On-bike

This convenient frame bag for the top tube offers additional storage space for your next micro adventure. It can be easily and securely mounted onto various frame types to carry a rain jacket, pump, and inner tube without scratching the frame. - 5-point fixtures make it easy to mount on the frame - Protective stickers prevent scratches - Durable, abrasion-resistant, and waterproof material - Two compartments with partition for smaller parts - Elastic side pockets, nutrition compartment - Material: 140/500D Shantung, Water Repellent P200D - Size: 3.5L, 220g, 15 x 47.5 x 5.5 cm

The Race Belt is a hip pack that has been optimized for use in racing with fastening options that gives the rider direct access to tools and spare parts. It's a snug-fit and comfortable carrier system that can be worn under the jersey. - Airoflex hip belt and Air Pad System for ideal carrying comfort - Perfect pocket management—a place for everything - Elastic mesh pockets with Velcro fastening in the back & on left hip - Zippable pocket on right hip - Loop for mini-pump or CO2 cartridge & inflator

Versatile mountain bike backpack with outstanding carrying comfort and intelligent pocket management. - Most versatile entry-level riding backpack - Technical, well-ventilated carrying system with extra-wide hip belt - Superior comfort, well-climatized AIR-PAD back padding - Superior pocket management - Internal tool compartment with organizer functionality - Exterior transport flap for your bike helmet - Compatible with hydration bladders up to 3 liters - Volume: 8L

Carry-on luggage trolley for weekend trips. - Telescopic handle - Cabin luggage dimensions for air travel - Smooth running & replaceable skate wheels - Lightweight: only 2.8kg

Top Tube Pack WP

- Mini bell with quick release mount - Unique bracket that tightens by simply applying pressure with finger - Exceptional sound/travel for its size - Fits 19mm to 26.4mm handlebar diameters

- Designed for tyres up to 2.4” in width. - Fit all diameters form 26 up to 29 - Disc brake compatible - Weight: 360 g

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

- Shop quality bicycle display and storage stand - Graphite ripple powdercoat over steel construction - Four-Point, Foam rubber end-Cap feet - 2 Piece design disassembles for space-Efficient storage - Standard and extreme models feature welded base construction (Extreme model accepts up to 3 inch tires) - Retail model features flat-Packed, Bolt-Together base construction - Fat rack features flat-Packed, Bolt-Together base construction and will suit tires from 3.8" To 5" with three width positions, 4.25", 4.75" And 5.25"

- ELEMNT BOLT GPS Bike Computer - TICKR Heart Rate Monitor - RPM Speed and Cadence Sensors Advantage by design Get everything you need to boost your cycling performance all at once! The ELEMNT BOLT features a patent pending design that integrates the bike computer and mount, resulting in a CFD tested, highly aerodynamic system built to be on the front of your bicycle. Not to mention, it's super easy to set-up and customize with the free companion app and features dual-band technology, wireless connection & uploads, pre-loaded global maps and routes, and so much more. The TICKR heart rate monitor, RPM Speed sensor and pair seamlessly with the ELEMNT BOLT, so that you can get live and accurate performance metrics. The Wahoo ELEMNT Bike Computers are the most integrated GPS bike computers on the market with a full list of compatible hardware and smartphone apps. Includes Mounts for ELEMNT BOLT Bike Computer and RPM Sensors ELEMNT BOLT Two sturdy and secure mount options - an integrated out-front mount and stem mount. RPM Cadence comes with a crank and shoe mount. RPM speed comes with a hub mount.

