Fenders

- Designed for tyres up to 2.4” in width. - Fit all diameters form 26 up to 29 - Disc brake compatible - Weight: 360 g

A quick and easy clip-on fender designed to work with the Trek Blendr Saddle Bag and Blendr saddle accessory mounts. The Blendr Fendr clips onto rear saddle mounts in seconds to prevent water and road kick-up from getting you dirty. Quick and easy installation and removal keep you ready to ride no matter the weather. Plus, you can easily mount a rear light to keep you seen. Details: - Connects to the Blendr Saddle Bag mount and Blendr Saddle Accessory mount - Lightweight plastic keeps your backside dry with almost no weight penalty - Integrated light mount makes it easy to quickly add a fender and rear light - Fits into a back jersey pocket or easily into a bag - Compatible with all wheel and tire sizes for road, gravel, and commuter bikes

Accessorize your ride. Keep yourself dry. Genuine Replacement Parts No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. - Original equipment replacement fenders for Trek Powerfly - Mounting hardware sold separately - Front fenders are designed for SR Suntour suspension fork mounts, other forks may be incompatible - Front fenders are shared with Powerfly FS 2021 equipped models - Front fenders include struts - Rear fenders do not include struts as they require Powerfly HT specific rear rack for assembly Fender, rack and kickstand compatibility - Use the compatibility guide to match the right parts with your bike and simplify installation of your new accessories.

The ultimate set of mudguards for fat tire bikes offering all-round mud protection. Front is mounted easily under the down tube by high-performance straps and the rear fits to the seat post in seconds with the proven tool-free SKS quick-release Powerstrap attachment system. The two-hinge arm in the rear allows perfect adjustability to the geometry of your bike.

SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.

- Smart clip-on front mudguard for road, cyclocross, hybrid, gravel bikes, etc. - Fits a maximum tyre width up to 38mm. - It is the ideal companion to our S-BLADE rear mudguard. - Its smart, double hinged quick release fitting system also fits aero forks. - Paintwork protection film for the frame is included.

The SKS SPEEDROCKER has been specifically developed for compatibility with gravel and adventure bikes, cyclocross bikes and road bikes with tyres exceeding 32mm. Proudly Made in Germany, the Speedrocker offers incredible stability over the roughest tracks while also providing optimum protection in all weathers. - Rear fender expands for custom fit - Rubber fasteners mount to a variety of frame styles

The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support. - Compatible only with disc brakes - Includes hook-and-loop fasteners and tension rubber - Weight: 580g - Max. outer diameter: 35mm - Wheel size: 27.5" (650B), 28" - Tire width: 52mm - Length, front fender: 680mm - Length, rear fender: 870mm

Keep water and mud off you with SKS's X-Blade II Rear Fender! The high-performance dual-compound plastic is ready for wet weather action, while two moveable joints allow for perfect placement and optimum coverage.

Keep water and mud off you with SKS's X-Blade II Rear Fender! The high-performance dual-compound plastic is ready for action, while two moveable joints allow for perfect placement and optimum coverage.

Keep water and mud off you with SKS's X-Board down tube fender! This versatile fender works with most bikes regardless of wheel size thanks to its adjustable mounting straps.

No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

Don't let the weather get in the way of adventure. The RockShox branded ZEB short fender is designed to keep you dry and clean when the weather turns. It can be easily installed at three points and looks as if your fork and fender are one, leaving your friends wondering why they are still messing around with zip ties. - 3-bolt mounts make for easy installation - Designed to integrate seamlessly and look pro with RockShox branding - Compatible with all ZEB models

- Fits tubes from Ø27 to 35mm - Fits 26" to 29" wheels - Mudguard section of 55mm - Front mudguard compatible with disc brakes or V-Brake, and suspension or rigid bikes - Expander range on front and rear for perfect fitting - Includes long and short clamp depending on the space needed to clip it to the frame - Adjustable L shape steel bracket for rear and front mudguard - For an extra secure mounting of the rear mudguard we also offer a Ø 3 mm stainless steel U-stay - Mounting kit included

PDW's Full Metal Road Fenders are designed to fit road bikes that are difficult to install full-coverage fenders on. They have special hardware to get around caliper brakes and under forks, even add-on mounts for bikes that lack eyelets to mount fender stays to. They provide full-wrap coverage, even shielding riders behind you from tire spray thanks to the sturdy rubber mudflaps. Plus, safety release tabs ensure your wheels keep turning, even if debris gets lodged between the fender and tire. - Anodized aluminum - 30mm wide - Fits bikes with 700 x 23mm tires and fender eyelets - 454 grams

Following the tried and tested tire-hugging design of our MTB Mudhuggers, the GravelHugger is designed to fit most fork + wheel + tire (up to 50mm wide) combos. To reduce single-use plastic waste, and make fitting and removing easier, the GravelHugger is supplied with nitrile O-rings (70mm sizes for flat blade type and 50mm for traditional round steel forks). Zip ties (sold separately) can be utilized if you'd prefer to fit and leave them on at all times. - Suitable for 700c (Max tire width 42mm) and 650b wheels (Max tire width 50mm), depending on wheel/tire/fork combination - Designed and made in the UK from 100% recycled polypropylene - Includes Helitape and nitrile O-rings - Length: 490mm - Width: 60mm - Weight: 75g

