Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Prices
  • Show Fewer Prices
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Controls

3T Apto Pro
$89.99
For 56 years, 3T products have offered a combination of Italian elegance and performance. The Apto once again combines both with a beautiful shape and a lightweight, stiff and strong structure. The reversed bolts clean up the faceplate, while their wide spacing increases the connection to the handlebars. Its double steerer bolts securely hold the stem in place.
3T Arx II Pro
$99.99 - $102.99
3T's Arx II is a subtle refresh of the well-liked Arx alloy stem, which has found a place on every sort of bicycle since its launch in 2007. The faceplate is drawn in tighter at top and bottom for a more ovalized frontal appearance, while retaining the cutout 3T logo. The sides of the extension are slightly flattened for a more sculpted look by comparison with the tubular section of the first-generation Arx. A single M7 bolt clamps the stem to the fork steerer, instead of the twin M5 bolts previously used, and the Allen bolts used on the original Arx have been replaced by no-strip Torx bolts. - Stack height: 40mm - Weight: 135g (110mm)
3T MTB Stem Pro (+/- 10 degrees)
$99.99
3T's MTB Stem is tailored for the rigors of mountain biking, from XC to enduro. A wide stem clamp and squared-off stem body result in exceptional resistance to torsional and bending loads. Built of stiff aluminum and outfitted with titanium Torx bolts, the MTB stem is robust, stiff, and durable.
3T Riser 740 Pro
$99.99
Built from 7075 aluminum, 3T's Riser 740 Pro slays singletrack, all-mountain lines, and even enduro. Stiff and durable, these bars stand up to heavy use. Rip on them out of every corner and feel the response.
3T MTB Stem Team (+/- 10 degrees)
$114.99
3T's MTB Stem is tailored for the action of mountain biking, from XC to enduro. A wide stem clamp and squared-off stem body result in exceptional resistance to torsional and bending loads. Built of stiff aluminum and outfitted with titanium Torx bolts, the MTB stem is robust, stiff, and durable.
3T Arx II Team Stem
$120.99 - $129.99
3T's ARX II Team stem is the perfect finishing touch. It's made of aluminum for light weight, durability, and excellent stiffness. Refined shaping of the clamping areas results in outstanding stress distribution on the bars and steerer for safety. Plus, it features 3T's secure aluminum 4-bolt faceplate. - Aluminum stem with 40mm stack height - Single M6 bolt clamps stem to fork steerer - T25 bolts on bar clamp - 120 grams for 110mm - Bar Clamp Diameter: 31.8 mm - S.H.I.S. Stem Clamp Diameter: 28.6mm - Weight: 120 grams (110mm)
3T Apto Team
$129.99
For 56 years, 3T products have offered a combination of Italian elegance and performance. The Apto once again combines both with a beautiful shape and a lightweight, stiff and strong structure. The reversed bolts clean up the faceplate, while their wide spacing increases the connection to the handlebars. Its double steerer bolts (Titanium in case of the TEAM version) securely hold the stem in place.
3T Apto Team Stealth
$139.99
For 56 years, 3T products have offered a combination of Italian elegance and performance. The Apto once again combines both with a beautiful shape and a lightweight, stiff and strong structure. The reversed bolts clean up the faceplate, while their wide spacing increases the connection to the handlebars. Its double steerer bolts (Titanium in case of the TEAM version) securely hold the stem in place.
3T Ergosum Pro
$149.99
You'll love the shaping of 3T's Ergosum Pro handlebar. A tight radius where the brake lever sits and a gradual bend make it easy to reach your levers while in the drops. Its triple-butted aluminum construction is lightweight and strong. Double cable grooves provide a smooth feel when you're on the tops.