ELEMNT BOLT is purposefully built to provide a simple, intuitive ride experience in a sleek, aerodynamic design. This GPS bike computer features a 2.2 inch, 64 color screen with ambient light sensor to make it easy to see the metrics that matter most, at a glance. Perfect View Zoom, Quicklook LEDs and customizable data pages allow you to personalize your device setup to ensure it's a helpful companion from the beginning to the end of your ride. With 16GB of memory and on-device navigation features, ELEMNT BOLT can store the maps and routes you need to keep you on track and re-route on the fly. BOLT has a battery life of 15 hours and can be charged mid-ride thanks to its USB-C charging. Equipped with Bluetooth Smart, ANT+ and WiFi technology, ELEMNT BOLT pairs seamlessly with all of your cycling sensors and complimentary devices to get the most of your time training. Designed for performance and engineered for simplicity - the ELEMNT BOLT GPS Bike Computer makes every second count. The ELEMNT BOLT is a fully integrated GPS bike computer, with a full list of compatible hardware and smartphone apps. - Unique to Wahoo, the integrated out-front mount creates a cohesive system of the ELEMNT BOLT unit and mount for a sleek look and smooth riding. - The thin, lightweight, and damage-resistant Gorilla Glass helps ELEMNT BOLT can stand up to the toughest conditions. - Automatically adjusts screen brightness and LED lights as lighting conditions change both indoors and outdoors. - Vibrant, crystal clear 64-color 2.2" (55.88mm) display makes seeing your data and routes easier than ever. - A truly wireless bike computer with no plugin required (except to charge it)! There's no need to connect to your laptop to sync ride data, download maps, or update software. All of this can be done via WiFi, Bluetooth, or ANT+. - The free ELEMNT Companion App effortlessly guides you through a step-by-step set-up so that you can create customized user profiles, track performance, update maps and firmware, and share ride data effortlessly. - Integrated GPS with simple, crisp maps so you're ready wherever you are in the world. - Full support and integration with Specialized ANGi crash detection sensors What’s in the Box: -ELEMNT BOLT Unit -Integrated Out-front Mount -Stem Mount -Zip Ties -USB-C charging Cable -Quick Start Guide -Important Product Info Guide ELEMNT BOLT IS A STANDALONE BIKE COMPUTER A smartphone is necessary for setup and to have phone, email, and alert features. ELEMNT COMPANION APP SUPPORTED DEVICES IPHONE/IPAD iOS 11 or newer ANDROID Please visit our support site to check for Android compatibility. SPECIFICATIONS - Unit Dimensions 3.05" x 1.86" x .84" - Display Size 2.2 in / (55.9 mm) - Display Type 64 - Color - Display Resolution 320x240 - Weight 2.4oz (68.38 grams) - Battery Rechargable Lithium Ion - Battery Life 15 Hours - GPS Functionality Built-in - Supported Satellites GPS, GLONASS, BEIDOU Galileo, and QZSS - Water Rating IPX7 (Waterproof up to 5 ft) - Mount Types Integrated out front and Stem - Altimeter Yes - LED Lights 1 row customizable - Perfect View Zoom Buttons Yes - Ambient Light Sensor Yes - Operating Temperature -4°F to 122°F / -20°C to 50°C

A durable, carry-everything full frame pack that installs quickly to let you adventure farther. - Available in four sizes to best fit more frames and adventures - Mount with thumb screws (sold separately) to bikes with integrated boss mounts - Large main pocket and smaller compartment pocket make it easy to stay organized - Gold lining and internal mesh pockets make finding your gear a cinch - Water-resistant construction helps keep your gear dry - Durable materials and robust zippers are designed to last

A quick and easy clip-on fender designed to work with the Trek Blendr Saddle Bag and Blendr saddle accessory mounts. The Blendr Fendr clips onto rear saddle mounts in seconds to prevent water and road kick-up from getting you dirty. Quick and easy installation and removal keep you ready to ride no matter the weather. Plus, you can easily mount a rear light to keep you seen. Details: - Connects to the Blendr Saddle Bag mount and Blendr Saddle Accessory mount - Lightweight plastic keeps your backside dry with almost no weight penalty - Integrated light mount makes it easy to quickly add a fender and rear light - Fits into a back jersey pocket or easily into a bag - Compatible with all wheel and tire sizes for road, gravel, and commuter bikes

