Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Pumps/Inflation

$14.99
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.
$159.99
Heat is the enemy of mini-pumps. More strokes generate more friction which produces more heat—and heat is wasted energy.  Unlike most mini-pumps, Pocket Impero does not suffer from efficiency loss when hot.  Pocket Impero is between a high-pressure and high-volume pump. At 200 strokes the Pocket Impero reaches higher pressures than any other pocketable pump ever tested in the BikeRadar test protocol, meaning that it is pushing more air with fewer losses than pumps of either high-pressure or high-volume designs. The unique Slide-Lock Silicone sleeve improves grip and doubles as a handle lock when in your pocket. - Full alloy construction with CNC alloy head - Premium leather piston gasket and brass check-valve - Slide-Lock Silicone sleeve - Length: 8 in (20.3cm) - Weight: 5.3 oz (150gm) - Pressure at 200 strokes (BikeRadar protocol): 89psi - Warranty: Silca Shield, 25 year hard parts warranty
$61.00
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
$13.00
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves
$120.00
Get accurate and precise results every time with RockShox's High-Pressure Digital Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large digital BAR/PSI readout. It runs off one CR2032 battery (included) and the hose swivels 360-degrees to fit anywhere.
$55.00
Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere.
$74.00
Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere. And it handles an astounding 600 psi max.
$59.99
FEATURES -Flexibly carry your trail essentials on any bike -No rattle, no slip - Unique strap attachment secures wrap firmly to your bike -Fast access to your tools in trailside emergencies -Waterproof material with durable welded seams keeps your tools clean -Waterproof zippered stash pocket keeps essentials dry -Modular design works with or without an innertube -Reflective print for extra visibility -Available in Nightrider Black, Slate Grey and Moss Green WHAT'S INCLUDED? HoldFast Tool Pouch HoldFast Tool Wrap Strap
$39.99
FEATURES: -5 x threaded co2 cartridges per pack. -Including 1 Freeze Protector sleeve with unique closed base design. -Packaged using recycled cardboard header cards. -Biodegradable bags. The quickest and easiest way to reinflate a tyre When paired with a Peaty's Holehot CO2 inflator. Go from 0 to 30psi in less than 20 seconds!
$49.99
Why use CO2 inflators over hand pumps: If the hole in your tire is so big that sealant can't seal it, your tire will lose all air pressure and, most of the time, the tire bead will pop off the bead seat on the rim, creating air gaps all the way around the tire bead. As anyone who has set up tubeless tires before will know, getting enough air into the tire to pop the tire bead back onto this bead seat isn't easy, even when you're in the comfort of your home workshop, never mind out on the trail with a group of impatient mates - or worse - mid race. A lot of people carry mini hand pumps with them, and they're great for re-inflating small amounts on the trail after slight pressure loss, but you'd need forearms like popeye to re-seat your tire with one! Without doubt, the quickest and easiest way to get you back riding while out on the trail is with a CO2 inflator. Not only do they get you back up and riding again much quicker than a hand pump, they are much smaller and easy to carry with you on your ride. Designed for durability: Made from CNC'd 6061 aluminium, and with a patent-Pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the o-rings to the awesome chris king anodized colours. Straight line is the fastest line: Peaty's straight line, compact design enables faster airflow for rapid inflation, and creates less stress on your tubeless valves when you're using it because you're coming at the valve straight on rather than at a 90 degree angle. From Flat to inflated in less than 10 seconds! No gloves, no problem! Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high quality CO2 cartridge sleeve. Far from a cheap strip of neoprene, the freeze protector sleeve is made from temperature resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves. Features: Unique, compact, straight-line design for maximum airflow Simply push down to inflate - Release to stop Unique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without gloves Manufactured from 6061 aluminium Application: Remove valve cap and loosen the valve core. Check the valve is clear by pressing down the loose valve core. You should hear air flowing through the valve Cover the CO2 cartridge with the closed-base freeze protector sleeve provided Screw the CO2 cartridge fully into the inflator head. You may hear a small hiss when the cartridge is successfully pierced. If not, give the valve a quick press and you should hear gas 'tsssst' out Press the head over the valve and push straight down firmly to discharge the cartridge and inflate the tire to your desired pressure. Releasing the inflator head will stop the flow Once the tire is inflated, remove the inflator, re-tighten the valve core and re-apply the valve cap Included: 2 x 25 g CO2 cartridges 1 x Inflator Head 1 x Closed Base Freeze Protector Sleeve
$36.99