3T Superergo Pro
$149.99
3T started life as a master dropbar manufacturer. Nobody else had the same technical ability to manipulate tubing, and thus 3T became the first company to focus on more ergonomic (i.e. more complex) shapes. That focus continues to this day, now with the complete shape freedom of carbon. The previous generation, the Ergonova, was lauded worldwide as the top ergonomic bar, in fact it was so good we didn’t touch the center section at all when designing the new SuperErgo. We did change everything else though, ensuring the SuperErgo will continue 3T’s streak as the ergo bar of choice for road cyclists from beginners to Team BMC and Team Aqua Blue. - Material: Alloy 7050 - Cable routing: External cable grooves - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Compatible - Di2 compatibility: Not compatible
3T Clip-On Pro Aerobar
$164.99
3T Clip-On Pro Aero Bars - For adding aero extensions (sold separately) to suitable bars with 31.8mm clamp diameter - Comes with clamps, cradles, silicon pads, and hardware - Color: Black
3T Riser 740 LTD
$166.99
Riser 740 is a medium-width, 30mm riser bar with a 9° backsweep. It’s aimed at riders who want more control on cross-country, singletrack and marathon racing, and even light Enduro. 3T compact-cockpit design leaves 264mm total width to either side of stem bulge to mount lock-out levers, cameras, and lights as well as grips, shifters, and brake levers. The bar can be cut down to 680mm width if required. Riser 740 Ltd is built in HM carbon-fiber and is one of the lightest bars of its type at 175g (uncut). - Material:HM Carbon - Clamp Diameter (mm):Ø 31.8 (+ 0.05 / – 0.1) - Back Sweep:9° - Rise (mm):30 - Width (mm):740 - Finish:UD Matt - Weight (g):175
3T Clip-On Team Aerobar
$184.99
3T Clip-On Team Aero Bars - For adding aerobar extensions (sold separately) to suitable bars with 31.8mm clamp diameter - Comes with clamps, cradles, silicone pads, and hardware
3T ARXA Team Stem (+/- 32-degrees)
$239.99
3T's Arxa Team is an adjustable stem to help you achieve your desired handlebar position. With 32° of range, the 100mm Arxa lets smaller riders achieve a low, aerodynamic position, and can also be used to raise the bars and alleviate back pain. Laser-etched markings help accurately record the desired angle and 3T's DiffLock splined coupling keeps it all secure.
3T Arx LTD
$374.99
Arx, Latin for stronghold and bridge, is 3T’s race-proven design for the perfect connection between fork and handlebar and suited to all cycling disciplines. Clamp design is optimized to ensure a secure fit on composite steerers and bars without the need for potentially damaging high torque values during assembly. 3T inhouse tests show Arx’s clamp by far exceeds the CEN standard, and also that it works very well with other brands of handlebar. Arx Ltd is the carbon-fiber version of the stem, with Ti bolts. Super-light and super-stiff, it is a highly evolved, modern design weighing just 118g.
3T Ergosum Team
$374.99 - $416.99
You'll love the shaping of 3T's Ergosum Team handlebar. A tight radius where the brake lever sits and a gradual bend make it easy to reach your levers while in the drops. Its carbon fiber construction is lightweight and strong. Double cable grooves provide a smooth feel when you're on the tops.
3T Rotundo Team
$374.99 - $395.99
A traditional round drop meets modern materials and the result is 3T's Rotundo Team. It's constructed of high-modulus carbon fiber with varying wall thicknesses that results in a lightweight and strong bar that's also super stiff for sprinting and climbing. Double cable grooves provide a smooth feel when you're on the tops.