Trek CHRGtime Charging Station offers a better way to charge your cycling electronics by eliminating cable clutter. MORE CHARGE. LESS CLUTTER. Trek CHRGtime Charging Station is a better way to charge all of your cycling accessories. Neatly charge up to six cycling lights, computers, and devices in a refined enclosure that tidies up your charging area and keeps the included USB and USB-C charging cables tucked away and hidden from view. PRODUCT DETAILS - A clean, organized charging solution for cycling electronics - Stores and charges up to six cycling electronics - Single outlet cord and hidden charging cables reduce clutter - Visible LED charging indicators make it quick and easy to see charge status - Escape port allows for external charging of phones, tablets, or other accessories - Removable divider tray allows for use with larger accessories - Included stickers add custom flare and help align cables to the LED indicators - Includes power cord and six charging cables: 3x USB-C and 3x USB-micro

A light set with Kindbeam, designed to keep light on the path ahead and out of oncoming riders' eyes. Do the (b)right thing A commuter-focused light set designed to offer a better experience for you and your fellow riders. The Commuter Comp's Kindbeam keeps more light on the path ahead of you while avoiding oncoming riders' eyes, for a bright light that won't blind oncoming riders. Daytime running mode on both front and rear lights adds visibility during the day to make it a great see-and-be-seen light set option for any city or path rider. - See and be-seen light set for everything you need to ride with lights every ride, day or night - Commuter Comp R front Kindbeam keeps light on the ground ahead of you and out of oncoming riders' eyes - Flare R City delivers a wide, 35-lumen beam that's ideal for city use - DRL-specific focus, flash, and range flash patterns offer ultimate daytime visibility - Commuter Comp modes: high 450LM — 1.5hrs, low 200LM — 6hrs, day flash 300 LM — 12hrs - Flare R City modes: day flash 35LM — 8hrs, night flash 35LM — 16hrs, day steady 20LM — 3hrs, night steady 2LM — 20hrs - Blendr-compatible for integrated mounting on compatible Blendr stems, helmets, and helmet mounts - USB-rechargeable with included micro USB cable

Our best pair of lights. Daytime running lights for visibility, and Kindbeam that lights the way while staying out of oncoming riders' eyes. Do the (b)right thing A ready-for-anything light set that pairs Daytime Running Light visibility with the bright commuter Pro RT front light. Kindbeam keeps more light on the path ahead of you while avoiding oncoming riders' eyes, for a bright light that won't blind oncoming riders. It's equipped with a visible fuel gauge, wireless connection to tail light, and charge-back that allows you to use the light as a battery bank to charge gadgets. All buttoned up with a Flare RT for the top light package for any ride. - See and be-seen light set for everything you need to ride with lights every ride, day or night - Commuter Pro RT with Kindbeam keeps light on the ground ahead of you and out of oncoming riders' eyes - Flare RT provides ultimate visibility for any road, city, or path - Specifically designed focus, flash, and range flash patterns for daytime visibility for up to 2km - Commuter Pro modes: high 1000LM — 1.5hrs, low 500LM — 3hrs, day flash 300 LM — 12hrs - Flare RT Flash modes: 90LM — 6hrs, 45LM — 12hrs, 5LM — 15hrs, Steady modes: 25LM — 4.5hrs, 5LM — 13.5hrs - Blendr-compatible for integrated mounting on compatible Blendr stems, helmets, and helmet mounts - USB-rechargeable with included USB-C and micro USB cable

Our best light, bright enough for trail riding, and with Kindbeam to keep light on the trail and out of oncoming riders' eyes. Do the (b)right thing A do-it-all front light that's powerful enough for off-road riding. Kindbeam keeps more light on the trail ahead of you while avoiding oncoming rider's eyes, for a bright light that won't blind other trail users. A visible fuel gauge, wireless connection to tail light, and Charge-back that works as a battery bank for charging gadgets, round out an industry-leading set of features and make this our best front light option. - Commuter Kindbeam keeps light on the ground ahead of you and out of oncoming riders' eyes - 1000 Lumen high beam setting lights up full path or trail, ideal for use as MTB light - Wirelessly pair with Flare RT for single-button power-up on both front and rear light - Dual fuel gauge clearly shows available battery life and battery life of paired light - USB-C charging port supports chargeback for recharging phone or cycling computer on-the-go - DRL-specific focus, flash, and range flash patterns offer ultimate daytime visibility - Runtimes: high 1000LM — 1.5hrs, low 500LM — 3hrs, day flash 300 LM — 12hrs - Includes Commuter Pro RT light, Adjustable hard mount, and USB-C charging cable