WHAT'S INCLUDED? Each kit comes with one sheet of 3mm plugs and one sheet of 1.5mm plugs which store wrapped around the fork, neatly hidden away inside the tool pod. FEATURES -The quickest and easiest way to fix punctures that sealant can't -Unique single-sided fork design - simply push and roll the plug into the hook of the fork -Leaves the Plug in place each time without pulling it back out of the tyre -The fork is sharp tipped & as slim as possible so it doesn’t widen the size of the hole already there Like most traditional products on the market -Knurled body and ribbed lid / handle for extra grip -Weather sealing o-rings make the tool waterproof when assembled -Fork made from 316 stainless steel -Body made from anodised 6061 aluminium -Available in 12x Chris King colours
$8.99
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
$89.99
The EDC Pump offers a unique storage solution integrated into a high volume pump. It is designed to integrate with the EDC Tool System, CO2 canister or your favorite stash. Crafted from aluminum with a durable textured machined finish. PUMP VOLUME A mini pump might look appealing, but with typical volumes of 30-60cc it will take hundreds of strokes to inflate a new tube and has absolutely no chance of re-inflating a tubeless setup. When you get a flat, you want to fix it as fast as possible as riding time is precious. At 100cc and at 160g our high volume pump has the highest volume to weight ratio on the market. FAST-ON HEAD Firmly push the pump head onto the Presta valve until it bottoms out, then pump. With our fast-on head the valve stem is securely supported so there's no chance of bending, breaking or unseating the valve and no chance of unscrewing your valve core when you remove the pump.- Crafted from 6061-T6 aluminum with a durable textured machined finish. - 2 Sizes: High Volume 100cc & Compact 70cc - 1-1/4 diameter x 10 length for 100c (160g) - 1-1/4 diameter x 7 length for 70cc (135g) - 100cc Pump holds EDC Tool & a 20g CO2 or EDC Tool & the Storage Capsule - 70cc Pump holds EDC Tool (no Storage Capsule) or a 20g CO2 - Fast-On Head (Presta Only) - No threads or locking levers - Integrated CO2 Inflator - Fully Sealed, Weatherproofed Internals - Includes Bottle Cage Mount - Material: 6061-T6 - Weight: 135g - 70cc, 160g - 100cc (without EDC tool system)
$19.99
- Replacement ABS Flex Hose for Lezyne hand pumps - Presta/Schrader ABS Flex Hose for HP, HV, Alloy, Pressure, and Tech Drive hand pumps
$159.99
The Alloy Digital Drive is a durable bicycle floor pump with a beautifully constructed CNC-machined aluminum barrel and base. It has a stylish wood handle with an aluminum junction and a steel piston built to last a lifetime. Highly accurate, easy-to-read 3.5” (88.9 MM) digital gauge. Extra long, nylon-reinforced braided hose with aluminum couplers. ABS1 Pro equipped. - CNC machined aluminum construction - Precision 3.5-inch hi-visibility digital gauge - 220 PSI - Varnished wood handle with aluminum junction - Extra-long nylon reinforced braided hose with aluminum couplers - ABS1 Pro chuck
$189.99
The CNC Digital Drive is the ultimate, professional-grade bicycle floor pump which features a large digital gauge. Its full CNC-machined aluminum construction and hardware are built to last a lifetime, and replacement wear parts are readily available. Highly accurate, easy-to-read 3.5” (88.9 MM) digital gauge. The CNC Digital Drive comes with an extra-long, nylon-reinforced braided hose with aluminum couplers. At the end of the hose is the top-of-the-line ABS1 Pro floor pump chuck. - CNC-machined aluminum construction - Precision 3.5-inch digital gauge (220 psi / 15 bar) - Extra-long nylon reinforced braided hose with aluminum couplers - ABS1 Pro for Presta and Schrader chuck
$64.99
- Pocket size - CNC machined aluminum - Compact highly efficient overlapping handle - Presta and Schrader valve compatible ABS Flex Hose - Includes integrated valve core tool - Aluminum mounting bracket - 140mm/160psi - 160 PSI / 11 BAR - Length 140mm - Weight 98g - Loaded includes twin speed drive CO2 head, 20g CO2 cartridge and lever kit
$199.99
The Pressure Over Drive is a floor pump with an integrated system designed to seat tubeless tires. This offers tubeless tire users a portable alternative to air compressors and eliminates wasting CO2 cartridges. It features a secondary chamber that can be manually pressurized and then released with the integrated foot-lever. This provides a strong, continued blast of air capable of seating road, mountain and plus-sized tubeless setups. It’s built for durability and reliability with its steel and aluminum construction, and its aesthetics are enhanced with a comfortable, stylish wood handle. The Pressure Over Drive has a 220psi (15 bar) pressurizing limit, with a built-in safety release in the event of over inflation. It comes equipped with an extra-long, nylon-reinforced braided hose and our Presta/Schrader-compatible ABS2 chuck. It can also be used as a regular floor pump. - ABS2 equipped
$79.99
Grip and rip with Lezyne's Shock Drive portable shock pump. With a full CNC-machined aluminum body, tough composite gauge, and palm-sized ergonomic handle, you can pump reps with Schwarzenegger pep till your shock's content. The zero-loss chuck ensures accurate ride pressures up to 400 psi, and its light weight and durability make it great for trail or shop use.
