Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

e*thirteen by The Hive Chain Guide Bearing Kit
$19.99
- Service parts for E-13 chainguides - Fits: DRS, DSS, and DS models
e*thirteen by The Hive Chain Guide Upper Slider Kit
$22.99 - $24.99
- Service parts for E-13 chainguides
e*thirteen by The Hive Chain Guide Idler Pulley
$23.99
- Service parts for E-13 chainguides - Fits: 06+ single ring guides
e*thirteen by The Hive Chain Guide Lower Slider Kit
$25.99
- Lower slider replacement parts for E-13 chainguides
e*thirteen by The Hive TRS Plus 27.5-inch
$74.99
The TRS Plus tire utilize the same tread pattern as previous versions, but have been reengineered with the addition of tapered Apex inserts designed into the tire, increasing grip under cornering and braking, while decreasing rolling resistance. - Aggressive tread pattern with a structural, angled base on the side knobs to control tire roll under high-speed cornering - Sipes are positioned to provide confident transitions from straight lines to cornering and confident braking traction - Ramped, shorter center knobs keep TRS tires rolling fast - Single-ply design with slow rebound tacky rubber throughout the tire - Tubeless-ready design
e*thirteen by The Hive TRS Race 27.5-inch
$84.99
The TRS Race tire utilize the same tread pattern as previous versions, but have been reengineered with the addition of tapered Apex inserts designed into the tire. Combined with a layer of woven aramid reinforcement to protect against sidewall cuts and punctures, increasing grip under cornering and braking, while decreasing rolling resistance. - Aggressive tread pattern with a structural, angled base on the side knobs to control tire roll under high-speed cornering - Sipes are positioned to provide confident transitions from straight lines to cornering and confident braking traction - Ramped, shorter center knobs keep TRS tires rolling fast - Race tire features a single-ply design with slow rebound tacky rubber center tread, with high-tack rubber on side knobs - Tubeless-ready design
e*thirteen by The Hive Plus Pedals
$198.99
e*thirteen's Plus pedal features a lightweight aluminum pedal body and 22 traction pins. - Lightweight aluminum pedal body - 22 traction pins - 9/16"
e*thirteen by The Hive e-spec Race Bosch Gen 4 Crank
$476.99
The e*thirteen e*spec Race Carbon Crank Arm Set is designed to work with Bosch Gen 4 eBike motors. These carbon crank arms offer a slim Q-factor and smaller overall profile, while keeping e*thirteen's proven crank technology at the forefront. - An 8mm self extractor bolt is built into both arms for easy removal - World-Cup DH-rated layup and construction - Compacted carbon fiber with an additional 3k added to front and rear faces of crank for impact resistance - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 141/148 Boost Hubs, 150/157 Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Designed for ebike: Yes - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount Bosch - BB Included: No
e*thirteen by The Hive TRS+ Dropper Seatpost
$499.99
The TRS+ from e*thirteen is a fully mechanical dropper post focused on reliability, simplicity, and durability. This is a coil spring post with pre-set mechanical stops along it's travel range. No bleeding, no loss of air pressure or depleted nitrogen charge. And, your saddle position is rock solid, locked into place with a heat-treated cam instead of a hydraulic mechanism. The internally routed cable is controlled by a left, shifter-style lever that is best suited to 1x drivetrains. - 4 pre-set travel positions - Shifter-style remote is SRAM MatchMaker compatible, fully weather sealed, and uses a cartridge bearing at the lever pivot - Shop-serviceable with common tools: No oil or air pressure needed - Cable head is at the bottom of the post, clamped at the remote for easier removal during maintenance or shipping - Double bolt clamp: fits both standard and 7 x 9mm carbon rails - 5-Year warranty
absoluteBLACK Oval Direct Mount Chainring for CINCH 3mm Offset
$113.99
absoluteBLACK Oval Direct Mount 1x Chainrings for CINCH greatly improve traction and climbing abilities. They are designed for Race Face cranks that utilize the CINCH system. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 3mm offset is designed for bikes with Boost spacing and fat bikes (when reversed)
Zipp Disc Wheel Valve Cover Patches
$8.00
A simple solution for completing the Zipp aerodynamic package by covering the valve access hole on most disc wheels. Black, self-adhesive oval patches with the Z logo, in a package of five.
