On-bike

The ultimate set of mudguards for fat tire bikes offering all-round mud protection. Front is mounted easily under the down tube by high-performance straps and the rear fits to the seat post in seconds with the proven tool-free SKS quick-release Powerstrap attachment system. The two-hinge arm in the rear allows perfect adjustability to the geometry of your bike.

SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.

- Smart clip-on front mudguard for road, cyclocross, hybrid, gravel bikes, etc. - Fits a maximum tyre width up to 38mm. - It is the ideal companion to our S-BLADE rear mudguard. - Its smart, double hinged quick release fitting system also fits aero forks. - Paintwork protection film for the frame is included.

The SKS SPEEDROCKER has been specifically developed for compatibility with gravel and adventure bikes, cyclocross bikes and road bikes with tyres exceeding 32mm. Proudly Made in Germany, the Speedrocker offers incredible stability over the roughest tracks while also providing optimum protection in all weathers. - Rear fender expands for custom fit - Rubber fasteners mount to a variety of frame styles

The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support. - Compatible only with disc brakes - Includes hook-and-loop fasteners and tension rubber - Weight: 580g - Max. outer diameter: 35mm - Wheel size: 27.5" (650B), 28" - Tire width: 52mm - Length, front fender: 680mm - Length, rear fender: 870mm

Keep water and mud off you with SKS's X-Blade II Rear Fender! The high-performance dual-compound plastic is ready for wet weather action, while two moveable joints allow for perfect placement and optimum coverage.

Keep water and mud off you with SKS's X-Blade II Rear Fender! The high-performance dual-compound plastic is ready for action, while two moveable joints allow for perfect placement and optimum coverage.

Keep water and mud off you with SKS's X-Board down tube fender! This versatile fender works with most bikes regardless of wheel size thanks to its adjustable mounting straps.

No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

Handlebars are for your hands! Our machined aluminum Handlebar Stub allows you to carry most bar-mounted accessories directly on The Handlebar Bag. Each bag accepts two Handlebar Stubs via the M5 threads on each side of the bag. The Handlebar Stub allows you to carry most bar-mounted accessories directly on The Handlebar Bag. Each bag accepts two Handlebar Stubs. See install notes in the description below. Install notes: -Recommended torque: 6-8Nm, using a square-end, 3mm hex key. -Align wings on the Handlebar Stub with the slots on the Accessory Rails. *Not for use with out-front style mounts. Usage will void the warranty. Included: (1) Handlebar Stub (31.8mm diameter) (1) M5 x 0.8 x 30mm stainless steel, nylon patch FHCS, black finish Specifications Material: -machined, anodized aluminum -stainless steel, nylon patch hardware Weight: 19g / 0.6oz Dimensions: 30mm x 31.8mm diameter / 1.1in x 1.25in diameter

Whether you want to listen to some tunes or track your ride, we have a mount for your preferred technology. Description: Available in a variety of options, each one allows you to attach your preferred technology to the center of the lid on The Handlebar Bag or the Out Front Mount. -The Tech Mount from Bar Fly® is available in two versions - Garmin® or Wahoo® - with mounts for other brands available from Bar Fly Bike. **Hammerhead® Karoo2 users, select the Garmin® option and use the Garmin® quarter-turn wedge provided with your Karoo2. -Quad Lock® fits most current smartphones. Phone-specific cases sold separately at Quad Lock Case. Included: Bar Fly Tech Adaptor: (1) Bar Fly Garmin Tech Adaptor or (1) Bar Fly Wahoo Tech Adaptor Or Quad Lock: (1) Quad Lock Integrated Head Unit (1) RW Quad Lock Adaptor Chip (1) M5 x 0.8 x 20mm stainless steel, nylon patch FHCS

Finally! A bag that can be built to suit YOUR adventures. Featuring a customizable lid built to accept most cycling computers or smartphones and is designed for quick, one-handed access to storage - while on the go! An easy on/off lever and integrated shoulder strap allows you to take the bag with you - on or off the bike. Whats Included: (1) Handlebar Bag (1) RW to BarFly Plate (1) Bike Mount (fits 31.8mm diameter bars) alternate, color-matched shock cord for Lid Specifications: Materials: -Exterior fabric - 500d PU-coated Cordura -Interior fabric - 220d grid stop nylon -Polymer lid -mMachined, anodized aluminum hardware Dimensions: -145mm x 235mm x 153mm / 5.8in x 9.3in x 6in -Volume: 3.2L -Weight (bag + bike mount) - 684g -Max carry capacity: 4kg / 9lbs -Weight: Bag & Bike Mount - 684g / 1.50lbs

