Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Controls

SRAM Red eTAP Electric Road Kit
$2,346.99
Step up to the next generation in shifting with SRAM's wireless RED eTAP electric road drivetrain kit. Each kit contains: - SRAM RED eTAP shift/brake levers - SRAM RED eTAP wireless front and rear derailleurs - SRAM eTAP batteries - Battery charger - USB stick - Quick-start guide
3T Vola LTD
$999.99
Everyone's biometrics are different; no two cyclists should conform to the same TT set up. Comfort (we're talking about power-production) combined with aerodynamics, yields speed. You need the combined forces of both, and to do so you need to find your optimal position, which is why 3T designed their Vola LTD cockpit to be highly adjustable, not to mention light, stiff, and aero. - Narrow, aero-optimized base bars are built with 3T's HM carbon, cutting weight by huge margins - The super-low aero position favored by time trial specialists is possible with extension clamps mounted on the underside of the base bar - Arm pad stack height above the stem center line ranges from 30mm in the low position, to 97mm using all the included spacers in the top-mounted position - Width between the arm pads ranges 220—340mm, measured at pad outer edge - Arm pad reach can be set 20—70 mm ahead of the basebar center, measured at pad front edge - The arm pads rotate in their clamps -A reinforcing bridge is included for rigid, shake-free set-up, that can also double as a convenient computer clamp - Carbon aero extensions - Carbon base bars - Carbon 3T Comfort Cradles with neoprene pads - Weight: 750 grams in the "low position" - UCI legal
3T Revo Team Stealth
$849.99
The bullhorn bar was introduced to the cycling world by 3T on Francesco Moser’s hour record bikes. Its design principle hasn’t significantly changed since, until now. The Revo seems so obvious, now, providing a better, safer and more powerful grip for the rider. Then again, good ideas always seem obvious after the fact. Revo is the first-ever aerobar to attach the basebar wing to the front of the grips instead of the back, literally changing aerobar design 180°. The advantages are clear: - The rider’s hands cannot slide forwards off the grips, so it’s safer and easier to use at all times - It offers better grip and handling on tough descents, rough roads and sketchy turns - It improves aerodynamics — the basebar wing has a sharper angle of attack with the free air flow than standard basebars - Wing material: Unidirectional carbon - Extension material: Alloy - Cradle material: Alloy - Pad material: Neoprene - Base bar width (c-c): 400mm - Outside pad width: 240-340mm - Center pad width: 130-230mm - Pad stack: 30-97mm - Pad reach: 20-70mm - Grip inside reach: 72mm - Grip drop: 46mm - Clamp diameter: 31.8mm - Extensions: S-bend - Cradle: New comfort - Weight: 770g (minimum stack) - Finish: Stealth black or black with red accents
Bontrager Madone XXX Integrated Bar/Stem KVF Aero
$749.99
The Madone is built as a seamlessly integrated machine designed to do one thing: go fast. Trek's Madone Integrated Bar/Stem is an important part of that integration. Available in a variety or widths and reaches so you can dial in your superbike specifically for you. - Compatible with model year 2016/17 Madone - Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops - 100% OCLV carbon fiber construction - Seamless accessory integration with Blendr - Blendr accessory bases and mounts sold separately
Bontrager XXX Integrated Road Handlebar/Stem
$749.99
The Bontrager XXX Integrated Handlebar/Stem is a one-piece carbon bar/stem combo that brings clean looks and light weight to any road bike. Lightweight 100% OCLV Carbon construction offers a great road feel and control, while calibration marks and a flat front surface ensure easy lever installation. - Seamless accessory integration with Blendr - Flat surface front of bar for clean cable routing - Calibration marks allow precise, accurate and repeatable brake lever position - Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops - 100% OCLV Carbon construction - Internal relief channel eliminates need for additional spacer above stem - Safe for use with carbon and alloy steerer tubes
3T Vola Team Stealth
$724.99
Everybody loves to talk about the aerodynamics of aerobars and — guilty as charged — we also like all the work that went into finding the most aero shapes. But all of that is meaningless if the bars don’t put you in an aero and comfortable position (and in the end, comfort = aero as it allows you to stay in your aero position longer). To that effect, the Vola combines with a standard stem for the widest range of set-ups, has lots of stack, width and reach adjustment and the most comfortable elbow pads we have ever designed. - Wing material: Unidirectional carbon - Extension material: Alloy - Cradle material: Alloy - Pad material: Neoprene - Base bar width (c-c): 380mm - Outside pad width: 240-340mm - Center pad width: 130-230mm - Pad stack: 30-97mm - Pad reach: 20-70mm - Clamp diameter: 31.8mm - Extensions: S-bend - Cradle: New comfort - Weight: 810g (minimum stack) - Finish: Stealth black
