Indoor Cycling

The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes

The Wahoo KICKR SNAP makes indoor training a "snap!" It's a convenient, easy to set-up wheel-on smart trainer with the realistic ride experience Wahoo smart trainers are known for. The SNAP's legendary flywheel features technology that creates the same resistance experienced when riding outdoors. Plus, no other indoor bike trainer has more software training options, including Zwift and Trainer Road. The KICKR SNAP includes LED lights for connection status, third party power meter support, and the power measurement is now accurate up to +/-3%. - Designed for consistent power measurement of up to 1500W and accuracy of +/- 3% so that you can monitor and adjust your intensity. - Visual confirmation that KICKR SNAP is powered, connected and transmitting via Bluetooth Smart and/or ANT+ - Wahoo's KICKR CLIMB indoor grade simulator was designed in conjunction with the KICKR smart trainers to deliver an unmatched indoor training experience when combined. - KICKR HEADWIND was designed to deliver innovative climate control to your indoor training experience. - ANT+ and Bluetooth capabilities allow it to connect to both smartphones and GPS devices simultaneously or separately. An ANT+ FE-C connection allows the KICKR to be controlled from any FE-C enabled device or application. - SNAP's wheel-on design makes it easy to turn your road, mountain, or TT bike into a powerful indoor smart trainer. - Made from high strength carbon steel and featuring a wide stance, SNAP is designed to keep its feet firmly planted on the floor and your bike securely locked in so you can train with confidence. - When connected to your device, it automatically sets your resistance via your favorite app or software - The SNAP flywheel is innovative and proven technology emulates the power and inertia experienced during outdoor riding. It provides the most realistic ride feel especially when using virtual riding/training platforms like Zwift and Trainer Road. - Get vital cycling metrics on your indoor ride. - Low operating sound, so no shouting required! - Works with popular training apps such as Zwift, The Sufferfest, Fulgaz and TrainerRoad. - Compatible with a third party power meter.

Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.

Replacement roller belt for Tacs roller trainers.

Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.

This narrow towel was developed specifically for indoor bike training sessions and is used by many professional riders during their warm-up or indoor training sessions. - Highly absorbent - Measures 30cm x 115cm

Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only

The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.

The Tacx Sweat Cover protects your bike from corrosion caused by perspiration. It is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting.

The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.

A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.

The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.

The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.

- Includes Sweatcover for Smartphone (T2931) and Towel (T2940) - 891076

This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm

Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.

- Adapter for Tacx Direct Drive trainer - 01 is compatible with 142 x 12mm and 148 x 12mm - 02 is compatible with 135 x 10mm - 03 is compatible with 135 x 12mm (w/5 mm spacer included with every Tacx Direct Drive trainer), 142 x 12mm and 148 x 12mm - 04 The thru axle adapter kit is for bikes with a 12 mm thru axle. The axle adapter is required to couple the rear stay with the thru axle mount on a Tacx NEO or FLUX Smart trainer.

Is riding on the rollers a difficult or tense activity for you? Choose for extra safety with this bike support. You secure the front of your bike so that you can ride the distance you want without any worries. - The bike support is only suitable for the Tacx Galaxia and Antares. - Offers you greater safety

- Large and rollable trainer mat - Made from high quality, water-repellent 6mm thick foam - Protects your floor against scratches and sweat - Muffles noise and vibrations - 180 x 85 cm

- Replacement freehub body compatible with Neo 2T (T2875.60), Flux S (T2900S.60 A), Flux 2 (T2980.60 A) direct drive trainers - NOT compatible with older generation Neo (T2800), Neo 2 (T2850/T2850.60), Flux (T2900), Flux S (T2900S/T2900S.60) and Flux 2 (T2980/T2980.60)

- Replacement freehub body compatible with Neo 2T (T2875.60), Flux S (T2900S.60 A), Flux 2 (T2980.60 A) direct drive trainers - NOT compatible with older generation Neo (T2800), Neo 2 (T2850/T2850.60), Flux (T2900), Flux S (T2900S/T2900S.60) and Flux 2 (T2980/T2980.60)

This freehub body enables you to fit a Campagnolo cassette on the NEO Smart and the FLUX Smart. Suitable for 9 through 11 speed Campagnolo cassettes. How to place the Campagnolo Body: 1. Remove the cap with a 5-millimeter Allen key. 2. Replace the Shimano/SRAM body with the Campagnolo body. 3. Place the cap on the Campagnolo body and tighten with a 5-millimeter Allen key.