$24.99 - $29.99
Lezyne's lightweight, powerful Sport Drive HV mini-pump quickly inflates your mountain bike tires so you can get back ro pedaling. Its oversize aluminum barrel and no-slip Composite Matrix handle help you get pumped up to 90 psi in a flash. And making your inflation experience even easier is a Presta/Schrader-compatible hose that stows inside the handle when not in use.
$79.99 - $84.99
The Sport Floor Drive floor pump features a steel barrel and piston with a tough composite matrix base for years of reliable use. Its oversized 3.5-inch gauge makes reading the pressure a breeze. - Extra-long, high-strength hose with composite matrix couplers - Durable, painted finish with varnished wood handle - Standard height - 220 psi max
$89.99
- Mid-volume steel barrel and piston with composite matrix base - Precision 3.5-inch gauge (100 psi / 6.89 bar) - Extra long, high-strength hose - Varnished wood handle - ABS1 Pro with Presta/Schrader valve chuck
$29.99
Lezyne's easy-to-use Trigger Speed Drive CO2 is super compact and portable. Its simple triggered operation lets you control exactly how much CO2 you're putting into your tires. Plus, it's press-on Presta compatible head is super fast to use and works with all threaded cartridges.
$89.99
- Durable fiber-reinforced Composite Matrix construction - Optimized side-load design for easy access in compact frames - Available in right-side configuration only - Integrated storage container - CO2 cartridge holder on both sides of the cage - Integrated storage container includes CO2 head, V Pro 17 multi-tool with tubeless reamer, and tire plug kits - Includes two 20g CO2 cartridges
$199.99
A lightweight aluminum adapter allows the use of a Schrader pump on Presta tubes.
$59.99
A reliable floor pump featuring a durable steel barrel, an auto-select head, and a stable base. Fresh air for your tires Nothing slows a cyclist down like an inappropriate amount of tire inflation. Loaded with features like a stable, tip-resistant base, a durable steel barrel, and an auto-select head, the Charger stands ready whenever your tires need a little boost. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy-to-read 3-inch base-mounted gauge - Max pressure 160 psi (11bar)
$99.99
A versatile floor pump that allows for easy transition between high volume and high pressure settings. A pump for road and MTB The Dual Charger Pump is versatile floor pump with multiple pressure settings that let you easily inflate high-pressure road tires and larger volume hybrid and MTB tires. A quick flip of the switch moves between settings, making it perfect for riders who own both a road and mountain bike. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy to read 4-inch base-mounted gauge - Base-mounted switch allows for easy transition between high volume and high pressure settings - High volume setting allows for quick inflation - High pressure setting allows for easy inflation as PSI increases - Max pressure 160 psi (11bar)
$69.99
A compact, efficient way to hold flat fixing essentials so you can get back on the bike quickly. The Pro Flat Pack has everything you need to fix a flat and get back on the bike quickly in an aero, easy to grab package. This all-in-one kit provides essential items needed to fix a flat tire with additional pockets for money and ID, plus extra soft, padded materials to ensure you won't be bothered by the poke of a tool while it's stashed in your back pocket. - Tight fitting, stretch neoprene material zips open for easy access - All the items you need to fix a flat tire - Includes Air Rush Elite, CO2‚ inflator, two 16g CO2‚ cartridges, and a padded bag - Reusable hand insulation sleeve, vulcanizing patch kit - Room in the bag for ID, money, keys, and more
$67.99