Original replacement rack for Trek 920. Product details - Designed to fit forks with forward-facing eyelets at the dropout - Designed specifically for use with Trek 920 bikes Specifications - Size: One size - Rack type: Front racks - Adjustable feet: No - Disc compatible: Yes - Includes light mount: No - Weight capacity: 50 lbs (22 kg) - Material: Aluminum

Accessorize your ride. Keep yourself dry. Genuine Replacement Parts No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. - Original equipment replacement fenders for Trek Powerfly - Mounting hardware sold separately - Front fenders are designed for SR Suntour suspension fork mounts, other forks may be incompatible - Front fenders are shared with Powerfly FS 2021 equipped models - Front fenders include struts - Rear fenders do not include struts as they require Powerfly HT specific rear rack for assembly Fender, rack and kickstand compatibility - Use the compatibility guide to match the right parts with your bike and simplify installation of your new accessories.

Head and Tail Light features: - off-constant-flash-chasing - 2 x CR2032 (3V Lithium) bat. incl. - 35/70 hours of burn time (constant/ flash) - 600m visibility

Head and Tail Light features: - off-constant-flash-chasing - 2 x AAA (1.5V – LR3) - batteries included - 50/100 hours of burn time (constant/flash) - 400m visibility

The Hauler Rack is the Goldilocks of our front racks: Big enough to carry a whole lot of cargo but small enough to let you maneuver the bike with ease, it is just the right size for the Tern GSD and HSD. With an open-ended design and a handy bungee cord, the Hauler Rack is ready to carry backpacks, boxes, and other bulky items. And with mounting holes on the base, you can easily bolt a crate to the rack for a semi-permanent solution to carry groceries or smaller items. - Frame-mounted, designed to transport up to 20kg (44 lb) - Goldilocks-sized: Big enough to carry lots of cargo, small enough not to hinder maneuverability - Hauls anything from large boxes to odd-shaped items - Includes four mounting holes, ideal for attaching crates - Includes two rear-facing bottle cage mounts - Compatible with Tern bikes equipped with a Combo Mount - Fits the Tern GSD and HSD without increasing the overall length of the bike - Compatible with Quick Release CMT for easy installation/removal in under a minute

Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.

Place Dash behind the bar for improved visibility and better protection from mishaps on the trail. - Mounts to the left of the stem, holds the Dash above the stem and bars such that a crash will not break the Dash - Has a plastic clamp that requires 2.5mm allen key to tighten to handlebars - Has rubber spacer so the mount can be used on 31.8mm bars. No accessories can be bolted to the bottom of the mount. - For Stages Dash L10, L50, and M50 - Compatible with 31.8mm and 35mm bars

Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA Closure System.  Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Mattone is for the cyclist looking to carry a spare tube, CO2, multi-tool, and some cash in a discreet, water-resistant package. Internal divider holds ID, credit card, or cash while also protecting your tube from your multi-tool! Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon 'page' separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The 'page' also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high-friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain 'high and tight' under your saddle until you need to access it...no swinging, swaying, or rattling...ever. - Exterior—Sleek black finish with reflective graphics - Interior—Hi-contrast red material with separate ID, credit card, or money flap - Interior Volume—Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm

- EW-WU111 D-Fly wireless transmitter - Shifting customization, system diagnosis and firmware updates can now be done through Bluetooth Smart on smart phones and tablets, using the eTube app - Also allows to send shifting and system data to compatible cycle computers via private ANT+ protocol - Requires BT-DN110 internal battery or BM-DN100 external battery mount

Replacement Part – Oversized Handlebar Bracket (35mm) - Reinforced internals take more abuse - Fits oversized 35mm mtb bars - No tools needed - Included with USL-1100 & USL-1500 - Weight: 40 grams - Works for all Serfas headlights except for: SL-200, SL-30WP, & SL-40WP

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Wide chainline crankset for bikes with the widest gravel tires