SRAM RED eTap HRD Shift-Brake Control Direct Mount
$720.00
Without wires or cables, SRAM was able to design a simpler way to shift. Now, the intuitive simplicity of SRAM RED eTap is available with the added performance of hydraulic road disc brakes (HRD). The SRAM RED eTap HRD shift-brake control offers the world’s first wireless drivetrain with our most advanced HRD platform yet, HydroHC. Simpler shifting, better braking—all in the name of true advancement. - New HydroHC brake platform offers more control than any other road brake on the market - Compatible only with SRAM RED eTap derailleurs - SRAM Road 11-speed crankset, chain, and cassette compatible - Improved ergonomics including a smaller diameter hood for more finger wrap - Contact Point Adjustment lets you custom tune when your brakes engage—a first for HRD - An independent Reach Adjust makes it easy to adjust your brake lever position for maximum one-finger control - Bleeding Edge technology for quick, hassle-free bleeds - Class-leading heat management technologies—heat shield, insulated aluminum pistons, and a wider pad pocket—help HydroHC improve on HydroR’s already impressive heat management capabilities. - Responsive lever feel for better control, featuring a light lever stroke with distinct contact point and snappy return - SRAM eTap shift logic for intuitive and reliable shifting - Wireless connection via AIREA network for fast and clean installation - Brake lever material: Carbon - Shift lever material: Plastic - Color - Housing/hood: Black/Black - Color - Caliper: Falcon Grey - Pad type: Steel-backed organic - Hose length: Front: 950mm / Rear: 1800mm - Stealth-a-majig Connected
SRAM RED eTap HRD Shift-Brake Control Flat Mount
$720.00
Without wires or cables, we were able to design a simpler way to shift. Now, the intuitive simplicity of SRAM RED eTap is available with the added performance of hydraulic road disc brakes (HRD). The SRAM RED eTap HRD shift-brake control offers the world’s first wireless drivetrain with our most advanced HRD platform yet, HydroHC. Simpler shifting, better braking—all in the name of true advancement. - New HydroHC brake platform offers more control than any other road brake on the market - Compatible only with SRAM RED eTap derailleurs - SRAM Road 11-speed crankset, chain, and cassette compatible - Improved ergonomics including a smaller diameter hood for more finger wrap - Contact Point Adjustment lets you custom tune when your brakes engage—a first for HRD - An independent Reach Adjust makes it easy to adjust your brake lever position for maximum one-finger control - Bleeding Edge technology for quick, hassle-free bleeds - Class-leading heat management technologies—heat shield, insulated aluminum pistons, and a wider pad pocket—help HydroHC improve on HydroR’s already impressive heat management capabilities - Responsive lever feel for better control, featuring a light lever stroke with distinct contact point and snappy return - SRAM eTap shift logic for intuitive and reliable shifting - Wireless connection via AIREA network for fast and clean installation - Brake lever material: Carbon - Shift lever material: Plastic - Color - Housing/hood: Black/Black - Color - Caliper: Falcon Grey - Pad type: Steel-backed organic - Hose length: Front: 950mm / Rear: 1800mm - Stealth-a-majig Connected - Flat Mount rear frame-mounting bolts sold separately
3T Vola Team Stealth Essential
$624.99
Vola Team Stealth Essential is a lower-cost model of the award-winning Vola range. It's a complete starter package sharing the same architecture as Vola Team and based on the same 38cm-wide carbon fiber basebar. A super-low position favored by crono specialists is possible with extension clamps mounted on the underside of the basebar. Alternatively, extensions can be mounted above the basebar. Arm pad stack height above the stem centerline ranges from 30mm in the low position to 67mm in the top-mounted position. Width between the new comfort arm pads ranges 220–340mm, measured at pad outer edge. Arm pad reach can be set 20–70mm ahead of the basebar center, measured at pad front edge. Package includes alloy S-bend extensions, width extenders, and stiffness bridge. Riser kits, available as 3T spares, further raise stack height by up to 30mm. All-up weight of Vola Essential is just 700g. Finish with Team Stealth graphics.