Don't let the weather get in the way of adventure. The RockShox branded ZEB short fender is designed to keep you dry and clean when the weather turns. It can be easily installed at three points and looks as if your fork and fender are one, leaving your friends wondering why they are still messing around with zip ties. - 3-bolt mounts make for easy installation - Designed to integrate seamlessly and look pro with RockShox branding - Compatible with all ZEB models

When a backpack is too bulky for that quick lap but your pockets just won't do the job, the Stash Quick Rip hip bag is the perfect solution. It's the perfect size for water, nutrition, and spares and it won't get in your way. - Construction: Ripstop nylon, 3D mesh backing, stretch belt - Waterproofing: Waterproof zippers - Adjustment: Single sided stretch belt adjustment - Pockets: 2 pockets + phone pocket - Hydration Capacity: Neoprene bottle holder - Reflective logo, lower carrying straps

Free Your Pockets Why carry your tools yourself? Strap them to your bike and forget about them until you actually need them. Enough room for a CO2 cartridge, a small selection of tools + tire levers, and a spare tube. - Stretch hook-and-loop strap adjustment - Ripstop nylon construction - Printed silicone grip - Tri-fold design - 3 inner pockets

- Fits tubes from Ø27 to 35mm - Fits 26" to 29" wheels - Mudguard section of 55mm - Front mudguard compatible with disc brakes or V-Brake, and suspension or rigid bikes - Expander range on front and rear for perfect fitting - Includes long and short clamp depending on the space needed to clip it to the frame - Adjustable L shape steel bracket for rear and front mudguard - For an extra secure mounting of the rear mudguard we also offer a Ø 3 mm stainless steel U-stay - Mounting kit included

PDW's Full Metal Road Fenders are designed to fit road bikes that are difficult to install full-coverage fenders on. They have special hardware to get around caliper brakes and under forks, even add-on mounts for bikes that lack eyelets to mount fender stays to. They provide full-wrap coverage, even shielding riders behind you from tire spray thanks to the sturdy rubber mudflaps. Plus, safety release tabs ensure your wheels keep turning, even if debris gets lodged between the fender and tire. - Anodized aluminum - 30mm wide - Fits bikes with 700 x 23mm tires and fender eyelets - 454 grams

Behold the Trail Evo. The sum total of our decades of experience designing automotive optics, all neatly wrapped up in the best bike light we have ever engineered. Featuring a panoramic, perfectly even beam pattern that we fine-tuned the heck out of to meet the demands of trail riding. With a smooth falloff all around you to aid peripheral vision (the beam should fall off, not the biker). With it we created a literal wall of light that illuminates your entire field of view. A quick-release fiberglass-reinforced nylon mount that we, ahem, “borrowed” from those clever camera guys to keep this bike light pointing in the right direction. Good for 150+ minutes of strong output and, should you need it, the ability to USB-C quick charge on-the-go. Proudly and capably made just down the trail in Chicago IL. What’s in the Box: Trail Evo Quick-Release Bar Mount (fits 31.8mm and 35mm bars) USB-C to USB-A Charge Cable 2.5mm Hex Wrench Instructions

Following the tried and tested tire-hugging design of our MTB Mudhuggers, the GravelHugger is designed to fit most fork + wheel + tire (up to 50mm wide) combos. To reduce single-use plastic waste, and make fitting and removing easier, the GravelHugger is supplied with nitrile O-rings (70mm sizes for flat blade type and 50mm for traditional round steel forks). Zip ties (sold separately) can be utilized if you'd prefer to fit and leave them on at all times. - Suitable for 700c (Max tire width 42mm) and 650b wheels (Max tire width 50mm), depending on wheel/tire/fork combination - Designed and made in the UK from 100% recycled polypropylene - Includes Helitape and nitrile O-rings - Length: 490mm - Width: 60mm - Weight: 75g