Significantly smaller, the SRAM eTap AXS BlipBox is now easier to integrate — mounting inside a stem faceplate cap, feed box, or frame. It's also AXS enabled, for easy personalization. Simple, intuitive, aero. - Replaces standard drop bar shift levers - Simple and intuitive eTap shift logic - AXS enabled for easy personalization - Limitless aero configurations - Two ports per side for Blips - Fits the included optional stem mount - Compatible with existing eTap Blips and Clics - Mounts inside stem faceplate cap, feed box or frame

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

The ultimate set of mudguards for fat tire bikes offering all-round mud protection. Front is mounted easily under the down tube by high-performance straps and the rear fits to the seat post in seconds with the proven tool-free SKS quick-release Powerstrap attachment system. The two-hinge arm in the rear allows perfect adjustability to the geometry of your bike.

SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.

- Smart clip-on front mudguard for road, cyclocross, hybrid, gravel bikes, etc. - Fits a maximum tyre width up to 38mm. - It is the ideal companion to our S-BLADE rear mudguard. - Its smart, double hinged quick release fitting system also fits aero forks. - Paintwork protection film for the frame is included.

The SKS SPEEDROCKER has been specifically developed for compatibility with gravel and adventure bikes, cyclocross bikes and road bikes with tyres exceeding 32mm. Proudly Made in Germany, the Speedrocker offers incredible stability over the roughest tracks while also providing optimum protection in all weathers. - Rear fender expands for custom fit - Rubber fasteners mount to a variety of frame styles

The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support. - Compatible only with disc brakes - Includes hook-and-loop fasteners and tension rubber - Weight: 580g - Max. outer diameter: 35mm - Wheel size: 27.5" (650B), 28" - Tire width: 52mm - Length, front fender: 680mm - Length, rear fender: 870mm

Keep water and mud off you with SKS's X-Blade II Rear Fender! The high-performance dual-compound plastic is ready for wet weather action, while two moveable joints allow for perfect placement and optimum coverage.

Keep water and mud off you with SKS's X-Board down tube fender! This versatile fender works with most bikes regardless of wheel size thanks to its adjustable mounting straps.

No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

Handlebars are for your hands! Our machined aluminum Handlebar Stub allows you to carry most bar-mounted accessories directly on The Handlebar Bag. Each bag accepts two Handlebar Stubs via the M5 threads on each side of the bag. The Handlebar Stub allows you to carry most bar-mounted accessories directly on The Handlebar Bag. Each bag accepts two Handlebar Stubs. See install notes in the description below. Install notes: -Recommended torque: 6-8Nm, using a square-end, 3mm hex key. -Align wings on the Handlebar Stub with the slots on the Accessory Rails. *Not for use with out-front style mounts. Usage will void the warranty. Included: (1) Handlebar Stub (31.8mm diameter) (1) M5 x 0.8 x 30mm stainless steel, nylon patch FHCS, black finish Specifications Material: -machined, anodized aluminum -stainless steel, nylon patch hardware Weight: 19g / 0.6oz Dimensions: 30mm x 31.8mm diameter / 1.1in x 1.25in diameter

Whether you want to listen to some tunes or track your ride, we have a mount for your preferred technology. Description: Available in a variety of options, each one allows you to attach your preferred technology to the center of the lid on The Handlebar Bag or the Out Front Mount. -The Tech Mount from Bar Fly® is available in two versions - Garmin® or Wahoo® - with mounts for other brands available from Bar Fly Bike. **Hammerhead® Karoo2 users, select the Garmin® option and use the Garmin® quarter-turn wedge provided with your Karoo2. -Quad Lock® fits most current smartphones. Phone-specific cases sold separately at Quad Lock Case. Included: Bar Fly Tech Adaptor: (1) Bar Fly Garmin Tech Adaptor or (1) Bar Fly Wahoo Tech Adaptor Or Quad Lock: (1) Quad Lock Integrated Head Unit (1) RW Quad Lock Adaptor Chip (1) M5 x 0.8 x 20mm stainless steel, nylon patch FHCS