SRAM RED HRD Shift Lever/Hydraulic Brake
$607.00
If you believe in better performance then you should believe in hydraulic road (HydroR) brakes. SRAM's award winning HydroR technology is the fulfillment of the promise of better braking, more control, and improved performance in all conditions. SRAM RED is delivering on the promise of braking confidence and security that brings speed control and stability to a new level. - RED ergonomics including Reach Adjust - SRAM Road 11-speed compatible - Optimized power and modulation for higher speeds and more control - Refined lever body design is more comfortable - Easy access bleed port means convenient service - Shift paddle design is lightweight and offers improved finger clearance - Moto-style means this is a right-side (rear) shifter with a front brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm
3T Superergo LTD Stealth
$589.99
Since its introduction, the most common feedback on our Ergonova dropbar was “don’t change a thing”. But observing how our customers ride, we noticed many spend considerable time holding the bars in the corner section, especially while climbing. Designing the corners specifically for this function has created a bar that is supremely comfortable not only on the tops and the drops, but also in this intermediate position. Further redesigns to the hood and drop shapes to accommodate the latest shift/brake levers help to create the new standard in ergonomics - Material: Unidirectional carbon - ultralight layup - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Superleggera LTD Stealth
$589.99
Superleggera, the lightest 3T drop bar ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 166g - Material: Unidirectional carbon - ultralight layup - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
SRAM RED 22 HydroR Shift Levers and Disc Brakes
$579.99
SRAM's RED 22 HydroR Shift Levers deliver pro-level shifting, unmatched ergonomics, and the power and modulation of hydraulic disc braking. You’ll instantly notice that the hydraulic disc brakes require less hand force than a traditional cable-pull brake and provides incredible power and modulation, making every road and 'cross ride better. As soon as you wrap your hands around the hoods, you’ll fall in love with the great texture that increases grip while offering additional cushioning. There's ample room for your fingers thanks to the small diameter body and loads of space behind the brake lever. You'll feel the ergonomics and response of SRAM’s DoubleTap shifting as you drop a gear for that grueling climb or ratchet through the 11 speeds in that frantic sprint finish.
SRAM RED DoubleTap Control Levers
$569.99
SRAM's RED shifters maximize the rider/bike interface. SRAM delivers on those bold words with every detail analyzed and refined: the transition from the hoods to the handlebar is smooth and seamless, the hood texture increases grip while offering additional cushioning, there's ample room for your fingers thanks to an overall smaller diameter and increased space behind the brake lever, and the larger, repositioned brake and shift levers give you unmatched control. And if that wasn't enough to make your hands feel right-at-home, independent reach adjustments for the shift and brake levers, and your choice of cable routing, will have you racking up record mileage. In addition to the high-end ergonomics and comfort, SRAM's renowned DoubleTap technology fires off up- and down-shifts from a single lever, reduces weight and leaves your brake-lever unfettered by shifting. Plus, the ZeroLoss cable pull yields immediate shifts for lightning-fast response. And the new no-trim front shifting works flawless with SRAM's revolutionary Yaw motion front derailleur.
SRAM RED 22 Hydro Shift Levers (Rim Brake)
$557.99
SRAM's RED 22 Hydro Shift Levers deliver pro-level shifting performance, unmatched ergonomics, and the power and modulation of hydraulic braking. You’ll instantly notice that the hydraulic rim brake requires lower hand force than a traditional cable pull road brake, and provides optimized power and modulation that enhances every ride. The hydraulic rim brake caliper has a tool-free contact point adjustment, a quick release for easy wheel changes, and a huge 27.4mm rim width compatibility. As soon as you wrap your hands around the hoods, you’ll fall in love with the great texture that increases grip while offering additional cushioning. There's ample room for your fingers thanks to the small diameter body and loads of space behind the brake lever. You'll feel the power and response of SRAM’s DoubleTap shifting as you drop a gear for that grueling climb or ratchet through the 11 speeds in that frantic sprint finish.
ENVE SES Aero Road Handlebar
$509.99
Developed in the wind tunnel and optimized for the road, the Smart ENVE System Aero Road Bar is built to deliver industry leading drag reduction, comfort, and handling precision. The SES Aero Road Bar's minimal frontal area and multiple hand positions are perfect for the rider looking to optimize their aero efficiency and position on the bike. Ride feel and handling are tuned to meet the high performance demands of road and ITU triathlon racing.