Following the tried and tested rear Mudhugger design, will fit most bike frame seat stays and is designed for tires up to 50mm wide. The Rear GravelHugger is designed to be attached to the bike with zip ties as these afford the most secure way to fitting. However, it can also be attached utilizing hook and loop straps (sold separately), making removing and refitting easier. - Suitable for 700c and 650b wheels, Max tire width 50mm (depending on wheel/tire combination) - Designed and made in the UK from 100% recycled polypropylene - Includes Helitape and zip-ties - Length: 560mm - Width: 55mm - Weight: 200g

Initially designed to overcome the problem of fitting mudguards to a bike with a dropper seatpost, the Rear Mudhugger works well on all bikes, providing they have disc brakes. Attaching it to the seat stays overcomes all of the problems normally associated with rear mudguards. They do not move out of line, get in the way when getting on or off the bike, do not foul rear suspension travel, and are robust enough to take the rough and tumble of modern trail riding demands. The LARGE Rear Mudhugger is an all-new design for modern full-suspension bikes that have a low seat-stay angle of 26 degrees down to 22 degrees. This is an extra-long Hugger that is designed to be trimmed down to fit your bike perfectly. (it will work well on bikes with 27-28 degree seat-stays, but will be too long and need the end trimmed shorter still) - 760mm long and approx 105mm wide at the widest part - Ideal for all 29" and 27.5+ full suspension bikes - Includes frame tape and 6 zip-ties - Weight: 280g

Don't let the tiny size fool you. Mirrycle's Incredibell Bellini is little, light and gets noticed! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. - Weight: Black & Silver 17g, Brass 28g - Dome Diameter: 28mm (1.1") - Fits handlebars with 21mm – 22.6mm (.83" – .89") outside diameters

Mirrycle's Incredibell Spring Bell offers a traditional Asian-style bell that integrates into the top cap of the headset to free up valuable handlebar space. The bell can be mounted any way you choose on the headset, and the dinger is adjustable as well. A flick of your finger and the Spring Bell rings loud and clear for all to hear. - Dome Diameter: 45mm (1.8") - Weight: Black and Silver: 26g (.9oz), Brass: 57g (2oz)

The LTD Mirrycle Mirror quickly attaches to Bontrager Isozone handlebars using the supplied wrench. It has a convex mirror for a wide field of view to help you clearly see approaching traffic. And the mirror easily adjusts to your optimum viewing angle.

The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle. - Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter

ME 2000, designed specifically for e-bike riders, is connected and powered directly by the output of the e-bike motor (Shimano, Bosch, Brose, Yamaha). Requires cable dependent on the motor system (sold separately). - Daytime Running Light - Ambient Light Sensor - MAX Lumen: 2000 - Waterproof: IPX 6 - Aluminum Alloy Case - Application: E-Bike; Road, Off-Road.

E-Cable For SHIMANO - Length: 75cm/30inch - Compatible with MJ-90XS, ME series

E-Cable For BOSCH - Length: 75cm/30inch - Compatible with MJ-90XS, ME series

SADDLE MOUNT for Magicshine Seemee 60, 100, 180, and 200. Including a saddle mount used with seat rails.

The MAGICSHINE Monteer 3500S offers up to 3500 lumens of max output as an MTB headlight. With smaller head and lightweight design, it is a good choice for various off-road ride, as a handlebar or helmet light. - Lumen: 3500 - Battery: 5,200mAh - Charging Time: 2.5-3 Hours - Waterproof: IPX 5 - Runtime: 1.5-75 Hours

Magicshine Monteer 5000S is designed to meet and exceed the expectations for the mass majority of mountain bike riders. Its lightweight design and extremely high output with perfect beam pattern make it ideal for hardcore mountain biking and off-road cycling. - Lumen: 5000 - Battery: 7,000 mAh - Charging Time: 2.5-4 Hours - Waterproof: IPX 5 - Runtime: 2-90 Hours

Lezyne's Femto Drive Pair are compact, bright, and beautifully made front and rear safety lights. The Femto Front is an ultra-compact safety light with integrated lens On/Off switch. Durable machined aluminum construction. Side Visibility lens extends beyond body to provide 180 degrees of visibility. Two replaceable CR2032 batteries power one bright LED. Up to 15 lumens with two output/flash options. Available in seven unique anodized colors. Versatile 2-in-1 Clip-On System straps to bars or clips to loops. The Femto Rear mirrors the design of the Femto Rear, but puts out up to 7 lumens of red light with two output/flash modes.

