thru-axle as needed; rear width can run 135 mm or 142 mm.

Front and rear skewer set, suitable for MTBs - Durable chromoly axles with lightweight alloy nuts - Tightens with allen key

A tough, tubeless-compatible 29/700c disc wheel built around Center Lock hubs and shipped with handy 6-Bolt adapters for dual compatibility straight out of the box. - Pinned construction, tubeless-ready, asymmetric/offset double-wall rim with 24mm internal width is suited to a wide range of tire widths perfect for either MTB or urban use - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech 135mm OLD alloy QR Center Lock hub w/serviceable cup and cone bearings - Shimano freehub: 8/9/10/11sp MTB compatibility - Reinforced head plain gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 1209g

Lightweight 6061 alloy. - Provides up to an additional 117mm of extension - 1 1/8" - 223g

Thread-on valve cap with core tightener. - Metal

Fits all standard Schrader valves.

Our standard butyl innertube with a 0.9mm wall thickness represents excellent value-for-money and strikes a nice balance between weight and durability. - S/V Schrader Valve (American Valve) with a 40mm valve length for trouble-free double wall rim compatibility - 12 and 14 tubes use angled/shorter valves for improved pump head clearance/accessibility - Easily identifiable from the GREEN color-coded box - Automated hot-feed extrusion with hydraulic press-cured vulcanization for consistent, high-quality, reliable construction - All tubes are inflated and stored for 24hrs to check for leaks/defects prior to being packaged - Low-lead nickel-plated valve with standard removable Schrader valve core - Packaged individually (carton/box)

Our standard butyl innertube with a 0.9mm wall thickness represents excellent value-for-money and strikes a nice balance between weight and durability. - P/V Presta valve (French valve) with 48/60/80mm length options for a wide range of rim depth compatibility - Easily identifiable from the RED color-coded box - Automated hot-feed extrusion with hydraulic press-cured vulcanization for consistent, high-quality, reliable construction - All tubes are inflated and stored for 24hrs to check for leaks/defects prior to being packaged - Low-lead nickel-plated valve with a threaded valve and non-removable core - Packaged individually (carton/box)

Our standard butyl innertube with a 0.9mm wall thickness that represents excellent value-for-money and strikes a nice balance between weight and durability - S/V Schrader Valve (American Valve) with a 40mm valve length for trouble-free double wall rim compatibility - 12 & 14 tubes use angled/shorter valves for improved pump head clearance/accessibility - Easily identifiable from the GREEN colour-coded box - Automated hot-feed extrusion with hydraulic press-cured vulcanization for consistent, high-quality, reliable construction - All tubes are inflated and stored for 24hrs to check for leaks/defects prior to being packaged - Low-lead nickel-plated valve with standard removable Schrader valve core - Packaged individually (carton/box)

Our Enduro butyl tubes see the standard wall thickness increased to 1.2mm (+33%) for improved durability and resistance to pinch punctures, especially pinch punctures. - Suitable for either your mountain bike or road/commuter bike and adds instant additional puncture protection without adding significant weight - P/V Presta valve (French valve) in 48mm length for excellent double wall rim compatibility - Easily identifiable from the BLACK colour-coded box - Automated hot-feed extrusion with hydraulic press-cured vulcanization for consistent, high-quality, reliable construction - All tubes are inflated and stored for 24hrs to check for leaks/defects prior to being packaged - Low-lead nickel-plated valve with a threaded valve and removable core - Packaged individually (carton/boxblack)

Pack of 30 ornaments. - 5 different colors - Fits all standard spoke diameters

Our Plus-sized tubes cover all the popular high-volume sizes from 20 through 29 and utilize our standard 0.9mm thick construction for a perfect balance of weight and durability - P/V Presta valve (French valve) in 48mm length for excellent double wall rim compatibility - Easily identifiable from the PINK color-coded box - Automated hot-feed extrusion with hydraulic press-cured vulcanization for consistent, high-quality, reliable construction - All tubes are inflated and stored for 24hrs to check for leaks/defects prior to being packaged - Low-lead nickel-plated valve with a threaded valve and removable core - Packaged individually (carton/box)