For the perfect pressure A shock pump with an accurate, easy-to-read gauge and a thread-on design that minimizes bleed off so you can easily adjust your shock pressure. The perfect pressure takes precision. The Bontrager Shock Pump features a large, easy-to-read gauge for accurate readings, a bleed valve for pinpoint accuracy, and a thread-on design that quickly attaches to front and rear suspension shocks for a reliable, secure connection. - Easy-to-read gauge that is accurate to 400 PSI - Threaded design for a secure connection that reduces bleed down - Bleed valve reduces pressure in small increments - Suitable for use with front forks and rear shocks
$214.99
A floor pump and a tubeless setup tool in one. Set to Charge for a pressurized chamber that makes at-home and on-the-fly setup of tubeless ready (TLR) tires a breeze. Tubeless setup made simple TLR Flash Charger is the single-pump solution for daily use and at-home tubeless setup. It functions just like a standard floor pump when set to 'Inflate'. Switching it to 'Charge' gives the ability to pressurize a chamber and 'flash release' the stored air in order to seat tubeless tires without a bulky air compressor. Plus, it has a broad, back-lit digital gauge that delivers accurate pressure readings all the way to 160 PSI. Product details - Dual-chamber design with Inflate setting allows for efficient use as a traditional floor pump - Set to Charge for a pressurized chamber that inflates tubeless ready (TLR) tires without a compressor - Digital gauge provides easy-to-read accuracy up to 160 PSI (recommended maximum) - Compatible with both Presta and Schrader valves - Included inflation accessories conveniently stored in handle
$32.99
Refills … get your refills here! - Threaded - 25 gram - 3-pack
$10.69
Refills! Get your refills here! Blackburn 25g CO2 Bulk Box of 16, Threaded-Metallic Silver Compatible with our Wayside inflators. Stash one in your seat bag or your back pack. Peace of mind that is much cheaper than a cab ride home! - THREADED CO2 - Carton includes 16 x 25g of CO2 cartridges - FASTER INFLATION - Allows for quick inflation on MTB, CX, and gravel bikes. - THREADED CO2 - Carton includes 16 x 25g of CO2 cartridges
$39.99
High volume for big tires, high pressure for skinnies. Simple. The Airstick 2-stage is a durable aluminum pump with enough puff for mountain bike tires and enough pressure for road tubes too, thanks to the two-stage high pressure/high volume switch. - Presta head only - High Volume or High Pressure - Includes frame mount - 85 gr/ 3oz - 160 PSI, 11 Bar maximum
$39.99
If it was any lighter, you'd be walking home. This is the smallest pump you'll ever use that will still get your flat fixed and you on your way again. There are no extra features here. Just the bare minimum to get your tire back up and you kicking butt. Because you can't kick butt with a flat tire. - Presta head only - High Volume or High Pressure - Includes frame mount - 85 gr/ 3oz - 160 PSI, 11 Bar maximum
$74.99
Inexpensive Doesn't Mean Cheap. The Core 2 pump still shares all the techy bits of its big siblings but is built for folks operating on a smaller budget. The AirTap head will function with Schrader/Presta/Dunlop valves and has an integrated bleed valve for dialing in your pressure. Our aviation-style gauge is 2.5 inches wide, and easy to read. It's also built into the base to add to the stability of the Core 2 during use. Whether you are in the basement, the garage or at the trail head, the Core 2 has you covered. - Dimensions: 4.25 x 9 x 24 inches Airtap Core Pump Head - Our AirTap reversable pump head works with Schrader, Presta or Dunlop valves and features an integrated air bleed button right at the valve for perfect pressure, every time. Aviation Guage - The 2.5-inch-wide base-mounted gauge lets you easily read your tire pressure, and adds to the footprint of the Core 2 pump's solid stance. Air Bleed - Button on the pump head to micro-adjust pressure.