Bontrager Race X Lite Carbon Aero Bullhorn
$500.00
Bontrager's Race X Lite Carbon Aero Bullhorn is light, strong, ergonomic and a great upgrade for your wind-cheating machine. Its hand-made OCLV carbon construction damps vibrations to quash road buzz and trims grams to give you the lightest aero setup possible. This UCI-legal base bar is compatible with Bontrager clip-ons and aero brake levers, and it uses internal cable routing for a slippery, low-drag profile. And, it boasts a 31.8mm clamp diameter for stiffness that kicks in every time you accelerate.
3T Sphinx LTD
$499.99
3T designed their endurance track racing handlebar, the Sphinx LTD, for off-the-front efforts. Shaping and aerodynamics are the themes here, with reinforced high-modulus carbon fiber used throughout to achieve awesome responsiveness and superior aerodynamics. The tops are aerodynamically shaped for a speed advantage on the boards. Your hands will love the specially shaped "wingtips" that give you an ergonomically efficient area to hold on to when you're taking a lap on the competition.
Shimano Dura-Ace 9120 11-Speed Dual Control Levers w/Hydraulic Brakes
$499.99
- Quick And Intuitive Rear Shifting Operation - Shorter Lever Stroke - Redesigned Internal Shifting Unit - Lighter Front Shifting Operation - Redesign Front System With New Front Derailleur - Comfortable Grip And Operation - More Customizable And Precise Lever Position - Expanded Reach Adjustment Range (14 Mm) Mechanical Brake - Consistent Braking Performance In Any Condition - Easy Brake Control Hydraulic Brake
SRAM Force 22 ErgoDynamic Shifters
$247.00 - $493.00
Comfort plays a big part in speed—that's why SRAM designed the Force 22 ErgoDynamic Shifters with an ErgoFit textured body and refined hood shape that improve grip and provide a smooth transition to the bar. These 2x11-speed shifters are crafted with carbon and magnesium for an incredibly low weight you'll notice as soon as you wrap your hands around them. Individual reach adjustment of the ErgoBlade brake and shift levers put the controls exactly where you want them. And, with an understated black finish, the Force 22 Shifters are a great match for any machine.
3T Scatto LTD
$479.99
Scatto Ltd is a pure track sprinter's bar for elite-level track competition. It offers superb control and handling even in the most hectic races. Australian champion Anna Meares has won many races on this bar, including the Olympic sprint gold medal at London 2012. Wind tunnel tests show that the aerodynamic design produces far less drag than any standard round-section bar. This is achieved at no compromise to strength: Scatto is 50% stiffer than the reference bar formerly used by many of today's medal-winning track sprinters, as well as lighter. Its unique, radical design also imparts a stunning visual signature. Scatto Ltd has a 35cm width with a 128mm drop.
3T Superergo Team Stealth
$479.99
Since its introduction, the most common feedback on our Ergonova drop bar was “don’t change a thing”. But observing how our customers ride, we noticed many spend considerable time holding the bars in the corner section, especially while climbing. Designing the corners specifically for this function has created a bar that is supremely comfortable not only on the tops and the drops, but also in this intermediate position. Further redesigns to the hood and drop shapes to accommodate the latest shift/brake levers help to create the new standard in ergonomics - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Superleggera Team Stealth
$479.99
Superleggera, the lightest 3T drop bar ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 186g - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Aeronova Team
$464.99 - $474.99
The Renaissance Man of handlebars, 3T's full carbon Aeronova Team does it all. The mega-wide top section is just barely UCI legal, taking full advantage of the 3:1 rule for maximum aero advantage. The elongated, wing tubing also makes for an ergonomic grip when the road tilts up. Feathery light and stiff, the Aeronova is master of the mountains as well as the finish line chute. Internal cable routing keeps the tape-free tops aero and looking fresh, and 127mm drops for a short and shallow reach provide a confidence boost during sprints and descents.
SRAM Force 22 Hydraulic Disc Brake & Brake Lever (Right)
$469.99
SRAM's Force 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and offer precision braking and shifting performance. A carbon brake lever with an aluminum shift lever delivers precise modulation and shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. SRAM Force 22 is designed to work with 11-speed cassettes. The forged aluminum disc caliper itself is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races or epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Force 22 Hydraulics, you'll never go back to rim brakes again!
SRAM Force 22 Hydraulic Disc Brake & Brake Lever (Left)
$461.00
SRAM's Force 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and represents SRAM's attempt at perfecting braking performance. A carbon brake lever with an aluminum shift lever delivers precise modulation and shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The forged aluminum disc caliper itself is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races or epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Force 22 Hydraulics, you'll never go back to rim brakes again!
SRAM Force eTap AXS Shift-Brake Lever
$455.00
Combining the tradition of mechanical rim brakes and the precision and efficiency of modern electronic shifting, SRAM Force eTap AXS shift-brake levers are fully wireless and fully personalizable. Classic is now new. - AXS enabled for easy personalization - Simple and intuitive eTap shift logic - Customizable fit with Reach Adjust - One port per side for Blips - Large SRAM eTap shift paddles provide positive controls for rider input - For use with mechanical rim brakes
Bontrager XXX VR-C Handlebar
$449.99
Unparalleled ride quality XXX is a testament to the power of judicious carbon composite engineering. Not only is it incredibly light and stiff, but its OCLV Carbon construction also offers an unparalleled ride quality. The Unique Variable Radius Compact bend creates the ideal hand position for quick transitions from the tops to the drops. Key features - OCLV Carbon fiber construction - Variable Radius Compact (VR-C) design allows shorter reach and drop - Laser-etched brake lever position lines for spot-on control setup
Bontrager XXX VR-CF Aero Handlebar
$449.99
- OCLV Carbon fiber construction - Variable Radius Compact Flare (VR-CF) increases wrist clearance for ergonomic positions - Compatible with clip-on aero bars - KVF profile top section saves 23 seconds per hour compared to traditional bars - Internal cable routing for Di2 and standard housing - Laser-etched brake lever position lines for spot-on control setup - UCI compliant - Drop: 123mm - Reach: 93mm - Weight: 220 grams (38cm), 225 grams (40cm), 230 grams (42cm), 235 grams (44cm)
Cane Creek Direct Mount eeBrake
$449.99
The eeBrake G4 is the fourth generation of the legendary eeBrake featuring 100% CNC machined parts, a wider design optimized for 22 – 28mm rims, stiffer black arch spring, a revised one-piece center adjuster with built in resistance for easier use and ghosted laser etching that will stand the test of time – all with the same extraordinary stopping power and light weight that you’ve come to rely on from eeBrakes. REMARKABLY POWERFUL, POWERFULLY LIGHT The eeBrake is the ultimate brake from start to finish – a uniquely robust patented design developed and refined by relentless engineering, both at the computer and through real-life testing. At half the weight than that of its competitors, eeBrakes continue to set new standards by which all other high performance road brakes are judged. The same supreme upgrade for performance-oriented riders, a dramatically higher overall stiffness provides better modulation and more power. No detail has been overlooked, greater tire clearance and tool-less pad centering make installation simple. PERFECT CABLE ALIGNMENT The all-new titanium eeBrake cable adjuster pivots as the brake is applied, optimizing cable alignment during brake actuation. Also, the cable housing extends to lower tip of the cable adjustment screw eliminating added friction. That means, as the brake lever is squeezed, you get even and friction-free braking power. AERODYNAMIC Cross Cable Path aligns the brake cable over the center of the brake. This alignment provides a graceful, clean line and moves cables into the “wind shadow” of the frame, providing an aerodynamic advantage over traditional brakes with their cables and lever arms off to one side of the caliper. EASY PRECISION The tool-less adjustability provides super precision and pad motion consistency through the patented “Link” pad travel proportioning system. No annoying pad rub and constant need to re-center. No more re-adjusting the main fixing bolt after initial installation or using spring tensioning screws to align the brake pads. QUICK & SIMPLE One simple flip of the lever on the Quick Strut release opens wide enough to easily clear a 31mm tire allowing easy wheel removal. Change pads with ease using our patented system via Shimano style pads allowing for easy pad installation and removal without the use of tools. MATERIALS - CNC High Grade Aluminum, Titanium, and Stainless Steel RIM WIDTH COMPATIBILITY - 19mm to 28mm ADJUSTMENTS - Tool-free caliper centering adjustment - Wheel removal - quick release - Titanium Barrel adjuster w/ retention O-ring - T-25 Trox pad holder / cable clamp LEVERAGE COMPATIBILITY - Optimized to work with Shimano, Campagnolo, and SRAM levers LOGO BADGES - Two stage anodized engraved aluminum ee badge WEIGHT DIRECT MOUNT - 78.4 grams* (Front) - 78.2 grams* (Rear) *Pads not included WARRANTY - 3 Years
Page 1 of 21 Next page