Following the tried and tested rear Mudhugger design, will fit most bike frame seat stays and is designed for tires up to 50mm wide. The Rear GravelHugger is designed to be attached to the bike with zip ties as these afford the most secure way to fitting. However, it can also be attached utilizing hook and loop straps (sold separately), making removing and refitting easier. - Suitable for 700c and 650b wheels, Max tire width 50mm (depending on wheel/tire combination) - Designed and made in the UK from 100% recycled polypropylene - Includes Helitape and zip-ties - Length: 560mm - Width: 55mm - Weight: 200g

Initially designed to overcome the problem of fitting mudguards to a bike with a dropper seatpost, the Rear Mudhugger works well on all bikes, providing they have disc brakes. Attaching it to the seat stays overcomes all of the problems normally associated with rear mudguards. They do not move out of line, get in the way when getting on or off the bike, do not foul rear suspension travel, and are robust enough to take the rough and tumble of modern trail riding demands. The LARGE Rear Mudhugger is an all-new design for modern full-suspension bikes that have a low seat-stay angle of 26 degrees down to 22 degrees. This is an extra-long Hugger that is designed to be trimmed down to fit your bike perfectly. (it will work well on bikes with 27-28 degree seat-stays, but will be too long and need the end trimmed shorter still) - 760mm long and approx 105mm wide at the widest part - Ideal for all 29" and 27.5+ full suspension bikes - Includes frame tape and 6 zip-ties - Weight: 280g

Keep the crud off your frame with the Fox Mud Guard. Designed to fit multiple fork and wheel sizes, the Mud Guard is an essential accessory for riding in wet environments. - Universal design fits most current forks

The Fox Mud Guard is a minimalist mudguard which was specially developed for the FOX 36/38 mm suspension forks from model year 2021. The stable attachment with the help of two screws (included in the scope of delivery) enables easy installation. As a result, it stays in place even in rough terrain. Despite its small size, it meets the high expectations and effectively protects your face from dirt and mud. But not only you are well protected, your material, such as headset or suspension fork, gets less and has a longer lifespan. Technical specifications: Material: Plastic Compatibility: only suitable for FOX 36/38 mm suspension forks from model year 2021 Dimensions (WxL): approx. 115 x 190 mm Fastening: using 2 screws Color: Black

This direct-mount fender uses a proprietary and sturdy 4-point attachment to secure to the fork. The NEW XL version offers 85% more coverage than the standard version for fitment on 36 and 38 FOX Forks. The FOX 36 and 38 Mud Guard (Standard and XL) fit the following forks: - FOX 36 Performance (2021 and newer) - FOX 36 Performance Elite (2021 and newer) - FOX 36 Factory (2021 and newer) - FOX 38 Performance (2021 and newer) - FOX 38 Performance Elite (2021 and newer) - FOX 38 Factory (2021 and newer) If you aren't sure if the Mud Guard will fit, check if your fork has bleeder valve mounts on the backside of each lower leg. If your fork does not have these mounts, then it is not compatible with the FOX Mud Guard product.

Wet weather is no worry when you've got Electra's Cruiser Essential Aluminum Fenders. They're made from durable, low-maintenance aluminum and offer full coverage so you'll arrive squeaky clean. All mounting hardware is included for quick and easy installation.

Accessorize your ride. Keep yourself dry. Functional. Fashionable. Fenders. No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. - Front and rear full-length fenders designed for use on Townie Go! e-bikes - Fits both step-thru and step-over Townie Go! models - Compatible with 26" x 2.35" balloon tires - Will not fit other Townie bike models - Protects against pesky mud and splashes

Functional. Fashionable. Fenders. No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. Fenders intended for warranty and service use. - Original replacement fenders for Electra Townie bikes - Color matched for direct compatibility

A fender that is ready when you are On some rides you want a fender. This Universal Fender is designed for quick and easy installation on road, mountain, gravel, or city bikes so that riding with a fender on any bike can be a game-time decision. The versatile attachment clamp securely mounts tp most seatposts, and the front and rear set are designed to work with tire widths from 700x23 all the way up to 27.5/29 x 2.8. Product details - Front and rear fender set fits tire widths from 700x23 to 27.5/29x2.8 - Versatile fender offers simple and effective protection from the elements - Universal attachment clamp designed to fit most seatposts - Quick and easy installation or removal

This simple, creatively designed rear fender clicks into most saddle rails to help keep your backside dry when the conditions take a turn for the sloppy. Small enough to store it flat in your hydration pack so you've always got it with you. Attaches in seconds with a fold and a tug. - Built from number 5 recycleable polypropylene - 1.2mm thickness - Tool free installation

Axiom's Rackrunner Fender easily installs to your rear rack with the included hardware. Axiom reduced the impact of their manufacturing and shipping methods by designing the Rackrunner to fold flat. It's also made of strong, 100% recyclable plastic. The Rackrunner fits racks with or without platforms and can be trimmed to fit. A simple and elegant ‘instant fender’ add-on for pannier racks. - Virtually unbreakable polypropylene body - Mounts directly to rack tubing - 100% recyclable; can be trimmed to fit any rack; ships and merchandises as a flat sheet; hardware for mounting to racks with or without platforms

Benefits: Protects you from mud and water spray Added fork seal protection from dust, mud and debris Extra front protection without ruining the looks Robust AMS Style Designed and made in Barcelona Specifications: 1.2mm thick 243mm (9.6") length 39 grams Carton packaging with hook

- Light, discrete and durable polypropylene mudguard for Fat and Plus size bikes - Universal mount, fits rigid and suspension forks - 286 x 300mm - 48g

- Compatible with 16'' and 20'' wheels - Front: T steel plate mounting system - Rear: Clip with built in L shape bracket - Blade width: 55mm