Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Cranksets

Blackspire Single Ring Chain Guide Roller Kit
$11.99
- Includes replacement lower roller, 608 2Rs cartridge bearings, axle, bolts, and washers to fit blackspire single-ring roller chain guides
Campagnolo Chorus 12-Speed Crankset
$542.00
The Campagnolo Chorus 12-Speed Crankset features lightweight carbon crank arms, and is optimized for Campagnolo's Ultra-Torque crank system. - Utilizes Campagnolo's Ultra-Torque crank system to provide a very lightweight and stiff system that transfers power to the pedals without power loss - Directly molded unidirectional carbon fiber cranks, steel axle, and aluminum chainrings provide exceptional stiffness and optimum power transmission - Symmetrical teeth on the internal chainring allow for fluid and precise transmission, even with extreme cross-chaining - Chainrings are surface-treated for longer life - Q-Factor: 145.5mm - Design is optimized to run multiple chainring combinations - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 96 - Pedal Spindle: 9/16" - Crank Intended Use: Road - Drivetrain Speeds: 12 - BB Included: No - Weight: 686
Campagnolo Record 12x2 Speed Crankset
$739.00
The new Record 12x2 Speed crankset: a new hole-free design for the right-hand crank that optimizes aerodynamics. The new carbon fiber Record 12x2 Speed crankset with unidirectional finishing guarantees continuity with the finishing of the entire groupset, whilst maintaining the Ultra-Torque bracket system on the steel axle to ensure perfect transmission of power. The new Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters without affecting the Q factor that remains constant at 145.5 millimeters. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) enable reducing the weight through greater use of carbon fiber. There are eight fixing screws for increased structural stiffness. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
Campagnolo H11 Crankset
$920.00
Designed specifically for use with H11 groupsets. Full Carbon crank arms and spider are hollow for maximum stiffness and minimal weight. Utilizes USB ceramic ball bearings. Light weight hard anodized alloy chainrings and alloy chainring bolts. Utilizes Campagnolo's Ultra-Torque crank system. - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - USB ceramic bearings increase smoothness and decrease rolling resistance, weight and the need for maintenance. USB bearings are 50% smoother than standard Campagnolo bearings - Ultra-Torque system have both drive and non-drive side bearings pre-installed - Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Required for use with H11 Ergopower shift levers, the crank spider is shifted outward to adjust for 135 and 142mm hub spacing while maintaining the Q-Factor - Requires use of Ultra-Torque bottom bracket cups
Campagnolo Super Record Carbon Crankset
$1,085.00 - $1,265.00
The road steepens, but instead of slowing down, you push harder on the pedals and fly up the hill as all of your power turns into speed thanks to your Campagnolo Super Record Ultra-Torque Crankset. It sports a unique, integrated titanium spindle design that joins the two sides of the crankset together via a toothed Hirth joint in the center. And for ultra-smooth pedaling, the crankset comes with ceramic bottom-bracket bearings that fit into outboard cups (sold separately). The aesthetically arresting design provides incredible stiffness, while Campagnolo's unified BCD (145/112mm) allows for all 3 chainring standards. Plus, the Super Record chainrings sport special pins and plating for fast, silent shifts and long life. - Chainrings included: Yes - Drivetrain speeds: 11 - Number of chainrings: Double - Spindle interface type: Campagnolo Ultra-Torque
Campagnolo Super Record 12x2 Speed Crankset
$1,323.00