- Lightweight, semi-rigid, top-tube-mounted, large smart phone holder - Rivet system to bolt onto frames with removable straps - Molded EVA foam structure with woven nylon cover - Compact design with extra-wide clamshell opening - Mesh divider keeps additional items in place - Clear, touchscreen-compatible cover - Three Velcro strap design attaches securely to the top tube - Easy access nutrition bag - Size: 19cm x 10cm x 7cm - Capacity: 0.5L - Weight: 98g

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.

- Ideal fit for very short stems with steep upward stem angles - 1cm rise in the base will allow larger cycling computers like the Garmin 1030 to nest securely above the stem without interference

Superlight, machined aluminum, race mount for the ultimate Tour de France level performance. At 32 Grams the Race Mount is 33% lighter than the “standard” Garmin Mount. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Garmin 820, 520, 510, 500, 25, 20 - Fits Handlebars: 31.8MM - NOT GoPro Compatible - Anodized Color: Black, Red, Blue, Red/Blue - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded. * Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.

An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. The mount replaces a standard 5mm spacer and is locked securely in place by the top cap compression system. - Supported Computers – Wahoo ELEMNT, Wahoo Bolt, Wahoo MINI - Compatible – 1-1/8" Steerer tube Diameter, - Thickness: 5mm, Length 50mm (Center-to-Center) - Recommended for 0 Degree to Negative Degree Stem Angles - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Weight: 25g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

- CNC Machined Aluminum - Combo (Computer on top – light or camera underneath) - WAHOO approved replaceable computer insert protects computer tabs - Anodized Black with laser etched logos - Payload Capacity: Top - 123g / Bottom 242g on K-EDGE K13-580 Combo adapter - Weight: 60g - Mount Type: Clamp 31.8mm - Mount Weight: 60g Compatibly: - All WAHOO Cycling Computers – ROAM, BOLT, ELEMNT, MINI

With GoPro's Curved and Flat Adhesive Mounts, you can get creative with your mounting options for awesome camera shots on your next adventure! Waterproof and industrial strength, these mounts will stick to flat and curved surfaces, and when you're done it's easy to remove them using a hairdryer.

Capture your ride from new and exciting angles with GoPro's Vented Helmet Strap Mount. It's incredibly adjustable and fits most vented helmets so you can mount your GoPro camera for unique shots (camera sold separately).

The Gazelle commuter bag was designed for getting to work with peace of mind. Everything you need for a day at the office will be well protected in this waterproof bag, including your computer, with a special compartment developed specifically to cushion your laptop (up to 15 inches). The Gazelle commuter bag has a removable shoulder strap for comfortable carrying off the bike and attachment hooks to ensure the bag is tightly fastened to your bike's rear rack. Sleek Meets Practical From the bike lane to the boardroom, the Gazelle Commuter Bag gracefully toes the line between form and function. A protected laptop sleeve and stealthy shoulder strap transition the bag off the bike rack and into the office, while waterproof material and reflective elements offer protection while on the bike. Simple Mounting Solution With dual mounting hooks, the Gazelle Commuter Bag will fit on nearly any rack in the current Gazelle fleet. The only bikes we don't recommend for this accessory are those with rack-mounted batteries: the Medeo T9 and Medeo T9 City, due to a lack of clearance on the rack rails. - 20L capacity with a protective sleeve accomodating laptops up to 15 inches - Fitted with a removable shoulder strap for off-bike flexibility - Fabricated with waterproof material to protect contents - Incorporated reflective elements for enhanced visibility - Dimensions: 28 x 43 x 17cm

The Gazelle double pannier is ideal for errands and adventures large and small. With a carrying capacity of 37 liters, this accessory can handle bulkier loads and support longer trips on two wheels. With functional features such as a water-resistant material and hidden rain covers for each pannier, this practical powerhouse is smart and stylish. Specced with the MIK-mounting system, these bags lock securely to the rear rack, ensuring a safe ride for any and all cargo. Generous Capacity With 37 liters of storage space, the Gazelle Double Pannier smartly and stylishly transforms your ebike into a cargo bike. From the farmer's market to the office, this hardworking accessory enables you to get more done on two wheels. Trusted Mounting Technology Boasting the reliable MIK system, the Gazelle Double Pannier will fit securely on any MIK rack. In the current Gazelle fleet, all Medeo models are specced with MIK racks. Other model families, such as the Ultimate, are specced with a different rack, but can be made compatible with an MIK carrier plate adapter. - 37L capacity (18.5L per bag) - Easy mounting with the MIK-system - Fabricated with waterproof material to protect contents - Incorporated reflective elements for enhanced visibility