3T Tornova Team
$374.99
Tornova combines the plush comfort tops of Ergonova with the traditional round bends of Rotundo for a pattern many riders have been waiting for. Two new features further enhance Tornova’s comfort and convenience: internal cable routing, and stepped location for the brake/shifter units. The stepped-location feature molds a small downwards step above the shifter clamp, so the shifter tops align truly flat with the top of the bar. This makes for a more comfortable handhold. Internal routing aligns cables better, so the bar assembly is tidier and gear changes snappier. Tornova Team is a versatile, light racing bar that supports clip-ons. Tornova Team Stealth is a versatile, light racing bar featuring the elegant Stealth finish in Matte Black. Clip-on compatible. Note: Tornova bar width is specified center-to-center at hoods. Drops flare by 2° and are approx 1cm wider at bar end. Weight: 220g (42cm) Width: 40, 42, 44cm Bar: 31.8mm Material: Carbon Drop: 139mm Reach: 83mm Routing: Internal Finish: UD Gloss Black/UD Matte Black Certification: CEN
3T Aerotundo Team Stealth
$394.99 - $395.99
Aerotundo is a traditional round road drop with aero-section tops to complement the latest aero road bikes. The tops are a new aerofoil section designed for the least-possible drag permitted by UCI rules. Cable routing is internal for less drag, a sleeker appearance, and reliable setup of manual or electronic gear systems. The bend is medium-deep and square like Rotundo’s, with a 139mm drop. Width at the hoods is the same as at the ends. Aerotundo Team is built in all-carbon-fiber and finished UD Gloss Black with 3T’s new ‘Road’ brand graphics. It can be fitted with 3T and compatible Clip Ons for added versatility. Aerotundo Team Stealth is built in all-carbon-fiber and finished UD Matte Black with 3T’s new ‘Road’ brand graphics. It can be fitted with 3T Clip Ons. Weight: 220g (42cm) Width: 40, 42, 44cm Clamp: 31.8 mm Material: Carbon-fiber Drop: 139mm Reach: 113mm Finish: UD Gloss Black/UD Matte Black Certification: CEN
3T Superghiaia Team Stealth
$419.99
We love mixed surface/adventure/gravel/all-road riding. So many names, yet none convey how much fun it is. The SuperGhiaia is perfect for stringing together paved and unpaved sections, by providing comfort in all hand positions. The key? Combining a straight (not weirdly angled) hood position with an extreme flare for control in the drops. Perfect for your Exploro. The SuperGhiaia Twist-Drops start out straight, allowing the hoods to be in their intended position, and then twist out to provide the flare needed for increased control. This makes the SuperGhiaia the most comfortable gravel bar on the market in all possible hand positions. The Twist-Drops have distinctly different twists for the narrow and wide sizes based on feedback from both pros and amateurs during the design phase. - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Sphinx LTD
$437.99
3T designed their endurance track racing handlebar, the Sphinx LTD, for off-the-front efforts. Shaping and aerodynamics are the themes here, with reinforced high-modulus carbon fiber used throughout to achieve awesome responsiveness and superior aerodynamics. The tops are aerodynamically shaped for a speed advantage on the boards. Your hands will love the specially shaped "wingtips" that give you an ergonomically efficient area to hold on to when you're taking a lap on the competition.
3T Superergo Team
$439.99
3T started life as a master drop bar manufacturer. Nobody else had the same technical ability to manipulate tubing, and thus 3T became the first company to focus on more ergonomic (i.e. more complex) shapes. That focus continues to this day, now with the complete shape freedom of carbon. The previous generation, the Ergonova, was lauded worldwide as the top ergonomic bar, in fact, it was so good we didn’t touch the center section at all when designing the new SuperErgo. We did change everything else though, ensuring the SuperErgo will continue 3T’s streak as the ergo bar of choice for road cyclists from beginners to Team BMC and Team Aqua Blue. - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Superleggera Team
$439.99
Superleggera, the lightest 3T drop bar, ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 186g - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Ergosum LTD
$458.99
You'll love the shaping of 3T's Ergosum LTD handlebar. A tight radius where the brake lever sits and a gradual bend make it easy to reach your levers while in the drops. Its high-modulus carbon fiber construction with varying wall thicknesses results in a bar that's lightweight and strong for sprinting and climbing. And, double cable grooves provide a smooth feel when you're on the tops.
3T Rotundo LTD
$458.99
A traditional round drop meets modern materials and the result is 3T's Rotundo LTD. It's constructed of high-modulus carbon fiber with varying wall thicknesses that results in a lightweight and strong bar that's also super stiff for sprinting and climbing. Double cable grooves provide a smooth feel when you're on the tops.
3T Tornova LTD
$458.99
3T's Tornova LTD carbon bars give you comfort in an ultra light, stiff package. Traditional round bends feature a small downwards step above the mounting area for the shifter clamp, enabling the shifter tops to align truly flat with the top of the bar. This makes for a more comfortable handhold. Internal routing aligns cables and keeps your bike's front end smooth, so the bar assembly is tidier and cables stay cleaner.