The new Super Record 12x2 Speed crankset: an intense concentration of innovation that results in the greatest possible stiffness and precision in derailing, whilst providing a dedicated aerodynamic “super design." The new carbon fiber Super Record 12x2 Speed crankset has been made lighter on the inside through Campagnolo Hollow Technology, which uses the Ultra-Torque bracket system with a titanium axle to transfer all of the force the athlete applies to the pedal to the drivetrain. The new Super Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters, without affecting the Q factor, which remains constant at 145.5 millimeters thanks to the new hand crank design. The use of ceramic Cult bearings leads to obtaining the smooth ride that the Campagnolo brand is known for. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) combined with the eight fixing screws, optimize weight and stiffness through the increased use of carbon fiber. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
Cane Creek eeWings All-Road Crankset
$1,392.99
The Cane Creek eeWings All-Road titanium crankset offers superior stiffness, durability, and weight savings. This slimmer crank is specifically designed to take on road, gravel, and cyclocross configurations. - 20%-30% more stiff than premium carbon cranks, while remaining in the same weight range - Includes CNC machined aluminum bottom bracket preload adjustment ring - 30mm spindle is compatible with the following bottom brackets: BSA68mm, PF86, BB30 (External Bearing Only), PF30 (External Bearing Only), and 386EVO - 160mm Q-Factor - Backed with a 10-year limited warranty - eeWings Tie-Dye cranks are made from the same high-grade titanium as the standard eeWings cranks and are hand-finished in a blue to purple tie-dye color giving each crank a unique character - Changes and wear to the color are expected as the cranks are ridden and will not be covered by the warranty - An optional clear adhesive surface protector will be included in the box to help ensure that the finish lasts over the course of regular use Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 135/142 Road Disc Hubs > 415mm Chainstay, 135/142 Road Disc Hubs < 415mm Chainstay - Crank Intended Use: Road, Gravel, Cyclocross - Pedal Spindle: 9/16" - Spindle Interface Type: BB30/PF30 , 386 EVO , RaceFace/Easton CINCH - Chainring BCD: Direct Mount SRAM - Weight: 395 - BB Included: No
Cane Creek eeWings Mountain Crankset
$1,392.99
The eeWings Mountain titanium cranks were designed to keep up with the rigorous demands of the most aggressive trail and enduro mountain bikers—though they will benefit any rider who puts a premium on durability, stiffness, and weight. - Ultimate in stiffness and durability while only weighing a mere 400 grams—in the same weight range as premium carbon cranks, but 20% to 30% stiffer - CNC aluminum BB preload adjustment ring included - Fitment compatibility across multiple frame standards, bottom bracket sold separately - 176mm Q-Factor - 30mm spindle is compatible with the following bottom brackets: BSA73mm, PF92/89.5, BB30 (External Bearing Only), PF30 (External Bearing Only), and 392EVO - Backed with a 10-year limited warranty - Number of Chainrings: No Rings, No Spider Included - Chainline/Hub Compatibility: 135/142 MTB Hubs, 141/148 Boost Hubs, 157 Super Boost Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: 392 EVO , BB30/PF30 , RaceFace/Easton CINCH - Chainring BCD: Direct Mount SRAM - Weight: 400 - BB Included: No
Eclat Spire Cranks
$274.99
The Spire Crank features a proven 2 1/2 piece system combined with a super-tough, box-section arm design that will remain stiff and dent resistant. A strong and reliable crank built to shred. - RSD & LSD compatible - Smooth and rounded ankle-friendly spindle boss - Bore: 22 - Spindle Material: Steel - Weight: 31.8oz - Drive Side Compatibility: Right and Left Hand Drive - Crank Arm Material: Steel - Crankset Style: 2-Piece - BB Included: No
Eclat Onyx Cranks
$284.99
The Onyx cranks use an oversize super-hollow 24mm spindle, and a dependable 3-piece design with a super-strong invest cast spindle and pedal boss. These cranks are designed to take the strain, stress, and power of today’s most fierce riders. - Tubular heat-treated 4130 chromoly arms & axle - Strong, lightweight crank - RSD & LSD compatible - Investment cast pedal & spindle boss - Compatible with spline drive and bolt drive sprockets - Bore: 24 - Spindle Material: Steel - Drive Side Compatibility: Right and Left Hand Drive - Crank Arm Material: Steel - Crankset Style: 3-Piece - BB Style: Not Included - BB Included: No