Introduce the rider you are today to the one you’ll be tomorrow. The Edge® 540 cycling computer offers targeted adaptive coaching when used with your compatible power meter and heart rate monitor. It helps you manage your efforts by providing power targets throughout a course plus stamina insights, so you know how much gas is left in the tank. Get superior positional accuracy under dense tree cover or the urban canyon, thanks to multi-band GNSS technology. It features button controls that work in any conditions. Whether you’re riding roads, trails, gravel or indoor, you can benefit from insights and workouts that will help you understand your strengths and weaknesses and prepare for upcoming races or personal milestones.

Garmin's vívoactive is a lightweight, touchscreen GPS smartwatch with built-in Garmin sports apps that you can wear every day to help you keep a healthy balance between work and life. It pairs with your smartphone, even when it isn't present, to gently vibrate and display alerts for incoming calls, texts, emails, calendar items, and notifications from social media and other mobile apps. The ultra-thin 8mm profile is comfortable to wear all day, and can easily transition from office to lunch ride, to the pool, golf course, or run. Plus, the high-resolution, color touchscreen stays readable in direct sunlight.

Ultra-Minimal Storage Solution To Keep Your Riding Essentials Organized If there's one thing that's true, there are never enough pockets. Fortunately, where you're going you won't need pockets, not with the Hip Pack Slim. This ultra-minimal storage solution is uber-low profile and fits easily under your jersey. With a divided main pocket that lets you keep your essentials organized, plus secure hip pockets for cash, keys, and valuables; meet your new favorite trail buddy. - Low-profile under-jersey fit - Divided main pocket for organization - Secure hip pockets for valuables - Reflective details for improved visibility

Keep the crud off your frame with the Fox Mud Guard. Designed to fit multiple fork and wheel sizes, the Mud Guard is an essential accessory for riding in wet environments. - Universal design fits most current forks

A full-size gear bag for those skipping the wheels. If your bag only goes from the garage to truck to track, then throw the Podium Gear Bag over your shoulder and hit the road. Same size as the Shuttle Roller, just without the wheels.

PUSH combines an innovative design with a unique easiness in weight, style, and handling. It is easily removed with one "PUSH" of a button on the base and just as easily re-attached by bringing the magnets together. In combination with the mechanical latching, both ensure a reliable and secure locking. With the small PUSH saddle bag 400, you only take the essentials you really need. Plus, the PUSH saddle bag 400 convinces with its clear and reduced design - understatement that fits under every saddle. With its 600 ml volume, the TWIST saddle bag 600 is the allrounder in the PUSH portfolio - it's as perfect for longer rides as it is for the everyday errand. Features: -For repair kit, spare tube, smartphones and co. -Quick release with PUSH button -Waterproof material and zip -Strap for a clip-on light -Reflective FIDLOCK logo print

Magnetic-mechanical saddle base holder for bike saddles. The PUSH saddle base is perfect for those who own two, or maybe even several bikes. With the PUSH saddle base, the right bag is always on the right bike. The base is easily attached to the seat rails with only one screw and it is compatible with all standard rails. Features: -Easy installation on saddle rails -Only one screw for the installation needed -Fits all PUSH saddle bags

The cageless TWIST toolbox provides space for all the tools and essentials needed for the tour: tire lever, tube, mini-tool, repair kit, pump, or CO2 cartridge. Thanks to the angular design, the smartphone or energy bar can be stowed in the bag. Features: -Includes the TWIST bike base -Perfect for tools such as tire levers, tubes, multi-tool, patch kit -Mesh pockets to organize and to hold all things in place -Angular design for extra space -No external wear thanks to the cageless TWIST technology -Waterproof material -Box volume: 550 mL -Maximum filling weight: 500 g

VACUUM-magnetic smartphone base for the ahead cap. The ahead cap mount consists of a special ahead cap which is screwed to the head tube. The base is then placed on the cap and is easily secured with a clamp using a knurled screw, or theft-proof with an Allen screw. The ahead cap base can thus be quickly removed when no smartphone is needed, while the plain cap remains screwed to the bike. Features: For installation on the ahead cap. Fits all 1 1/8" threadless headsets No interference with electronics Fits all VACUUM smartphone cases (Sold Separately) Includes: VACUUM ahead cap base Ahead cap including screw Clamp including knurled Allen screw