Finally! A bag that can be built to suit YOUR adventures. Featuring a customizable lid built to accept most cycling computers or smartphones and is designed for quick, one-handed access to storage - while on the go! An easy on/off lever and integrated shoulder strap allows you to take the bag with you - on or off the bike. Whats Included: (1) Handlebar Bag (1) RW to BarFly Plate (1) Bike Mount (fits 31.8mm diameter bars) alternate, color-matched shock cord for Lid Specifications: Materials: -Exterior fabric - 500d PU-coated Cordura -Interior fabric - 220d grid stop nylon -Polymer lid -mMachined, anodized aluminum hardware Dimensions: -145mm x 235mm x 153mm / 5.8in x 9.3in x 6in -Volume: 3.2L -Weight (bag + bike mount) - 684g -Max carry capacity: 4kg / 9lbs -Weight: Bag & Bike Mount - 684g / 1.50lbs

Don't let the weather get in the way of adventure. The RockShox branded ZEB short fender is designed to keep you dry and clean when the weather turns. It can be easily installed at three points and looks as if your fork and fender are one, leaving your friends wondering why they are still messing around with zip ties. - 3-bolt mounts make for easy installation - Designed to integrate seamlessly and look pro with RockShox branding - Compatible with all ZEB models

When a backpack is too bulky for that quick lap but your pockets just won't do the job, the Stash Quick Rip hip bag is the perfect solution. It's the perfect size for water, nutrition, and spares and it won't get in your way. - Construction: Ripstop nylon, 3D mesh backing, stretch belt - Waterproofing: Waterproof zippers - Adjustment: Single sided stretch belt adjustment - Pockets: 2 pockets + phone pocket - Hydration Capacity: Neoprene bottle holder - Reflective logo, lower carrying straps

Free Your Pockets Why carry your tools yourself? Strap them to your bike and forget about them until you actually need them. Enough room for a CO2 cartridge, a small selection of tools + tire levers, and a spare tube. - Stretch hook-and-loop strap adjustment - Ripstop nylon construction - Printed silicone grip - Tri-fold design - 3 inner pockets

- Fits tubes from Ø27 to 35mm - Fits 26" to 29" wheels - Mudguard section of 55mm - Front mudguard compatible with disc brakes or V-Brake, and suspension or rigid bikes - Expander range on front and rear for perfect fitting - Includes long and short clamp depending on the space needed to clip it to the frame - Adjustable L shape steel bracket for rear and front mudguard - For an extra secure mounting of the rear mudguard we also offer a Ø 3 mm stainless steel U-stay - Mounting kit included

PDW's Full Metal Road Fenders are designed to fit road bikes that are difficult to install full-coverage fenders on. They have special hardware to get around caliper brakes and under forks, even add-on mounts for bikes that lack eyelets to mount fender stays to. They provide full-wrap coverage, even shielding riders behind you from tire spray thanks to the sturdy rubber mudflaps. Plus, safety release tabs ensure your wheels keep turning, even if debris gets lodged between the fender and tire. - Anodized aluminum - 30mm wide - Fits bikes with 700 x 23mm tires and fender eyelets - 454 grams

Behold the Trail Evo. The sum total of our decades of experience designing automotive optics, all neatly wrapped up in the best bike light we have ever engineered. Featuring a panoramic, perfectly even beam pattern that we fine-tuned the heck out of to meet the demands of trail riding. With a smooth falloff all around you to aid peripheral vision (the beam should fall off, not the biker). With it we created a literal wall of light that illuminates your entire field of view. A quick-release fiberglass-reinforced nylon mount that we, ahem, “borrowed” from those clever camera guys to keep this bike light pointing in the right direction. Good for 150+ minutes of strong output and, should you need it, the ability to USB-C quick charge on-the-go. Proudly and capably made just down the trail in Chicago IL. What’s in the Box: Trail Evo Quick-Release Bar Mount (fits 31.8mm and 35mm bars) USB-C to USB-A Charge Cable 2.5mm Hex Wrench Instructions