- Replacement freehub body compatible with Neo 2T (T2875.60), Flux S (T2900S.60 A), Flux 2 (T2980.60 A) direct drive trainers - NOT compatible with older generation Neo (T2800), Neo 2 (T2850/T2850.60), Flux (T2900), Flux S (T2900S/T2900S.60) and Flux 2 (T2980/T2980.60)

- Replacement freehub body compatible with Neo (T2800), Neo 2 (T2850/T2850.60), Flux (T2900), Flux S (T2900S/T2900S.60) and Flux 2 (T2980/T2980.60) - Not compatible with Neo 2T (T2875.60), Flux S (T2900S.60 A), Flux 2 (T2980.60 A), which requires 891051

- Replacement freehub body compatible with Neo (T2800), Neo 2 (T2850/T2850.60), Flux (T2900), Flux S (T2900S/T2900S.60) and Flux 2 (T2980/T2980.60) - Not compatible with Neo 2T (T2875.60), Flux S (T2900S.60 A), Flux 2 (T2980.60 A), which requires 891051

With the Tacx tablet stand you can place your tablet at a comfortable height and distance while using your bike trainer. Adjustable to different tablet sizes - length 182-267mm, width 112-197mm, max. thickness 13mm.

- Replacement freehub body compatible with Neo 2T (T2875.60), Flux S (T2900S.60 A), Flux 2 (T2980.60 A) direct drive trainers - NOT compatible with older generation Neo (T2800), Neo 2 (T2850/T2850.60), Flux (T2900), Flux S (T2900S/T2900S.60) and Flux 2 (T2980/T2980.60)

With the Antares roller you can cycle freely to refine your coordination and technique. This roller can be retracted to 80 cm. Conical Rollers The Tacx rollers are conical which ensure that your bike always remains in the middle of the roller while you are riding. This makes riding on the rollers easier and safer. Retractable The Tacx rollers are retractable to 80cm. FEATURES Type of trainer: Roller Roller diameter: 100-110mm (3.93-4.33in) Suitable bikes: All bikes with a wheel diameter of 26 to 29 in SPECIFICATIONS Max. footprint (lxw): 1350 x 470 mm (53 x 18.5 in) Height: 135 mm (5.31 in) Dimensions when folded: 800 × 470 × 135 mm (31.5 × 18.5 × 5.31 in) Weight: 7.7 kg (17.0 lbs) Trainer Type: Basic , Roller Article number: T1000

The Galaxia is an advanced roller. The patented swing system allows it to absorb the forward and backward accelerations perfectly, ensuring that you do not ride off the rollers. The Galaxia can be retracted to 80 cm. Patented Swing System The Galaxia relies on a swing system that ensures the rollers can swing forward and backward. When you start to sprint, switch pace fast, or stand on the pedals, this system absorbs the sudden forward or backward movement so you do not derail. Conical Rollers The Tacx rollers are conical which ensures that your bike always remains in the middle of the roller while you are riding. This makes riding on the rollers easier and safer. Retractable The Tacx rollers are retractable to 80cm FEATURES Type of trainer: Roller Roller diameter: 100-110mm (3.93-4.33in) Suitable bikes: All bikes with a wheel diameter of 26 to 29 in SPECIFICATIONS Max. footprint (lxw): 1350×500mm(53×19.7 in) Height: 135 mm (5.31 in) Dimensions when folded: 800 × 500 × 135 mm (31.5 × 19.7 × 5.31 in) Weight: 8.2 kg (18.1 lbs) Article number: T1100

Take your ride inside with Tacx Boost. You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it. Resistance can be controlled with a lever on the handlebar. The setup is easy—with just two simple clicks you mount your bike and you are ready to ride. SIMPLE SETUP With just two simple clicks, you'll be ready to ride. SMALL BUT STABLE This indoor trainer has a small footprint, 675 x 650 mm (26.6" x 25.6"), but provides a sturdy ride. EASY TO STORE Multifunctional front wheel support serves as a handle to carry the trainer and ensures a natural cycling position. MAGNETIC BRAKE You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it. RESISTANCE CONTROL A simple lever on your handlebar lets you control the resistance; 10 levels, up to 1,050 watts. REALISTIC RIDE FEEL An actual flywheel generates a realistic and smooth pedal stroke. SMOOTH AND QUIET The closed resistance unit reduces noise and makes for a smoother ride. HOW FAR AND HOW FAST Add a speed sensor (sold separately) to track how far and how fast you're riding and train with some of your favorite apps. FEATURES - Magnets: 2x8 Permanent ferrite magnets - Transmission: Roller, 30 mm - Electrical requirements: No voltage required - Power indicator: None - Connection indicator (ANT/BT): None - Firmware upgradable: No - Suitable bikes: Road, Tri, & MTB with skewer quick release - Supplied with: Front wheel support, quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS - Max. power (40 km/h): 1050 Watt - Simulation of descent: No - Max. torque: 17 Nm - Max. brake force: 50 N - Flywheel: Actual of 1.6 kg - Mass inertia: 9.18 kg (20.2 lbs) - Footprint (LxW): 675 x 650 mm (26.6 x 25.6 in) - Height 410 mm (16.1 in) - Dimensions when folded 565 x 410 x 245 mm (22.2 x 16.1 x 9.65 in) - Weight 8.53 kg (18.8 lbs)