3T Scatto LTD
$479.99
Scatto Ltd is a pure track sprinter's bar for elite-level track competition. It offers superb control and handling even in the most hectic races. Australian champion Anna Meares has won many races on this bar, including the Olympic sprint gold medal at London 2012. Wind tunnel tests show that the aerodynamic design produces far less drag than any standard round-section bar. This is achieved at no compromise to strength: Scatto is 50% stiffer than the reference bar formerly used by many of today's medal-winning track sprinters, as well as lighter. Its unique, radical design also imparts a stunning visual signature. Scatto Ltd has a 35cm width with a 128mm drop.
3T Superleggera Team Stealth
$479.99
Superleggera, the lightest 3T drop bar ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 186g - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Superergo LTD Stealth
$589.99
Since its introduction, the most common feedback on our Ergonova dropbar was “don’t change a thing”. But observing how our customers ride, we noticed many spend considerable time holding the bars in the corner section, especially while climbing. Designing the corners specifically for this function has created a bar that is supremely comfortable not only on the tops and the drops, but also in this intermediate position. Further redesigns to the hood and drop shapes to accommodate the latest shift/brake levers help to create the new standard in ergonomics - Material: Unidirectional carbon - ultralight layup - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Superleggera LTD Stealth
$589.99
Superleggera, the lightest 3T drop bar ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 166g - Material: Unidirectional carbon - ultralight layup - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Revo LTD
$942.99
The bullhorn bar was introduced to the cycling world by 3T on Francesco Moser’s hour record bikes. Its design principle hasn’t significantly changed since, until now. The Revo seems so obvious, now, providing a better, safer and more powerful grip for the rider. Then again, good ideas always seem obvious after the fact. Revo is the first-ever aerobar to attach the basebar wing to the front of the grips instead of the back, literally changing aerobar design 180°. The advantages are clear: - The rider’s hands cannot slide forwards off the grips, so it’s safer and easier to use at all times - It offers better grip and handling on tough descents, rough roads, and sketchy turns - It improves aerodynamics — the basebar wing has a sharper angle of attack with the free air flow than standard basebars - Wing material: Unidirectional carbon - Extension material: Unidirectional carbon - Cradle material: Alloy - Pad material: Neoprene - Base bar width (c-c): 400mm - Outside pad width: 240-340mm - Center pad width: 130-230mm - Pad stack: 30-97mm - Pad reach: 20-70mm - Grip inside reach: 72mm - Grip drop: 46mm - Clamp diameter: 31.8mm - Extensions: S-bend - Cradle: New comfort - Weight: 700g (minimum stack) - Finish: Stealth black
3T Vola LTD
$979.99
Everyone's biometrics are different; no two cyclists should conform to the same TT set up. Comfort (we're talking about power-production) combined with aerodynamics, yields speed. You need the combined forces of both, and to do so you need to find your optimal position, which is why 3T designed their Vola LTD cockpit to be highly adjustable, not to mention light, stiff, and aero. - Narrow, aero-optimized base bars are built with 3T's HM carbon, cutting weight by huge margins - The super-low aero position favored by time trial specialists is possible with extension clamps mounted on the underside of the base bar - Arm pad stack height above the stem center line ranges from 30mm in the low position, to 97mm using all the included spacers in the top-mounted position - Width between the arm pads ranges 220—340mm, measured at pad outer edge - Arm pad reach can be set 20—70 mm ahead of the basebar center, measured at pad front edge - The arm pads rotate in their clamps -A reinforcing bridge is included for rigid, shake-free set-up, that can also double as a convenient computer clamp - Carbon aero extensions - Carbon base bars - Carbon 3T Comfort Cradles with neoprene pads - Weight: 750 grams in the "low position" - UCI legal
Avid Disc Bracket Mounting Bolts (Stainless)
$9.09
Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.
Avid Rim Wrangler 2 Brake Pad Inserts
$12.00
Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.
Avid 20R Brake Pads
$14.99
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
Avid FR-5 Single Brake Lever
$14.99
Light and smooth, Avid's FR-5 Brake Levers deliver excellent speed control and a great feel. They're compatible with linear-pull and mechanical-disc brakes. And, they also feature adjustable reach and are made to bend not break in the event of a crash. This ambidextrous lever can be used as a front or rear, too.