Our fatbike tubes use our 0.7mm lightweight wall thickness (-22%) to help keep the weight in check with the dramatic increase in tire size/volume. - P/V Presta valve (French valve) in 48mm length for excellent double wall rim compatibility - Easily identifiable from the PURPLE color-coded box - Automated hot-feed extrusion with hydraulic press-cured vulcanization for consistent, high-quality, reliable construction - All tubes are inflated and stored for 24hrs to check for leaks/defects prior to being packaged - Low-lead nickel-plated valve with a threaded valve and removable core - Packaged individually (carton/box)

- 0.73mm wall thickness - Fastest, cheapest way to reduce bike weight

2.25mm wall thickness

An affordable and durable 29/700c rim brake wheelset with MTB hub spacing and thread-on freewheel compatibility that's perfectly suited to a wide range of applications from MTB through to urban/commute/trekking. - Alex Rims Z1000 pinned construction single wall rim with generous 20mm internal width suitable for a wide range of tire widths & brushed sidewall - Joytech alloy nutted hubs w/serviceable cup and cone bearings - Plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (silver) w/12mm brass nipples (silver) - Weight: 1054g

An affordable wheel with a durable 36H single wall construction and premium Stainless Steel spokes to fit older/classic road bikes built around the 26 x 1-3/8(590mm ISO) wheel size. - Alex Rims X404 pinned construction classic box-section single-wall rim w/brushed sidewalls - Generous 20mm internal width for compatibility with a wide range of tire widths - Joytech nutted steel hub w/serviceable cup and cone bearings - Hub uses smaller diameter 5/16" axle for compatibility with the smaller fork slots on older Raleigh 3-speeds (compatible with standard 9mm dia. dropouts also) - Straight gauge 2.0mm SUS304 Stainless Steel spokes (silver) w/12mm brass nipples (silver) - Weight: 1109g

An affordable wheel with a durable 36H single wall construction and premium Stainless Steel spokes to fit older/classic road bikes built around the 27-inch (630mm ISO) wheel size. - Compatible with both 27 x 1-1/4 and 27 x 1-3/8 tires (same ETRTO - 630mm) - Alex Rims AP18 pinned construction classic box-section single-wall rim brushed sidewalls a generous 18mm internal width for compatibility with a wide range of tire widths - Joytech nutted steel hubs w/serviceable cup and cone bearings - Straight gauge 2.0mm SUS304 Stainless Steel spokes (silver) w/12mm brass nipples (silver) - Weight: 1184g

Tough-yet-affordable 18-inch (355mm ISO) single wall BMX wheelset that uses a much higher build standard and materials than many original factory-equipped wheels. - Alex Y303 pinned construction single wall rim with 24mm internal width for excellent pairing with modern high-volume tires - Anodized brake track for clean looks - Joytech alloy nutted hubs w/serviceable cup-and-cone bearings - Straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (silver) - Weight: 758g

An affordable and durable 29/700c rim brake wheelset with MTB hub spacing and thread-on freewheel compatibility that's perfectly suited to a wide range of applications from MTB through to urban/commute/trekking. - Alex Rims Z1000 pinned construction single wall rim with generous 20mm internal width suitable for a wide range of tire widths & brushed sidewall - Joytech alloy nutted hubs w/serviceable cup and cone bearings - Conventional thread-on freewheel fitting (7/8/9/10sp compatible) - Plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (silver) w/12mm brass nipples (silver) - Weight: 1149g

An affordable freewheel-compatible wheel with a durable 36H single wall construction and premium Stainless Steel spokes to fit older/classic road bikes built around the 26 x 1-3/8(590mm ISO) wheel size. - Alex Rims X404 pinned construction classic box-section single-wall rim w/brushed sidewalls - Generous 20mm internal width for compatibility with a wide range of tire widths - Joytech nutted steel hub w/serviceable cup and cone bearings - Conventional thread-on freewheel fitting (6/7sp compatible) (axle can be re-spaced for 5sp compatibility) - Straight gauge 2.0mm SUS304 Stainless Steel spokes (silver) w/12mm brass nipples (silver) - Weight: 1243g