VACUUM-magnetic smartphone base for car vent panels. The VACUUM car vent base consists of a ball head and claws that are clamped into the car's ventilation panels. This connection is securely fixed with a locking ring. The smartphone is thus quickly and easily attached to the dashboard of the car and is the perfect navigator on the road. Features: For the installation to the car's ventilation panels. No interference with electronics Fits all VACUUM smartphone cases (Sold Separately)

VACUUM-magnetic smartphone base for handlebars. The VACUUM phone mount uses a unique combination of a suction cup element and magnets to securely attach phones to your bike, but also to the car's dashboard or the desk. The VACUUM base for handlebars is low in profile and easily attached to the handlebar with a clamp or cable ties. Features: -For installation on the handlebar. -Fits all bar tubes Ø 22-46 mm -No interference with electronics -Fits all VACUUM smartphone cases (Sold Separately) Includes: -VACUUM handlebar base -Two clamps for 22.2 mm and 31.8 mm bars including two 8 mm and two 10 mm screws -Cable tie mount including two cable ties

VACUUM-magnetic smartphone case. The case for the VACUUM smartphone mount. Thanks to the ingeniously simple combination of magnetic force and vacuum pressure, the smartphone can be operated with one hand and is 360° rotatable, while a ratchet prevents it from rotating during the riding – even on rough trails! Features: -The VACUUM phone mount uses a unique combination of a suction cup element and magnets to securely attach phones to your bike, but also to the car's dashboard or the desk. -The phone is easily positioned and connected to the mount through the magnetic guidance and the vacuum force keeps it securely locked. In case of a strong impact, the hold is additionally secured by the vacuum pressure created by the suction cup. -The centering of the smartphone is ensured by the magnetic force - thus the suction power is always guaranteed. The smartphone is released by simply pressing a lever on the side of the phone base. -Thanks to the ingeniously simple combination of magnetic force and vacuum pressure, the smartphone can be operated with one hand and is 360° rotatable, while a ratchet prevents it from rotating during the riding - even on rough trails! -The phone mounting system consists of a base (available for various applications) and a special, ultra-thin smartphone case with an embedded geometry. -The slim case protects the smartphone on and off the base. The understated elegance of the inconspicuous case with a shock proof TPU surrounding is accompanied by the decorative as well as practical ratchet and recessed geometry. Soft material on the inside of the case protects the phone's backside.

The Fox Mud Guard is a minimalist mudguard which was specially developed for the FOX 36/38 mm suspension forks from model year 2021. The stable attachment with the help of two screws (included in the scope of delivery) enables easy installation. As a result, it stays in place even in rough terrain. Despite its small size, it meets the high expectations and effectively protects your face from dirt and mud. But not only you are well protected, your material, such as headset or suspension fork, gets less and has a longer lifespan. Technical specifications: Material: Plastic Compatibility: only suitable for FOX 36/38 mm suspension forks from model year 2021 Dimensions (WxL): approx. 115 x 190 mm Fastening: using 2 screws Color: Black

This direct-mount fender uses a proprietary and sturdy 4-point attachment to secure to the fork. The NEW XL version offers 85% more coverage than the standard version for fitment on 36 and 38 FOX Forks. The FOX 36 and 38 Mud Guard (Standard and XL) fit the following forks: - FOX 36 Performance (2021 and newer) - FOX 36 Performance Elite (2021 and newer) - FOX 36 Factory (2021 and newer) - FOX 38 Performance (2021 and newer) - FOX 38 Performance Elite (2021 and newer) - FOX 38 Factory (2021 and newer) If you aren't sure if the Mud Guard will fit, check if your fork has bleeder valve mounts on the backside of each lower leg. If your fork does not have these mounts, then it is not compatible with the FOX Mud Guard product.

- Fits 22-25.4mm Handlebars

Let people know you're coming through. And do it in style. The perfect way to say 'Hello' Or 'hey there,' 'coming through' and 'sup'. We've made ringing an art form. Spice up your handlebars with our unique graphics and bold colors. Product details: - Easy-to-push lever creates a friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware