Parts

3T started life as a master drop bar manufacturer. Nobody else had the same technical ability to manipulate tubing, and thus 3T became the first company to focus on more ergonomic (i.e. more complex) shapes. That focus continues to this day, now with the complete shape freedom of carbon. The previous generation, the Ergonova, was lauded worldwide as the top ergonomic bar, in fact, it was so good we didn’t touch the center section at all when designing the new SuperErgo. We did change everything else though, ensuring the SuperErgo will continue 3T’s streak as the ergo bar of choice for road cyclists from beginners to Team BMC and Team Aqua Blue. - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A

Superleggera, the lightest 3T drop bar, ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 186g - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A

Since its introduction, the most common feedback on our Ergonova drop bar was “don’t change a thing”. But observing how our customers ride, we noticed many spend considerable time holding the bars in the corner section, especially while climbing. Designing the corners specifically for this function has created a bar that is supremely comfortable not only on the tops and the drops, but also in this intermediate position. Further redesigns to the hood and drop shapes to accommodate the latest shift/brake levers help to create the new standard in ergonomics - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A

Superleggera, the lightest 3T drop bar ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 186g - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A

3T designed their endurance track racing handlebar, the Sphinx LTD, for off-the-front efforts. Shaping and aerodynamics are the themes here, with reinforced high-modulus carbon fiber used throughout to achieve awesome responsiveness and superior aerodynamics. The tops are aerodynamically shaped for a speed advantage on the boards. Your hands will love the specially shaped "wingtips" that give you an ergonomically efficient area to hold on to when you're taking a lap on the competition.

Since its introduction, the most common feedback on our Ergonova dropbar was “don’t change a thing”. But observing how our customers ride, we noticed many spend considerable time holding the bars in the corner section, especially while climbing. Designing the corners specifically for this function has created a bar that is supremely comfortable not only on the tops and the drops, but also in this intermediate position. Further redesigns to the hood and drop shapes to accommodate the latest shift/brake levers help to create the new standard in ergonomics - Material: Unidirectional carbon - ultralight layup - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A

Superleggera, the lightest 3T drop bar ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 166g - Material: Unidirectional carbon - ultralight layup - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A

3T's Luteus Team is an all-carbon cyclocross fork designed for use with disc brakes. It features include a tapered steerer and aluminum-faced fork ends for precise handling and simple wheel changes. It supports brake calipers for use with standard 160mm brake rotors. The left fork blade is reinforced at the brake mounting pillars to compensate for the stresses imparted by disc braking. On its outer face, there is a recessed channel with two integrated fixing points for tidy brake cable/hose management. Plus, the fork ends face forwards and have aluminum inserts to better resist the lateral stresses transmitted through the hub by rough terrain.

Vola Team Stealth Essential is a lower-cost model of the award-winning Vola range. It's a complete starter package sharing the same architecture as Vola Team and based on the same 38cm-wide carbon fiber basebar. A super-low position favored by crono specialists is possible with extension clamps mounted on the underside of the basebar. Alternatively, extensions can be mounted above the basebar. Arm pad stack height above the stem centerline ranges from 30mm in the low position to 67mm in the top-mounted position. Width between the new comfort arm pads ranges 220–340mm, measured at pad outer edge. Arm pad reach can be set 20–70mm ahead of the basebar center, measured at pad front edge. Package includes alloy S-bend extensions, width extenders, and stiffness bridge. Riser kits, available as 3T spares, further raise stack height by up to 30mm. All-up weight of Vola Essential is just 700g. Finish with Team Stealth graphics.

The bullhorn bar was introduced to the cycling world by 3T on Francesco Moser’s hour record bikes. Its design principle hasn’t significantly changed since, until now. The Revo seems so obvious, now, providing a better, safer and more powerful grip for the rider. Then again, good ideas always seem obvious after the fact. Revo is the first-ever aerobar to attach the basebar wing to the front of the grips instead of the back, literally changing aerobar design 180°. The advantages are clear: - The rider’s hands cannot slide forwards off the grips, so it’s safer and easier to use at all times - It offers better grip and handling on tough descents, rough roads and sketchy turns - It improves aerodynamics — the basebar wing has a sharper angle of attack with the free air flow than standard basebars - Wing material: Unidirectional carbon - Extension material: Alloy - Cradle material: Alloy - Pad material: Neoprene - Base bar width (c-c): 400mm - Outside pad width: 240-340mm - Center pad width: 130-230mm - Pad stack: 30-97mm - Pad reach: 20-70mm - Grip inside reach: 72mm - Grip drop: 46mm - Clamp diameter: 31.8mm - Extensions: S-bend - Cradle: New comfort - Weight: 770g (minimum stack) - Finish: Stealth black or black with red accents

The bullhorn bar was introduced to the cycling world by 3T on Francesco Moser’s hour record bikes. Its design principle hasn’t significantly changed since, until now. The Revo seems so obvious, now, providing a better, safer and more powerful grip for the rider. Then again, good ideas always seem obvious after the fact. Revo is the first-ever aerobar to attach the basebar wing to the front of the grips instead of the back, literally changing aerobar design 180°. The advantages are clear: - The rider’s hands cannot slide forwards off the grips, so it’s safer and easier to use at all times - It offers better grip and handling on tough descents, rough roads and sketchy turns - It improves aerodynamics — the basebar wing has a sharper angle of attack with the free air flow than standard basebars - Wing material: Unidirectional carbon - Extension material: Alloy - Cradle material: Alloy - Pad material: Neoprene - Base bar width (c-c): 400mm - Outside pad width: 240-340mm - Center pad width: 130-230mm - Pad stack: 30-97mm - Pad reach: 20-70mm - Grip inside reach: 72mm - Grip drop: 46mm - Clamp diameter: 31.8mm - Extensions: S-bend - Cradle: New comfort - Weight: 770g (minimum stack) - Finish: Stealth black or black with red accents