$119.99
You’ve paid for full suspension, now it’s time to use all of it. When the trail gets steep and rough, can you tell the difference between 150psi and 170psi by pressing down on your saddle? No, you can't; and neither can we. The Blackburn Honest Digital Shock Gauge can. With pro shop-level precision, and a zero leak valve, the digital readout will ensure you put exactly the pressure you need in your shock. The days of "giving it a bounce in the lot" are over! - Accurate within 1% of pressure - Compatible with all thread on air shocks - Rated to 350 PSI/24 BAR Max - Shop precision quality - Zero leak valve - Replaceable battery - Auto on/off - Easy to read digital gauge - 215g
$99.99
Ride essentials. Going for a ride but don’t know what to pack? No problem; we’ve got you covered. The local ride kit offers up what you need to get home; and extra carrying capacity to bring along anything else. With a seatbag, mini pump, mini tool and tire levers, this little kit, bundled in a compact package, has all the tools you need to get out there and keep going. - Blackburn's Local Seat Bag (Medium) offers extra space to pack your tube, wallet, phone, or whatever you want - Blackburn Heist 6 Multi Tool provides a quality tool to make sure your bike is adjusted properly for your ride - Blackburn's Mountain AnyValve Mini-Pump comes equipped with their popular and proven AnyValve head, which works on Presta, Schrader, and Dunlop valves. - 2x tire levers
$29.99
Essential for your off-road adventures, this pump produces a hurricane-force air blast with its high-volume barrel. The oversized design, made from strong and lightweight aluminum, delivers more air per stroke so you can get back on the trail quickly. Details: - AnyValve pump head automatically adapts to Presta, Schrader, and Dunlop valves - Rebuildable internal parts available - Tough, lightweight aluminum barrel - Rubberized folding T-handle - Bike mount included - 90 PSI, 6.2 Bar maximum - 145g / 0.32lb
$28.99
Anyvalve pump head adapts to Presta, Schrader, and Dunlop valves. Details: - Rebuildable internals - Tough aluminum barrel - Ergonomic handle - Includes cage mount - 90 psi max pressure - 162g / 0.35lbs
$124.99
Take greatness, add more = more greatness. The simply stellar Pro Plugger gains a few extra ingredients for surefire success, the it-makes-sense CO2’FER head combining an inflator and valve tool along with a 25g threaded CO2 and universal frame-mounting kit, mean everything’s always within reach, even on bikes with long reach. No need to scurry about rounding up odds and ends trying to beat dwindling daylight—simply grab bike, go and you’re already equipped with the Pro Plugger Combo’s on-bike tubeless repair system. - Pro plugger rubber mount, strap, core CO2 inflator and 25g threaded CO2 included - 4.64oz
$53.99
Mini-pump for Gravel bikes This mini-pump has been developed to fit Gravel bike tyres, ranging from 35 to 47 mm wide. It offers the best compromise between inflation volume, ease of reaching the desired pressure and compactness. Made of aluminium, the Zéfal Gravel Mini is light and very resistant. Its flexible Z-Turn connection will give you peace of mind by avoiding bending or even breaking its Presta valve. - Weight: 105 g - Maximum recommended pressure: 5.5 bar / 80 psi - Length: 180 mm
$39.99
- Z-switch System (Presta, Schrader and Dunlop compatible) - Wide Gauge - Steel Base for better stability - Ball and Bladder Heads - Max Pressure 9 bar / 130 psi - Hose length: 800mm
$51.99
- Z-switch System (Presta, Schrader and Dunlop compatible) - Gauge with a magnifying lens - Integrated locking hook - Composite Base for better stability - Ball and Bladder Heads - Max Pressure 11 bar / 160psi - Hose length: 1100mm
$79.99
- Z-switch System (Presta, Scharader and Dunlop compatible) - In-line Gauge - Ergonomic and lockable T-handle - Double base for better stability - Carrying bag included - Max Pressure: 10 bar / 145 psi - Hose length: 610 mm
$25.99
Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure. - Fits Presta/Schrader - Accurate up to 160psi - Shows PSI and bar - Weighs only 37g
$47.49
The AirBooster is an incredibly small, lightweight and easy-to-use CO2 inflator. Precision CNC-machined from solid aluminum, the angled-head AirBooster fits Presta and Schrader valves and its special design allows the user to adjust the flow while filling the tire. Double-ended design allows cartridge storage. The supplied durable silicone CO2 Sleeve protects hands during inflation. * Use only Topeak CO2 cartridges. - CNC aluminum (Inflator) - Silicone rubber (Sleeve) - 22.5 g / 0.79 oz (Inflator) - 11 g / 0.39 oz (Sleeve) - Size: 4.4 x 3.7 x 1.5 cm / 1.7” x 1.4” x 0.6” (Inflator), 5.9 x 2.8 cm / 2.3” x 1.1” (Sleeve) - Double-ended design allows storage for 1 threaded CO2 cartridge - Includes CO2 Sleeve - Presta/Schrader w/integrated dust cap, push to inflate
$43.99
Topeak's CO2-Bra CO2 Inflator gives you speed and convenience when it's time to fix a flat. A flip-up thumb lever puts precise flow control in your hands while the ergonomic handle gives you a better grip while inflating. An integrated safety ring prevents accidental cartridge puncture during storage. The CO2-Bra accepts threaded 16g cartridges and works with both Schrader and Presta valves.
