Drivetrain

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action. - 2pcs IGUS self lubricating bushing - 2pcs O-ring - 2pcs stainless shim washer

Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness. - 28pcs rear load pins - 16pcs front load pins - Tool included

Protection where it's needed; Tube Tops can be placed virtually anywhere cable housing comes into contact with a bicycle frame. Designed to protect a frames finish Tube Tops can also be used to quiet cable slap.

SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other, and making rattling noises, and they provide a tidy custom look, too.

Lightweight one-piece Polypropylene thermoplastic pedals with in-molded grip nodes. - Proportionally smaller platform size is perfect for smaller-sized feet - Durable 7mm boron steel axle - Loose ball bearing axle assembly - Built-in reflectors included - 9/16" / 1/2" axle options - 300g per pair - Dimensions: 93 x 87mm

Lightweight, strong 1-piece Polypropylene thermoplastic body - Tough 7mm boron steel axle - Engineered Polymer Bearing replaces traditional loose ball bearings for a simpler, lighter construction and smoother spinning pedal - Fineline reflectors included (removable) - 9/16" axle - Dimensions: 110.5 x 100.5mm - Black - 301g per pair

Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Internal gear hub system compatible - Links (links): 112 - Color: Silver - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Half Link Chain: No

Crank boots designed for RaceFace Next R cranksets.

Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 2.5mm thick - 5 spacers per bag - Machined engineering-grade Delrin

Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 5mm thick - 5 spacers per bag - Machined engineering-grade Delrin

Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.

- Some do it to protect that beautiful finish on their cranks, and some do it because they can't stand stock crankarm graphics. - Whatever your reason for wrapping and protecting a crankset, we wanted to give you an option with our branding. - These are full-wrap Crankskins that work with most cranksets One pair

SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

Stainless steel cables are extruded to provide a smooth, low-friction surface.

Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. Included in this kit: - 6 x 5mm EZ-Bend segments - Flexible segments slot between road shifter hoods and Pro Compressionless housing run to allow for an appropriate bend at the handlebars

Lightweight one-piece Polypropylene thermoplastic pedals with in-molded grip nodes. - Durable boron steel axle - Loose ball bearing axle assembly - Built-in reflectors included - 309g per pair - 9/16" / 1/2 axle options - Dimensions: 100 x 86mm

Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. - Aluminum model accepts lines up to 5mm in diameter and the lines snap in. - Stainless model grips fully around the lines and is adjustable to fit most diameters.

Replacement crank bolt and puller cap set for Race Face Cinch cranksets.

Deore M6000 series 10-speed chainrings provide smooth and reliable shifting, ideal for off-road riding conditions. - Shimano HG-X technology - Compatible with 4-arm crank design

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact. - For Descendant Carbon and non-Eagle XX1 and X01

64BCD chainring for MTB cranksets

TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included

- Shimano, 22T, 9 sp, BCD 64mm, 4-Bolt, Deore FC-M590, Inner Chainring, For 22/32/44, Steel, Black, Y1LD22000

Lightweight low-profile one-piece Polypropylene thermoplastic pedals - Inlaid TPE non-slip rubber tread for unsurpassed grip - Tough 7mm boron steel axle - Loose ball bearing axle assembly - Built-in reflectors included - 230g per pair - 9/16" axle - Dimensions: 100 x 80mm

M21 rear derailleurs are designed to work with 6- and 7-speed Shimano road and mountain shifters. Enjoy the wide variety of bikes you can get going again with M21 rear derailleurs. - Robust composite and steel construction - Compatible with Shimano 6- and 7-speed mountain and road systems

M21 rear derailleurs are designed to work with 6- and 7-speed Shimano road and mountain shifters. Enjoy the wide variety of bikes you can get going again with M21 rear derailleurs. - Robust composite and steel construction - Compatible with Shimano 6- and 7-speed mountain and road systems - Long cage for double or triple cranksets and 32T max cassette cog - Includes frame hanger attachment for use with older frame designs

SRAM's PC-1 Single Speed Nickel Chain is designed for singlespeed bicycles so it won't jump off when you're laying down the power. It comes with a connector link for easy installation and removal.

Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Maximum cog size: 34t - Total capacity: 43t

- Compatible with 6 and 7-speed SIS Index Shifting drivetrains - Includes BMX/track frame hanger

- 13-30T - Indexed Adjuster - Weight: 230g-270g

- Conventional freewheel - Compatible with all Shimano 6-7 speed chains

The Shimano Tourney TX800 front derailleur offers precise shifting with HYPERDRIVE technology for 3x8 speed drivetrains. - Action: TOP SWING - Angled clamp band design - Applicable Top-Mid tooth difference: 10T - Chain line: 47.5/50mm - Chain stay angle: 66-69 - Top gear teeth: 42T/48T - Total capacity: 20T

Spare Pedal Pins for the Composite MK4 Pedals. Keep maximum traction on your pedals with new Pedal Pins. - 32 Pedal Pins - Enough for a pair of pedals - Used for MK4 Composite Pedals only

Crank Brothers' 5050 Pin Kit includes 40 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - 5mm - Stronger detent mechanism for use with brake housing - Perfect for mechanical disc brakes

Rocket II direct cable adjusters fit into Shimano STI shifters with external shift cable routing. - Rubber coated adjusting knobs for firm grip - Adjustable on the fly - 4mm

Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

- 1/8th inch chain for single speed use - Plate thickness and standard riveting - Pin width: 8.6mm - RustBuster coating (500292-05 only) increases resistance to rust; ideal for winter riding or salty environments - 399g (112L)

The KEO cleat covers are designed to protect your KEO cleats while walking. Compatible with KEO GRIP and KEO CLEAT, these covers lengthen the life of your cleats and improve safety when walking thanks to an anti-slip surface. - Compatibility: KEO Grip/KEO Cleat - Use: Protect the cleat

The Keo Spacer adaptors are slim wedges that fit between the shoe and the cleat. They aim to avoid the unpleasant creaking sound provoked by contact between the sole and the cleat, which can arise in particular with flat-soled shoes. Delivered with 2 spacers and 6 screws for quick and easy installation.

An affordable, Teflon coated 1/8" chain. Features a factory-installed master-link and half-link. Available in assorted colors for a custom look! Product Specifications - Size: 1/8" - Length: 100 Links - Includes: Half-Link and Master-Link - Weight: 11oz

SRAM's PC 830 Chain offers accurate shifting, excellent durability, and superior power transfer for 8-speed drivetrains.

Shimano Stainless Derailleur Cables Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2mm Double Ended: No Length: 3000 mm Quantity Included: 1

Chain FEATURE - Anti-corrosion treatment for longer service life BENEFIT - Anti-Corrosion

- Chainrings for SLX FC-M675 double cranks - Please refer to compatibility: 38T chainrings are available for 24T or 26T inner chainring and are not cross-compatible.

- Shimano, Tiagra FC-4703, Chainring, Teeth: 30, Speed: 10, BCD: 74, Bolts: 4, Inner, Steel, Grey, Y1RD30000

Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Wheel-type cable guide - Maximum cog size: 34t - Total capacity: 43t

Shimano's Tourney long cage rear derailleur incorporates advanced Shimano functions and styling that sets the standard for entry level components. - TY model comes with resin bracket and plate body for reduced weight - Zinc-plated adjustment screws for corrosion resistance - MegaRange compatible - Includes frame hanger - Maximum cog size: 34t - Total capacity: 43t

- Black polymer spacers - Multiple speed options available

- Front or rear brake compatible - Road specific - 1.5mm polished stainless steel cable

- For either front or rear shifter - Road & MTB compatible - 1.1 polished stainless steel cable

- DualHex kits: 5mm-broach bolts with 6mm-broach nuts for secure 2-wrench assembly - Triple kit can be used on 5-arm or 4-arm mountain/road cranks (includes 5 inner chainring bolts in addition to middle/outer bolt/nut set)

- Thick-thin tooth design for maximum chain engagement - Heat-treated forged steel - BCD: 82mm - Optimized for 11-12 speed system - Compatible with Gamma Pro and Alpha Drive 1x crankset

- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested

- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested

- HG technology has chamfered inner plates to optimise shifting performance on HG sprockets - Durability is assured through the heat treatment of rollers, pins, and plates - Includes connecting link - Weight: 335 grams