Everyone's biometrics are different; no two cyclists should conform to the same TT set up. Comfort (we're talking about power-production) combined with aerodynamics, yields speed. You need the combined forces of both, and to do so you need to find your optimal position, which is why 3T designed their Vola LTD cockpit to be highly adjustable, not to mention light, stiff, and aero. - Narrow, aero-optimized base bars are built with 3T's HM carbon, cutting weight by huge margins - The super-low aero position favored by time trial specialists is possible with extension clamps mounted on the underside of the base bar - Arm pad stack height above the stem center line ranges from 30mm in the low position, to 97mm using all the included spacers in the top-mounted position - Width between the arm pads ranges 220—340mm, measured at pad outer edge - Arm pad reach can be set 20—70 mm ahead of the basebar center, measured at pad front edge - The arm pads rotate in their clamps -A reinforcing bridge is included for rigid, shake-free set-up, that can also double as a convenient computer clamp - Carbon aero extensions - Carbon base bars - Carbon 3T Comfort Cradles with neoprene pads - Weight: 750 grams in the "low position" - UCI legal

The Discus Plus C30 Team is 3T's carbon wheelset from the Discus Plus range of 27.5-inch wheels: Center Lock disc-brake hubs, 34mm wide, tubeless-ready rims, and 24F/24R spoking make this wheel ideal for new-wave adventure bikes. The Team wheels exploit carbon's lightweight properties to go to 28mm inner width. The Discus Plus build is similar to Discus, utilizing the 3T linear+ system with asymmetric rim drilling to reduce the difference in spoke tension between the drive side and non-drive side. Hubs have light, alloy oversize spindles with modular end-caps that can be easily swapped from quick-release to thru-axle as needed.

The Discus Plus C30 Team is 3T's carbon wheelset from the Discus Plus range of 27.5-inch wheels: Center Lock disc-brake hubs, 34mm wide, tubeless-ready rims, and 24F/24R spoking make this wheel ideal for new-wave adventure bikes. The Team wheels exploit carbon's lightweight properties to go to 28mm inner width. The Discus Plus build is similar to Discus, utilizing the 3T linear+ system with asymmetric rim drilling to reduce the difference in spoke tension between the drive side and non-drive side. Hubs have light, alloy oversize spindles with modular end-caps that can be easily swapped from quick-release to thru-axle as needed; rear width can run 135mm or 142mm.

A tough, tubeless-compatible 27.5-inch disc wheel built around Center Lock hubs but shipped with handy 6-Bolt adaptors for dual compatibility straight out of the box. - Pinned construction, tubeless-ready, asymmetric/offset double-wall rim with 24mm internal width is suited to a wide range of tire widths perfect for either MTB or urban use - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech 135mm OLD alloy QR Center Lock hub w/serviceable cup and cone bearings - Shimano freehub: 8/9/10/11sp MTB compatibility - Reinforced head straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 1161g

A tough, tubeless-compatible 29/700c disc wheel built around Center Lock hubs and shipped with handy 6-Bolt adapters for dual compatibility straight out of the box. - Pinned construction, tubeless-ready, asymmetric/offset double-wall rim with 24mm internal width is suited to a wide range of tire widths perfect for either MTB or urban use - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech 135mm OLD alloy QR Center Lock hub w/serviceable cup and cone bearings - Shimano freehub: 8/9/10/11sp MTB compatibility - Reinforced head plain gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 1209g

Thread-on valve cap with core tightener. - Metal

Fits all standard Schrader valves.

Threaded bolt-on caliper style pads - 40mm pad length

Smooth post cantilever pads - 55mm pad length

Smooth post cantilever pads - 70mm pad length

- Molded road brake pads - 50mm pad length

Threaded post with hardware - 55mm pad length

Threaded post with hardware - 70mm pad

Mounts at dropout to prevent derailleur damage. - Cut-outs allow smooth cable routing - Durable steel construction

Soft & comfortable foam rubber - Contoured to fit the hand comfortably

Ultra-strong 1 piece construction. - Cut-out allows smooth cable routing for direct route derailleurs - Compatible with nutted and quick-release axles - Available in a variety of sizes to suit many types of bikes

Our standard butyl innertube with a 0.9mm wall thickness represents excellent value-for-money and strikes a nice balance between weight and durability. - S/V Schrader Valve (American Valve) with a 40mm valve length for trouble-free double wall rim compatibility - 12 and 14 tubes use angled/shorter valves for improved pump head clearance/accessibility - Easily identifiable from the GREEN color-coded box - Automated hot-feed extrusion with hydraulic press-cured vulcanization for consistent, high-quality, reliable construction - All tubes are inflated and stored for 24hrs to check for leaks/defects prior to being packaged - Low-lead nickel-plated valve with standard removable Schrader valve core - Packaged individually (carton/box)

Our standard butyl innertube with a 0.9mm wall thickness represents excellent value-for-money and strikes a nice balance between weight and durability. - P/V Presta valve (French valve) with 48/60/80mm length options for a wide range of rim depth compatibility - Easily identifiable from the RED color-coded box - Automated hot-feed extrusion with hydraulic press-cured vulcanization for consistent, high-quality, reliable construction - All tubes are inflated and stored for 24hrs to check for leaks/defects prior to being packaged - Low-lead nickel-plated valve with a threaded valve and non-removable core - Packaged individually (carton/box)

Fits Shimano / SRAM cartridge pad style carrier - All season compound - Length: 55mm - Black