Zipp End Plug Cable Guide Vuka Extension
$8.00
Zipp Speed Weaponry Vuka Extension End Plugs - Plastic bar end plug pair for 22.2mm extensions
Zipp End Plug Vuka Extension
$8.00
Zipp Speed Weaponry Vuka Extension End Plugs - Plastic bar end plug pair for 22.2mm extensions
Zipp AM Rim Tape
$9.00
Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.
Zipp Service Course Bar End Plugs
$9.99
ZIPP Service Course Bar End Plugs, Qty 2.
Zipp Tangente Tube Wrench
$9.99
Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender
Zipp Sapim CX-Ray Straight Pull Spokes and Nipples
$14.69 - $22.99
- Replacement straight pull spokes for Zipp 88 (Front) and 188 (Rear) Hubs
Zipp SL Speed DI2 Battery Mount
$15.00
Designed for use with the Zipp SL Speed Seatpost; an internal mount to hold a Shimano DI2 seatpost battery. - Mount compatible only with B1 SL Speed seatpost - Weight: 18g for 27.2mm, 19g for 31.6mm
Zipp Zipp Tangente Valve Extenders - Removable Core
$17.99 - $44.99
Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually. - For use with removable valve core Presta tubes - Knurled end to keep pump from slipping - 3mm hex broach in the barrel to guarantee a perfect seal when tightened - Integrated air seal
Zipp Zipp Tangente Valve Extender - Threaded Core
$19.00 - $19.99
Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened
Zipp Tangente Valve Extender
$19.99
Zipp's Tangente Valve Extender is for use with Zipp butyl inner tubes and Zipp Tangente tubular tires with removable valve cores; and other leading tubular tires and inner tubes that have removable cores. It lengthens the valve so that it protrudes far enough from deep-section aero rims/wheels so that you can attach your pump to inflate your tire. This extender is made of lightweight aluminum, has a threaded tip for you to screw in your valve core so you can still seal the valve, and it is made with the same attention to detail that's built into Zipp's wheels and other products.
Zipp Handlebar Gel Pad Set
$21.99
Zipp’s Handlebar Gel Pad Set is a fast, easy way to minimize the countless bumps and vibrations from riding on less-than-perfect roads. This pack of two precision-shaped silicone gel contours to the tops of drop-style handlebars. Without tape on the bar, roll back your brake hoods and place the specially designed gel strips on the top of the bar from where the brake is attached to the handlebar. Simply rewrap your bar tape over the gel and enjoy the smooth ride.
Zipp 77/177 Disc Conversion Caps
$25.00 - $38.00
Zipp Speed Weaponry Hub Conversion Caps
Zipp Decal Set
$27.00 - $27.20
These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.
Zipp Vuka Clip Riser Kit
$32.99
Zipp's Vuka Alumina Clip Risers are designed for use with the Vuka Alumina Clip’s above-bar option. The risers are designed to offer a wider range of adjustability within the Vuka Alumina aero-cockpit system. - Sold in pairs - Risers cannot be stacked - Includes hardware
Zipp Vuka Alumina Clip Armrest Pad Kit
$33.00
- Includes 2 replacement pads and Velcro - May be used with the older Vuka Clip and Vuka Aero - Elbow pads embossed with Zipp brand logo
Zipp Vuka Clip Armrest Pad Kit
$35.00
Zipp Speed Weaponry Aero Bar Parts - Includes 2 replacement pads and Velcro - May be used with the older Vuka Clip and Vuka Aero - Elbow pads embossed with Zipp brand logo
Zipp Vuka Clip Riser Kit
$35.99
Vuka Alumina Clip Risers are designed for use with the Vuka Alumina Clip's above-bar option. The risers are designed to offer a wider range of adjustability within the Vuka Alumina aero-cockpit system.
Zipp Disc Valve Adapter
$44.00
• Synthetic elastomer gasket with 2X the holding power and 5X wear resistance of traditional gasket materials • Two stage seal design, improves sealing and stability on all presta valve stems • Adjustable compression, user can tighten the cap to increase holding power by 4X and compensate for wear •15 degree stem angle reduces stress on the valve stem from pump hose • 12.0g
Page 1 of 87 Next page