Following the tried and tested tire-hugging design of our MTB Mudhuggers, the GravelHugger is designed to fit most fork + wheel + tire (up to 50mm wide) combos. To reduce single-use plastic waste, and make fitting and removing easier, the GravelHugger is supplied with nitrile O-rings (70mm sizes for flat blade type and 50mm for traditional round steel forks). Zip ties (sold separately) can be utilized if you'd prefer to fit and leave them on at all times. - Suitable for 700c (Max tire width 42mm) and 650b wheels (Max tire width 50mm), depending on wheel/tire/fork combination - Designed and made in the UK from 100% recycled polypropylene - Includes Helitape and nitrile O-rings - Length: 490mm - Width: 60mm - Weight: 75g

Following the tried and tested rear Mudhugger design, will fit most bike frame seat stays and is designed for tires up to 50mm wide. The Rear GravelHugger is designed to be attached to the bike with zip ties as these afford the most secure way to fitting. However, it can also be attached utilizing hook and loop straps (sold separately), making removing and refitting easier. - Suitable for 700c and 650b wheels, Max tire width 50mm (depending on wheel/tire combination) - Designed and made in the UK from 100% recycled polypropylene - Includes Helitape and zip-ties - Length: 560mm - Width: 55mm - Weight: 200g

Initially designed to overcome the problem of fitting mudguards to a bike with a dropper seatpost, the Rear Mudhugger works well on all bikes, providing they have disc brakes. Attaching it to the seat stays overcomes all of the problems normally associated with rear mudguards. They do not move out of line, get in the way when getting on or off the bike, do not foul rear suspension travel, and are robust enough to take the rough and tumble of modern trail riding demands. The LARGE Rear Mudhugger is an all-new design for modern full-suspension bikes that have a low seat-stay angle of 26 degrees down to 22 degrees. This is an extra-long Hugger that is designed to be trimmed down to fit your bike perfectly. (it will work well on bikes with 27-28 degree seat-stays, but will be too long and need the end trimmed shorter still) - 760mm long and approx 105mm wide at the widest part - Ideal for all 29" and 27.5+ full suspension bikes - Includes frame tape and 6 zip-ties - Weight: 280g

Don't let the tiny size fool you. Mirrycle's Incredibell Bellini is little, light and gets noticed! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. - Weight: Black & Silver 17g, Brass 28g - Dome Diameter: 28mm (1.1") - Fits handlebars with 21mm – 22.6mm (.83" – .89") outside diameters

Mirrycle's Incredibell Spring Bell offers a traditional Asian-style bell that integrates into the top cap of the headset to free up valuable handlebar space. The bell can be mounted any way you choose on the headset, and the dinger is adjustable as well. A flick of your finger and the Spring Bell rings loud and clear for all to hear. - Dome Diameter: 45mm (1.8") - Weight: Black and Silver: 26g (.9oz), Brass: 57g (2oz)

The LTD Mirrycle Mirror quickly attaches to Bontrager Isozone handlebars using the supplied wrench. It has a convex mirror for a wide field of view to help you clearly see approaching traffic. And the mirror easily adjusts to your optimum viewing angle.

The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle. - Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter

ME 2000, designed specifically for e-bike riders, is connected and powered directly by the output of the e-bike motor (Shimano, Bosch, Brose, Yamaha). Requires cable dependent on the motor system (sold separately). - Daytime Running Light - Ambient Light Sensor - MAX Lumen: 2000 - Waterproof: IPX 6 - Aluminum Alloy Case - Application: E-Bike; Road, Off-Road.

E-Cable For SHIMANO - Length: 75cm/30inch - Compatible with MJ-90XS, ME series

E-Cable For BOSCH - Length: 75cm/30inch - Compatible with MJ-90XS, ME series

SADDLE MOUNT for Magicshine Seemee 60, 100, 180, and 200. Including a saddle mount used with seat rails.

The MAGICSHINE Monteer 3500S offers up to 3500 lumens of max output as an MTB headlight. With smaller head and lightweight design, it is a good choice for various off-road ride, as a handlebar or helmet light. - Lumen: 3500 - Battery: 5,200mAh - Charging Time: 2.5-3 Hours - Waterproof: IPX 5 - Runtime: 1.5-75 Hours