$229.99
The king has returned to rule! The new JoeBlow Ace DX features an innovative three-stage design that achieves both high pressures and high volume in record time. Stage one opens both barrels for big volume to reach 60 psi with 30% less effort than standard floor pumps. Stage two uses the main barrel only for pressures up to 120 psi while stage three engages the small barrel to achieve an amazing 260 psi. Two tone padded handles, wide stable base and new 4” base mounted analog gauge make inflation easy. The new SmartHead DX1 automatically adjusts to fit Presta and Schrader valves without swapping parts and the lower profile air release button makes getting the right pressure easy. Includes ball and air bladder type inflation needles. - SmartHead DX1 full metal pump head w/ air release button & x-long hose - Gauge: 260 psi / 18 bar; 4” base mount analog - Base: Aluminum/Rubber - Barrel: Anodized aluminum - Handle: Oversize dual tone - Weight: 2.45 kg / 5.4 lb - Size: 74 x 28 x 22 cm/29.1” x 11” x 8.7”
$84.99
Topeak's JoeBlow Fat is the first floor pump exclusively designed for low pressure fat tire bikes. The massive oversized barrel is 1.5 times larger than standard floor pumps and delivers big air volume to fill fat tire bikes quickly. Low pressure gauge with pressure release button on the hose head lets you adjust tire pressure accurately.
$57.99
Topeak's Joe Blow Max HP quickly inflates tires with a durable steel barrel, a sturdy composite base, a padded handle, and a tight-sealing TwinHead that fits Presta, Schrader and even Dunlop valves. You'll also appreciate the extra-long hose and big, easy-to-read gauge.
$179.99
The JoeBlow Pro DX’s new design brings form and function together for great performance in a floor pump. The aero-shaped aluminum barrel and wide base provide stability when pumping and the 3” top mounted analog gauge is easy to read up to 160 psi (11 bar). The large padded handles provide comfort while the extra-long hose can even reach wheels on bikes mounted in a stand. The new SmartHead with lower profile air release button automatically adjusts to fit either Presta or Schrader valves and makes getting the right pressure a simple task. - Head: SmartHead DX1 full metal pump head w/ air release button & x-long hose - Gauge: 200 psi / 14 bar - 3” top mount analog - Base: Aluminum / Rubber - Barrel: Polished aluminum - Handle: Oversize dual tone - Added Features: Dunlop valve adapter, Presta valve adapter, Ball / bladder heads, Hose dock - Size: 74 x 28 x 14 cm / 29.1” x 11” x 5.5” - Weight: 1.8 kg / 3.97 lb
$144.99
The aero-shaped barrel and wide steel base provide stability when pumping and the 3” top mounted gauge is easy to read up to 200 psi (14 bar). The large padded handle provides comfort while the extra-long and tangle-free hose can even reach wheels on bikes mounted in a stand. The SmartHead DX3 with lower-profile air-release button automatically adjusts to fit either Presta or Schrader valves and makes getting the right pressure a simple task.
$69.99
Air up your bike tires in a hurry with Topeak's JoeBlow Race Floor Pump. Its steel barrel, sturdy composite base and oversize padded handle make inflating high volume tires an easy task. For versatility, its easy SmartHead pump head tightly grips both Presta and Schrader valves, and the air release button lets you quickly fine-tune your pressure. You'll also appreciate the easy-to-read top-mount gauge and the extra-long hose.
$74.99
Topeak's Joe Blow Sport II quickly inflates tires thanks to its durable steel barrel and base, a tight-sealing aluminum thumblock head that fits Presta and Schrader valves as well as an oversized, padded handle. Plus, the easy-to-read gauge lets you dial in the perfect pressure every time!
$89.99
Topeak's Joe Blow Sprint quickly inflates tires thanks to its durable aluminum barrel, a sturdy steel base, a tight-sealing aluminum thumblock head that fits Presta and Schrader valves and an oversized, padded handle. And, the easy-to-read, top-mounted gauge lets you dial in the perfect pressure every time!
$219.99
Half air compressor – Half pump. The JoeBlow Booster pump just made it easier to install tubeless tires. This pump has an integrated aluminum air chamber that stores an air charge of one liter, up to 160psi / 11 bar, to quickly fill your tire and ensure the proper installation on a tubeless rim, just like a shop compressor. Once you flip the selector from “CHARGE” to “INFLATE” mode, air bypasses the chamber and flows directly into your tire like a standard pump. The top-mounted easy to read gauge, air release button and comfortable dual density polymer grip, combined with its extra-long hose and stable base makes mounting tubeless and standard tires a breeze! - ADDED FEATURE: Hose dock - BARREL: Anodized aluminum w/ large cylindrical aluminum chamber - BASE: Steel - GAUGE: 160 psi / 11 bar, Top mount analog - HANDLE: Oversize padded / Dual density polymer - HEAD: SmartHead DX3 w/ air release button & x-long hose - PRESSURE TUNING: Air release button - SIZE: 74 x 25 x 18.5 cm / 29.1” x 9.8” x 7.3” - WEIGHT: 2.9 kg / 6.4 lb
$94.99
This clever dual-gauge floor pump was exclusively designed for low pressure Fat-Bike tires and moderate pressure MTB tires. A massive oversized barrel is 1.5 times larger than a standard floor pump and delivers large air volume to fill oversized tires quickly. A 30 psi (2 bar) gauge shows precise low pressure for Fat-Bike tires while the 75 psi (5 bar) gauge shows higher pressures for MTB tires. An air release button on the TwinHead™ allows for fine-tuning pressure.
$104.99
This pump is equipped with a hardened steel base, solid steel barrel, and an easy to read top mounted analog gauge. An extra long hose with a TwinHead pump head makes it easy to reach valve stems and the integrated mini tool carrier keeps what you need for light maintenance close at hand.
$134.99
The JoeBlow Sport with unique 2-stage design delivers both high pressure and high volume in record time. Stage one opens both barrels for huge volume, reaching 30 psi with 30% less effort than standard floor pumps. Stage two utilizes the small barrel for pressures up to 160 psi. Hammer type TwinHead DX5 pump head with an extra-long and tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base provide extra stability. - Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose - Barrel: Painted steel / anodized aluminum - Gauge: 160 psi / 11 bar, 3" mid mount analog Stage 1 : 0 - 30 psi Stage 2 : 30 - 160 psi - Volume Per Stroke: 715cc (Stage 1), 258cc (Stage 2) - Handle: Oversize / Dual density polymer - Base: Hardened steel - Ball / bladder heads, Hose dock - Size: 74 x 26.6 x 18cm / 29.1" x 10.5" x 4.6" - Weight: 2.5kg / 5.51lb
$114.99
An easy-to-read mid-mounted digital gauge delivers accurate tire pressure readings up to 160psi / 11bar. Hammer type TwinHead DX5 pump head with an extra-long, tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base with ergonomic padded handle make it easy to get your ride up to pressure fast. - Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose - Barrel: Painted steel - Gauge: 160 psi / 11 bar, Mid mounted flip-down digital (Tolerance: < 100psi ± 1 psi / > 100psi ± 1%) - Unit: psi, bar, kg / cm² - Battery: CR2032 x 1 (included) - Volume Per Stroke: 318cc - Handle: Oversize padded / Dual density polymer - Base: Hardened steel - Cushion rubber for digital gauge protection, auto off, Ball / bladder heads, hose dock - Size: 68 x 25.4 x 18cm / 26.7" x 10" x 4.6" - Weight: 1.8kg / 3.97lb
Page 1 of 4 Next page