Eclat Maverick Cranks
$289.99
The Maverick cranks offer strength and good looks in an ankle-friendly design. - Cold forged 7075-T6 alloy - One piece forged alloy crank arm for ultimate strength - RSD & LSD compatible - Heat treated chromoly inserts at pedal and spindle bosses - Compatible with spline and bolt drive sprockets - Hollowed design for reduced weight - Bore: 22 - Spindle Material: Steel - Weight: 34.6oz - Drive Side Compatibility: Right and Left Hand Drive - Crank Arm Material: Aluminum - Crankset Style: 3-Piece - BB Included: No
FSA BB30 Crank Bolts
$23.99
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles
FSA BB-386EVO/Press-Fit BB30 Bearing Assembly
$74.99
- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or stainless steel options
FSA Tempo Adventure Crankset
$115.99
True value and performance are found in the FSA Tempo Adventure crankset. The cranks are built to serve the recreational rider well and enhance riding enjoyment. - Crank arm and spider feature monocoque construction - Die-cast aluminum crank arms are lightweight and durable - AL7075 stamped and CNC-machined outer chainring - Heat-treated chromoly inner chainring - Chromoly chainring bolts - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs - Crank Length: 170mm - Crank Intended Use: Road, Gravel - Pedal Spindle: 9/16" - Rings: 46/30 - Spindle Interface Type: Square Taper JIS - Drivetrain Speeds: 11 - Chainring BCD: 110 - BB Included: No
FSA Tempo Adventure Crankset
$139.99
True value and performance are found in the Tempo Adventure crankset. The cranks are built to serve the recreational rider well and enhance their riding enjoyment. - Die-cast alloy crank arms - Monocoque crank arm/spider - AL7075-stamped and CNC-machined outer chainring - Heat-treated chromoly inner chainring - Chromoly chainring bolts - Available for 9-11 speed system
FSA Comet HD Modular Crankset
$147.99
The FSA Comet crank is a stiff, modular 1x crankset with a 24mm alloy spindle, offering high-value for the price. Solid forged 6061 aluminum arms put power and durability at the forefront, with channeling at the back to trim weight. A no-pinch bolt design on the left-hand crankarm makes fitting easier and looks cleaner. The modular configuration allows for compatibility with boost 148 frames. - Convertible spider design for different chainring and chainline configurations - Thick-thin tooth design for maximum chain engagement - Solid forged AL6061 crank arms - 24mm chromoly spindle - Direct mount steel chainring - Number of Chainrings: Single - Chainline/Hub Compatibility: 135/142 MTB Hubs, 141/148 Boost Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Rings: 32 - Spindle Interface Type: FSA MegaExo - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount FSA - BB Included: No
FSA SL-K Modular BB386EVO Crankset
$729.99
SL-K modular BB386EVO is the latest FSA crankset for gravel, adventure, or road use. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Hollow carbon fiber arms with UD finish - Forged AL7050 BB386EVO spindle - Direct mount outer chainring and 90 BCD inner chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems
LOOK Zed Chainring Bolts
$34.99
- Look, Zed, Chainring bolts
LOOK Zed Chainring Spacers
$34.99
- Look, Zed, Chainring spacers
LOOK Zed Chainring Nuts
$89.99
- Look, Zed, Chainring nuts
MRP 1x V3
$109.99
The 1x guide is the definitive cross-country chainguide. Used on the World Cup circuit and even in the 2012 London Olympics, the 1x has a proven track record of dependability and performance. The 1x is the perfect guide for riders and racers wanting a lightweight single-ring front drivetrain for cross-country use or riders wishing for more security out of their "narrow/wide" or XX1/X01 setups. Freshly updated for 2015 with the new co-molded "TR" upper guide - lighter and quieter, what's not to love? - Adds security to "narrow/wide" 1x10/11 and XX1/X01 drivetrains - Most models accommodate 26-38t chainrings - Tracked and grooved upper guide / backplate interface increases stiffness and eases installation - New co-molded "TR" upper guide with softer durometer interior for silent guidance - All install and adjustment operations possible with just a single 4mm HEX wrench. - BB mounted guides are only compatible with traditional, threaded BB systems