Avid CPS Hardware Kit (Stainless Steel)
$19.99
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
Avid Rim Wrangler 2 Brake Pads (w/cartridge)
$21.99 - $23.00
Bolt on Avid's Rim Wrangler 2 Brake Pads for excellent stopping power. The cartridge design makes it easy to switch pads when they wear out. They're designed for use with linear-pull brakes.
Avid Shorty Brake Pad Inserts
$22.99
Slip Avid's Shorty Brake Pad Inserts into your Shorty cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.
Avid Disc Brake Pads (Juicy/BB7/BB5)
$24.99 - $38.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Speed Dial 7 Single Brake Lever
$24.99
Stiff, light and beautiful, Avid's Speed Dial 7 Brake Levers deliver excellent speed control and a great feel for your linear-pull or mechanical-disc brakes. And, they also feature adjustable reach for maximum hand comfort and are made to bend, not break, in the event of a crash. Plus, by turning Avid's Speed Dial knob, you can precisely tune the feel of your brakes any time without tools. This ambidextrous lever can be used as a front or rear lever, too.
Avid FR-5 Brake Levers
$29.99
Stiff, light and beautiful, Avid's FR-5 Brake Levers deliver excellent speed control and a great feel. They're compatible with linear-pull and mechanical-disc brakes. And, they also feature adjustable reach and are made to bend not break in the event of a crash.
Avid Disc Brake Pads (Code)
$34.99 - $50.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Disc Brake Pads (Elixir)
$34.99 - $42.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
Avid Front 180mm/Rear 160mm Post Bracket Hardware Kit
$34.99 - $76.99
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
Avid Shorty Brake Pads (w/cartridge)
$35.99
Bolt on Avid's Shorty Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.
Avid Hydraulic Line Kit
$39.99 - $64.00
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.
Avid Shorty Ultimate Brake Pads (w/cartridge)
$43.99 - $77.99
Bolt on Avid's Shorty Ultimate Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.
Avid MatchMaker X (Single)
$44.99
Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.
Avid BB5 Road Cable Disc Brake Caliper
$47.00
Cost effective stopping power from the leader in cable-actuated disc brakes. - For use with short cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Rotor Included: No - Weight: 215 g
Avid BB5 MTN Cable Disc Brake Caliper
$49.99
Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g
Avid HS1 Rotor
$54.99 - $64.99
Smooth, controlled braking is yours with Avid's HS1 Rotor. It utilizes cross-drilled technology to dissipate heat, save weight, and give you a consistent feel at the lever and predictable speed control in all conditions.
Avid CPS Hardware Kit (Titanium)
$55.99
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that allow the caliper to move as you install your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get excellent caliper alignment! This kit includes ultra-light titanium hardware with washers for CPS (Caliper Positioning System) mounting.
Avid G2 CleanSweep Rotor
$57.00 - $69.99
Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.
Avid Standard Hardware Kit (Titanium)
$57.99
For the ultimate light-weight brake setup, Avid ditched the concentric caliper-centering washers and gave you titanium bolts to save precious grams. This kit includes ultra-light titanium hardware for standard (direct-mount) mounting.
Avid Avid Complete Calipers
$82.99
- Complete caliper replacement for avid hydraulic disc brake systems - Calipers are 74mm post-Mount to be used with applicable adapters - Includes: Caliper, bleed screw(S), pistons, and brake pads
Avid BB7 Road Cable Disc Brake Caliper
$83.00
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with short cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No - Weight: 204 g
Avid HSX Rotor
$84.99 - $94.99
Smooth, controlled braking is yours with Avid's HSX Rotor. It utilizes cross-drilled technology to dissipate heat and shed water, giving you a consistent feel at the lever and predictable speed control in all conditions. And, an aluminum carrier cuts down on the weight.
Avid MatchMaker X (Pair)
$89.99
Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote for maximum convenience and ease of use.
Avid DB3 Hydraulic Disc Brake
$109.99
When you’re tackling rough trails, very little affects your confidence and control more than your brakes. With increased negative volume to combat heat expansion, plus powerful larger-caliper pistons, Avid's DB3 gives you the power and modulation to up your dirt-shredding game. Increased power comes courtesy of a super-stiff, 2-piece caliper that contains larger pistons and DOT 4 fluid for better heat dissipation and resistance to brake fade.
Page 1 of 11 Next page