Tough-yet-affordable 18-inch (355mm ISO) single wall BMX wheelset that uses a much higher build standard and materials than many original factory-equipped wheels. - Alex Y303 pinned construction single wall rim with 24mm internal width for excellent pairing with modern high-volume tires - Anodized brake track for clean looks - Joytech alloy nutted hubs w/serviceable cup-and-cone bearings - Flip-flop freewheel rear hub 1.375" x 24 tpi thread on one side for 16-22T freewheels / M30 x 1mm (1.181" x 25.4 tpi) on the other side for 13-15T freewheels - Straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (silver) - Weight: 758g

A tough, no-nonsense workhorse 29/700c rim brake wheel that's perfectly suited to a wide range of applications from MTB to urban/commute/trekking. - Pinned construction double-wall rim with generous 20mm internal width suitable for a wide range of tire widths - Stainless Steel eyelets & CNC machined sidewall w/wear indicator - Joytech alloy QR hubs w/serviceable cup and cone bearings - Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (silver) - Not tubeless compatible - Weight: 1035g

A tough, no-nonsense workhorse 29/700c rim brake wheel with MTB hub spacing that's perfectly suited to a wide range of applications from MTB to urban/commute/trekking. - Pinned construction double-wall rim with generous 20mm internal width suitable for a wide range of tire widths - Stainless Steel eyelets & CNC machined sidewall w/wear indicator - Joytech alloy QR hubs w/serviceable cup and cone bearings - Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (silver) - Not tubeless compatible - Weight: 1027g

An affordable and clever dual-duty rim and disc brake compatible 29-inch/700c wheelset that combines MTB hub spacing with screw-on freewheel compatibility for a wheelset that's perfectly suited to trekking, MTB, and urban use. - Alex Rims Z1000 pinned construction single wall rim with 20mm internal width suitable for a wide range of tire widths and ground sidewall - Joytech 6-Bolt disc alloy nutted hubs with serviceable cup and cone bearings - Anodized brake track for clean looks when used with a disc brakes - Conventional thread-on freewheel fitting (7/8/9/10sp compatible) - Straight gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) with 12mm brass nipples (silver) - Weight: 1244g

Tough-yet-affordable single wall rear 18-inch (355mm ISO) coaster wheel that uses a much higher build standard and materials than many original factory-equipped wheels. - Alex Y303 pinned construction single wall rim with 24mm internal width for an excellent pairing with modern high-volume tires - Anodized brake track for clean looks when used with coaster only - KT 305R Nutted 110mm OLD steel coaster hubs w/serviceable cup and cone bearings - Compatible w/3-spline coaster hub sprockets, 16T included - Straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (silver) - Weight: 1213g

A tough, no-nonsense workhorse 29/700c rim brake wheel with MTB hub spacing and thread-on freewheel compatibility that's perfectly suited to a wide range of applications from MTB to urban/commute/trekking. - Pinned construction double wall rim with generous 20mm internal width suitable for a wide range of tire widths - Stainless Steel eyelets & CNC machined sidewall w/wear indicator - Joytech alloy QR hubs w/serviceable cup and cone bearings - Conventional thread-on freewheel fitting (7/8/9/10sp compatible) - Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (silver) - Not tubeless compatible - Weight: 1141g

Tough-yet-affordable single wall rear 20-inch (406mm ISO) coaster wheel that uses a much higher build standard and materials than many original factory-equipped wheels. - Alex Y303 pinned construction single wall rim with 24mm internal width for an excellent pairing with modern high-volume tires - Anodized brake track for clean looks when used with coaster only - KT 305R Nutted 110mm OLD steel coaster hubs w/serviceable cup-and-cone bearings - Compatible w/3-spline coaster hub sprockets; 16T & 18T included for gearing options - Straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (silver) - Weight: 1329g