MRP AMG Alloy Chain Guide
$149.99
- All Mountain Guide that is the hybrid of the 1x and XCG guides - Features the integrated skid protection and the same upper guide as the G3 but offers no lower roller - Perfect for use with tensioned rear derailleurs and virtually silent and drag free w
Quarq Quarq DFour DUB Power Meter Chassis
$787.99
Reach new goals and explore new roads with a power meter that delivers on accuracy, durability, and reliability. The Quarq DFour DUB Power Meter is paired with the Quarq DUB Crankarms to pair with your Dura-Ace R9100 or Ultegra R8000 chainrings. A SRAM DUB Bottom Bracket will be required for installation. FEATURES - Bluetooth low energy technology and ANT+ wireless data transfer - MagicZero - automatically checks and recalibrates your power meter as you ride – no need to manually calibrate - AxCad -- no cadence magnet required - 10K Temperature CompensationBattery -- CR2032, 200-hour battery life, change without tools - OmniCal -- swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy -- within 1.5%, measuring both legs. SPECIFICATIONS - Speeds: 11 - Crank arm length: 170mm, 172.5mm, 175mm - BB Compatibility: All SRAM Road DUB BBs - Chainring Size: n/a - Bolt Circle Diameter (BCD): 110 BCD - Chainline: n/a - BB Spindle Interface: DUB - Chainring material: n/a - Guard: No Guard - Crank arm material: Carbon - Color (Crank arm): Natural carbon - Power Meter Type: Spider
Quarq Quarq DZero DUB Power Meter Crankset
$1,024.99
Reach new goals and explore new roads with a power meter that delivers on accuracy, durability, and reliability. The Quarq DZero DUB Power Meter is paired with the Quarq DUB Crankarms and SRAM’s X-Glide 52/36t chainrings to have the perfect fit for most 10- or 11- speed groupsets. A SRAM DUB Bottom Bracket will be required for installation. FEATURES - Bluetooth low energy technology and ANT+ wireless data transfer - MagicZero - automatically checks and recalibrates your power meter as you ride – no need to manually calibrate - AxCad -- no cadence magnet required - 10K Temperature Compensation - Battery -- CR2032, 200-hour battery life, change without tools - OmniCal -- swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy -- within 1.5%, measuring both legs. SPECIFICATIONS - Speeds: 11 - Crank arm length: 170mm, 172.5mm, 175mm - BB Compatibility: All SRAM Road DUB BBs - Chainring Size: 52/36T - Bolt Circle Diameter (BCD): 110 BCD - Chainline: n/a - BB Spindle Interface: DUB - Chainring material: Aluminum/Aluminum - Guard: No Guard - Crank arm material: Carbon - Color (Crank arm): Natural carbon - Power Meter Type: Spider
Quarq Riken AL Crankset
$1,249.99
Quarq's Riken AL power meter crankset uses the same power meter spider as RIKEN R, but with forged aluminum crank arms instead of carbon fiber. Power measurement takes place in the crankset spider — the heart of your bicycle. Its sole job: to convert the effort from both legs to forward motion. - 10K temperature compensation eliminates temperature effects on power measurement. - AxCad accelerometer cadence removes the need for a magnet. - The LED and visible ANT+ ID streamline installation and operation. - OmniCal means you can change chainrings without affecting accuracy. - Spindle interface: Truvativ GXP - Spindle diameter: 24-22 stepped
Race Face Alloy Crank Spindle Spacer
$4.99
- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
Race Face Cinch Nylon Preloader Crank Assembly
$4.99
Replacement CINCH Preload Ring for non-driveside Race Face CINCH cranks
Race Face CINCH Bolt with Washer 18mm XC/AM
$9.99
Race Face Cinch aluminum crank arm bolt. 18mm, fits XC/AM cranks.
Race Face CINCH Puller Cap with Washer 18mm XC/AM
$9.99
Race Face CINCH Crank Puller • Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine • Puller cap utilizes 16mm hex key • 26mm thread
Race Face Cinch Direct Mount Lockring
$9.99
- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks - RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost) - Mounts using a common Park BBT-22 tool
Page 1 of 5 Next page