Peaty's Holeshot CO2 Tire Inflator Kit

Why use CO2 inflators over hand pumps:
If the hole in your tire is so big that sealant can't seal it, your tire will lose all air pressure and, most of the time, the tire bead will pop off the bead seat on the rim, creating air gaps all the way around the tire bead. As anyone who has set up tubeless tires before will know, getting enough air into the tire to pop the tire bead back onto this bead seat isn't easy, even when you're in the comfort of your home workshop, never mind out on the trail with a group of impatient mates - or worse - mid race.

A lot of people carry mini hand pumps with them, and they're great for re-inflating small amounts on the trail after slight pressure loss, but you'd need forearms like popeye to re-seat your tire with one! Without doubt, the quickest and easiest way to get you back riding while out on the trail is with a CO2 inflator. Not only do they get you back up and riding again much quicker than a hand pump, they are much smaller and easy to carry with you on your ride.

Designed for durability:
Made from CNC'd 6061 aluminium, and with a patent-Pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the o-rings to the awesome chris king anodized colours.

Straight line is the fastest line:
Peaty's straight line, compact design enables faster airflow for rapid inflation, and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle.

From Flat to inflated in less than 10 seconds!

No gloves, no problem!
Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. Far from a cheap strip of neoprene, the freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves.

Features:
Unique, compact, straight-line design for maximum airflow
Simply push down to inflate - Release to stop
Unique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without gloves
Manufactured from 6061 aluminium

Application:
Remove valve cap and loosen the valve core. Check the valve is clear by pressing down the loose valve core. You should hear air flowing through the valve
Cover the CO2 cartridge with the closed-base freeze protector sleeve provided
Screw the CO2 cartridge fully into the inflator head. You may hear a small hiss when the cartridge is successfully pierced. If not, give the valve a quick press and you should hear gas 'tsssst' out

Press the head over the valve and push straight down firmly to discharge the cartridge and inflate the tire to your desired pressure. Releasing the inflator head will stop the flow
Once the tire is inflated, remove the inflator, re-tighten the valve core and re-apply the valve cap

Included:
2 x 25 g CO2 cartridges
1 x Inflator Head
1 x Closed Base Freeze Protector Sleeve